Market Forge Industries 30P-STGL, 40P-STGL, 30P-STGM, 40P-STGM Maintenance Manual

UNIVERSE PLUS STGL & STGM SERIES

GAS TILTING SKILLETS

INSTALLATION - OPERATION - MAINTENANCE

OPEN LEG BASED MODELS

 30P-STGL
 40P-STGL

44 Lakeside Avenue, Burlington, Vermont 05401 USA

Telephone: [phone] Fax: [phone]

www.mi.com PN 14-0384 Rev B (3/15)

© 2014 - Market Forge Industries Inc.

CLOSED BASED MODELS

 30P-STGM
 40P-STGM

Your Service Agency’s Address:

Model

Serial number

Skillet installed by

Installation checked by

IMPORTANT

TABLE OF CONTENTS

WARNING: Improper installa­tion, adjustment, alternation,
service or maintenance can
cause property damage, in­jury or death. Read the instal­lation, operation and mainte­nance instructions thoroughly
before installing or servicing
this equipment.

INSTRUCTIONS TO BE FOL­LOWED IN THE EVENT THE
USER SMELLS GAS MUST BE
POSTED IN A PROMINENT LO­CATION. This information may
be obtained by contacting your
local gas supplier.

FOR YOUR SAFETY

Do not store or use gasoline or
other ammable vapors or liq­uids in the vicinity of this or any
other appliance.

INSTALLATION

Service Connections ..................................................... 2

Installation Instructions ................................................... 3

OPERATION

Operating Instructions .................................................... 5

Cooking Tips ............................................................ 6

Suggested Cooking Temperatures ......................................... 7

MAINTENANCE

Cleaning ................................................................ 9

The information contained in this
manual is important for the prop­er installation, use, and mainte­nance of this skillet. Adherence
to these procedures and instruc­tions will result in satisfactory
baking results and long, trou­ble free service. Please read
this manual carefully and retain
it for future reference.

ERRORS: Descriptive, typo­graphic or pictorial errors are
subject to correction. Speci­cations are subject to change
without notice.

Service Connections

MANIFOLD GAS PRESSURE AND INPUTS

W.C.

Natural Gas 3.5” 93,000 126,000

Propane 10.0” 93,000 126,000

NOTE: HIGH ALTITUDE - If equipment is to be installed
above 2,000 feet specify installation height, so that
proper gas orifices can be provided.

30 Gal.

BTU

40 Gal.

BTU

SERVICE CONNECTIONS

G Gas Connection - Supplied through 3/4” NPT

pipe. A gas shut-off valve must be installed
in supply piping convenient and adjacent to
appliance.

E Electrical Connection - 120V units supplied

with 8’ foot cord with 3 prong plug.

CW Cold Water - 3/8” O.D. NPT to faucet (Optional)

HW Hot Water - 3/8” O.D. NPT to faucet (Optional)

D Drain - 1-1/2” drain NPT (Optional)

10.5

[267]

29.69 [754]

1.68 [43]

HW

CW

CW

HW

27.94 [710]

36 [914] 30 GAL.

46 [1168] 40 GAL.
18 [457] 30 GAL.
23 [584] 40 GAL.

D

27.88 [708] 30 GAL.

37.88 [962] 40 GAL.

*OPTIONAL

E
G

25.75
[654]

DIMENSIONS ARE IN

INCHES [MM]

1.68 [43]

33 [838]

G

E

16.38

26.13 [664]

[416]

37 [940]

31.63 [803]

48.88 [1241]

41.44 [1052]

36 [914]

37.75 [959]

32.63 [829] 30 GAL.

42.63 [1083] 40 GAL.

*OPTIONAL: Pull out sliding
sink drain draw with splash shield for
open leg skillets

REAR FLANGE FOOT DETAIL

2 EQUALLY SPACED Ø 7/16 [11]
HOLDES ON 205 [63] B.C.

9.5 [241]
PAN I.D.

12 [305]

POUR

PATH

6 [152]

12.5 [318]

18.5 [470]

Figure 1

29.75 [756]

6 [152]

G

E

D

8.5 [216]

1.53 [39]

31.63 [803]

26.13 [664]

73.34 [1863]

10 [254] CLEARANCE FROM WALL

InstallatIon

2