Market Forge M24E Installation Manual

ME SERIES

ELECTRICALLY OPERATED BOILERS

INSTALLATION - OPERATION - MAINTENANCE

MODELS

 M24E
 M36E

44 Lakeside Avenue, Burlington, Vermont 05401 USA

Telephone: [phone] Fax: [phone]

www.mi.com PN 14-0309 Rev E (10/16)

© 2016 - Market Forge Industries Inc.

Your Service Agency’s Address:

Model

Serial number

Boiler installed by

Installation checked by

IMPORTANT

TABLE OF CONTENTS

WARNING: Improper installa­tion, adjustment, alternation,
service or maintenance can
cause property damage, in­jury or death. Read the instal­lation, operation and mainte­nance instructions thoroughly
before installing or servicing
this equipment.

FOR YOUR SAFETY

Do not store or use gasoline or
other ammable vapors or liq­uids in the vicinity of this or any
other appliance.

The information contained in this
manual is important for the prop­er installation, use, and mainte­nance of this boiler. Adherence
to these procedures and instruc­tions will result in satisfactory
baking results and long, trou­ble free service. Please read
this manual carefully and retain
it for future reference.

INSTALLATION

Introduction .............................................................. 2

Assembly ............................................................... 3

Service Connections ..................................................... 4

OPERATION

Operating Instructions .................................................... 5

MAINTENANCE

Cleaning the Boiler ....................................................... 6

ERRORS: Descriptive, typo­graphic or pictorial errors are
subject to correction. Speci­cations are subject to change
without notice.

Introduction

To the Kitchen Manager:

1. Read this manual carefully and in its entirety. Contact

Market Forge Ind., Inc. for clarication if necessary.

2. Protect your kitchen personnel from scalding and
other serious injury by providing training programs to

acquaint all equipment operators with the correct and

safe methods of operation.

3. Operators must be made aware of the consequences

of misuse. Steam producing equipment, no matter

who the manufacturer, is inherently dangerous when
misused. The possibility of serious scalding always
exists, the careless and/or untrained operator will be
injured.

4. This equipment must be maintained according to the
guidelines in this manual (see “maintenance”). Lack
of maintenance will lead to a potentially hazardous
condition and possible liability. Operators should re-

port any equipment malfunction immediately and

steps must be taken to correct the problem before

further use of the equipment is allowed.

5. Keep this manual for daily reference.

THEORY OF OPERATION FOR ELECTRIC BOILER:

An explanation of how the control system operates on au­tomatic electric boilers follows:

With the boiler lled with water to the proper level and the

heat switch is turned ON, the contactors will pull in and
permit the completion of the electric circuit to the heating
elements. When the boiler builds to its set pressure, the
pressure switch opens. This will open the circuit to the
coil in the contactor, which in turn will drop the contacts in
the contactor and shut off the electricity. As the pressure
in the boiler drops the pressure control switch will again
complete the circuit and build the boiler back to its set
pressure. To stop all steam generation place the ON/OFF
switch to the OFF position.

INSTALLATION

2