Market Forge MSEM User Manual

MARKETIER 18 GAUGE

MOBILE SHELVING

DESCRIPTION:

Shall be Market Forge Marketier Mobile Shelving Type
Number ___________________.

SOLID - Stainless Steel
Flat Surface

□ Model MSFM

LOUVERED - Stainless Steel
3/8” (310mm) Louvers with 2” (51mm) Embossments

□ Model MSLM

EMBOSSED - Stainless Steel
2” (51mm) Embossments with 2” (51mm) Flat Spaces

□ Model MSEM

SHELVES:

Shelves made from on sheet of 18 gauge material with all

four corners uniformly coped to exact contour to receive
internal corner castings in crevice-free alignment. The pe­rimeter of each shelf shall have a die-formed raised marine
edge, (3mm) high on a (7mm) radius. The lower edge of the
shelf perimeter shall be hemmed and pressed tight along

the shelf length. Shelves shall be shipped with set screws
for each corner to allow shelves to be installed or adjusted

at any desired spacing. Shelf corner castings have a hole
to take 1” O.D. shelf posts. Shelves shall be available as

required in any combination of the following widths and
lengths as designed or as shown on plans.

Shelves shall be ____ tier high (3 to 8) or as shown.

LENGTHS: WIDTHS:

30” (762mm) 14” (356mm)

36” (914mm) 18” (457mm)

42” (1097mm) 20” (508mm)

48” (1219mm) 24” (610mm)

54” (1372mm)

60” (1524mm)

NOTE: The Following sizes shall be constructed with a
reinforcing bar in the length dimensions for extra security
against sagging under exceptionally heavy loads:

□ 18” x 60”
□ 20” x 60”
□ 24” x 54”
□ 24” x 60”

The manufacturer reserves the right to modify materials and specications without notice.

JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________

POSTS:

Shall be provided with press t plastic caps at both top and
swivel casters for the base. Posts shall be marked at 2” in-

tervals to assist alignment of shelves during assembly.

Available in the following:

□ Stainless steel

Available in the following lengths:

□ 63” (1600mm)

CASTERS:

□ 5” (128mm)Ø, with ball bearings, (2) with brakes,

swivel casters, rated at 225 # per caster.

□

5” (128mm)Ø, heavy duty polyurethane wheels, all

swivel, (2) with brakes, rated at 275 # per caster.

Units shall be delivered knocked down and packages in
protective cardboard containers marked with size and ma-

terial contents.

OPTIONAL AT EXTRA COST:

□ Back Ledges.
□ End Ledges.
□ Revolving Rubber Bumpers.
□ 42” (1067mm) Posts.
□ 78” (1981mm) Posts.
□ Reinforcing bars provide security against sagging under

exceptionally heavy loads.

SPEC SHEET: R-1535H

03/11

FOOD SERVICE EQUIPMENT

Marketier Mobile Shelving

PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Toll Free: [phone] • Fax: [phone] • Outside MA Fax: [phone]

E-Mail: custserv@mi.com • Website: w w w . m f i i . c o m

MARKETIER 18 GAUGE

MOBILE SHELVING

TYPES MATERIAL MODEL TYPE

DETAILS & DIMENSION

AVAILABLE TYPES OF SHELVING

SPEC SHEET: R-1535H

03/11

Solid

(Flat Surface)

Louvered

(3/8” Louvers with 2” Embossments)

Embossed

(2” Embossments with 2” Flat Spaces)

Stainless Steel MSFM

Stainless Steel MSLM

Stainless Steel MSEM

Marketier Mobile Shelving

FOOD SERVICE EQUIPMENT

This Product is ETL Complaint with ANSI/NSF-2 Standard.

35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Toll Free: [phone] • Fax: [phone] • Outside MA Fax: [phone]

E-Mail: custserv@mi.com • Website: w w w . m f i i . c o m