Market Forge STHE-12-TGG User Manual

GAS TWO COMPARTMENT

G

MODELS: □ STHE-12-TGG (12-Pan)

□ STHE-16-TGG (16-Pan)

SIZE:

●

STHE-12-TGG
76” High x 24” Wide x 33” Front-to-Back
(1953mm High x 610mm Wide x 838mm Front-to-Back)

●

STHE-16-TGG
70-3/8” High x 36” Wide x 33” Front-to-Back
(1788mm High x 914mm Wide x 838mm Front-to-Back)

DESCRIPTION:

Shall be a Market Forge Model, ___________________
convection steamer with an individual gas steam gen-

erator for each cavity. AGA/CGA and NSF Certied. The
steamer shall be constructed of a satin nish stainless

steel type 304. The cooking chamber is a one piece all
welded type 316 stainless steel with coved corners. The
heavy duty door shall have an inner liner of stainless
steel with a full perimeter gasket seal, an outer liner of
one piece all welded stainless steel, and a positive lock
and seal mechanism with spring release. Each compart­ment shall be provided with removable stainless steel
pan supports. A stainless steel drip trough shall be inte­grally connected to drain to collect condensate when the
doors are opened.

The control housing shall be constructed of stainless
steel with a full access removable panel. Each compart­ment shall have individual controls which include an il­luminated three way power switch (ON/OFF/DELIME),
a pilot ready light, a pilot cooking light, an ignition light,
a 60 minute electric timer which sounds an audible sig­nal at the end of the cooking cycle, solid state generator
controls and electronic ignition for each generator. Steam

ow to the cooking chamber shall be cut off when the

door is opened and reactivated when the door is closed.

The STHE-12-TGG shall be mounted on a 24” cabinet
base. The STHE-16-TGG shall be mounted on a 36”
cabinet base. Cabinet base is constructed of #4 stainless
steel with exterior hinged door and 6” (152mm) stainless

steel legs with adjustable anged feet. The cabinet shall

house the two generators, automatic blow-down and
drain box.

CONVECTION STEAMER

JOB NAME: ________________________
ITEM NO.: _________________________
NO. REQUIRED: ____________________

STHE-12-TGG Shown

OPERATION SHALL BE BY:

□ Natural gas.
□ L.P. gas.

Gas red, stainless steel steam generator(s) operating at

0 psi (0 kg/cm2) with controls equipped for operation on
120 V, 1 pH, 60 Hz.

STANDARD FEATURES:

●

De-lime mode power setting.

●

Automatic blow-down.

●

Split water lines.

●

Thermostatically controlled drain.

●

Single drain connection.

●

Electronic ignition.

●

(4) anged feet.

●

Redundant controls and generator for each

compartment.

●

All stainless steel constructed steam generator(s).

●

Safety relief valve.

●

Left side access panel.

●

De-liming ports on front of each compartment.

●

Load Compensating Timers.

●

Constant Steam Position.

OPTIONAL ITEMS AT EXTRA COST:

□ Prison package
□ 120-minute timer
□ Casters
□ KleenSteam Water Filter System

SPEC SHEET: S-6038A

04/12

FOOD SERVICE EQUIPMENT

Two Compartment Steamer

The manufacturer reserves the right to modify materials and specications without notice.

35 Garvey Street • Everett • MA • 02149-4403

Tel: [phone] • Toll Free: [phone]

Fax: [phone] (MA and Overseas) • Fax: [phone] (Ex. MA)

E-mail: custserv@mi.com • www.mi.com

24” (610)

36” (914) STHE-16-TGG Only

28”

(711)

6” (152)

29.5”
(749)

32.13”
(816)

41”

(1041)

STHE-12-TGG

76.88” (1953)

STHE-16-TGG

70-375” (1788)

SAFETY RELIEF

VALVES

18” (457)

STHE-16-TGG

DRAIN

3.5” (89) DRAIN

1.25” (32)

1.5” (38)

2.5” (64)

15.75” (400)

1” (25)

33.13”
(841)

49.25”
(1251)

REAR FLANGED FOOT DETAIL
2 EQUALLY SPACED o7/16” (11mm)
HOLES ON 2-1/2” (63mm) B.C.

EC

GW

CW

G

D

CW

GW

EC

LEFT0RIGHT0BACK

6” (152)

CLEARANCE:

SPEC SHEET: S-6038A

04/12

G

GAS TWO COMPARTMENT

CONVECTION STEAMER

DETAILS & DIMENSION

SERVICE CONNECTIONS

Gas Powered

EC Electrical Connection - 120V, 60 Hz, 1 pH with

ground. Unless otherwise specied. Furnished

with a 6 foot cord with 3 prong plug. Max 4.0
AMPS.

G Gas Connection - 3/4” (19mm) IPS Supply line

required.

CW Condensing Cold Water - 3/8” (10mm) OD

Tubing at 25-50 PSI (1.8-3.5 kg/cm2)

GW Generator Water - 3/8” (10mm) OD Tubing at

25-50 PSI (1.8-3.5 kg/cm2)

D Drain - 2” (51mm) IPS pipe to open oor drain.

DO NOT MAKE SOLID CONNECTION TO
FLOOR DRAIN. Max Length before open air
gap opening: 24” (610mm) NO BENDS OR
ELBOWS.

Drain: 1 1/2” O.D. pipe coupled to 1 1/2” O.D. tempering

tank drain. Do not make solid connection to oor drain.

PVC and CPVC pipe are not acceptable materials for
drains

MODEL BTU/HR. kW/HR.

STHE-12-TGG 190,000 56

STHE-16-TGG 190,000 56

Two Compartment Steamer

FOOD SERVICE EQUIPMENT

PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149-4403

GAS SUPPLY PRESSURE (W.C.)

NATURAL PROPANE

6” (152mm) - 14” (354mm) 12” (305mm) - 14” (354mm)

It is our policy to build equipment which is design certied by C.S.A. and N.S.F. However, a continuing program of product improvement makes it necessary

to submit new models to the agencies as they are developed and consequently not all models bear the appropriate agency labels at all times.

IMPORTANT: Before connecting water to this unit, have
water supply analyzed to make sure that hardness is no
greater than 2.0 grains per gallon and a pH level is within
the range of 7.0–8.5. Water that fails to meet these stan­dards should be treated by the installation of a water con­ditioner. Equipment failure caused by inadequate water
quality is not covered under warranty.

MODEL SHIP WEIGHT

STHE-12-TGG 700 lbs.

STHE-16-TGG 900 lbs.

Tel: [phone] • Toll Free: [phone]

Fax: [phone] (MA and Overseas) • Fax: [phone] (Ex. MA)

E-mail: custserv@mi.com • www.mi.com