Market Forge HSEM User Manual

MARK III 16 GAUGE HEAVY

DUTY MOBILE SHELVING

DESCRIPTION:

Shall be Market Forge Mark III Heavy Duty Mobile
Shelving Type Number ___________________.

SOLID - Stainless Steel
Flat Surface

□ Model HSFM

JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________

LOUVERED - Stainless Steel
3/8” (310mm) Louvers with 2” (51mm) Embossments

□ Model HSLM

EMBOSSED - Stainless Steel
2” (51mm) Embossments with 2” (51mm) Flat Spaces

□ Model HSEM

SHELVES:

Each shelf shall be made of solid heavy duty 16

gauge material with all four corners uniformly coped

to exact contour to receive internal corner castings in
crevice-free alignment. The perimeter of each shelf
shall have a die-formed raised marine edge, (3mm)
high on a (7mm) radius. The lower edge of the shelf
perimeter shall be hemmed and pressed tight along

the shelf length. Shelves shall be shipped with set
screws for each corner to allow shelves to be installed

or adjusted at any desired spacing. Shelf corner cast­ings have a hole to take 1” O.D. shelf posts. Shelves
shall be available as required in any combination of

the following widths and lengths as designed or as
shown on plans.

Shelves shall be ____ tier high (3 to 8) or as shown.

LENGTHS: WIDTHS:

30” (762mm) 14” (356mm)

36” (914mm) 18” (457mm)

42” (1097mm) 20” (508mm)

48” (1219mm) 24” (610mm)

54” (1372mm) 27” (686mm)

60” (1524mm)

The manufacturer reserves the right to modify materials and specications without notice.

POSTS:

Shall be provided with press t plastic caps at both
top and swivel casters for the base. Posts shall be

marked at 2” intervals to assist alignment of shelves
during assembly.

Available in the following:

□ Stainless steel

Available in the following lengths:

□ 63” (1600mm)
□ 78” (1981mm)

CASTERS:

□ 5” (128mm)Ø, with ball bearings, (2) with brakes,

swivel casters, rated at 225 # per caster.

□

5” (128mm)Ø, heavy duty polyurethane wheels, all

swivel, (2) with brakes, rated at 275 # per caster.

Units shall be delivered knocked down and packages
in protective cardboard containers marked with size

and material contents.

OPTIONAL AT EXTRA COST:

□ Back Ledges.
□ End Ledges.
□ Revolving Rubber Bumpers.

SPEC SHEET: R-820Q

03/11

FOOD SERVICE EQUIPMENT

Mark III Mobile Shelving

PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Toll Free: [phone] • Fax: [phone] • Outside MA Fax: [phone]

E-Mail: custserv@mi.com • Website: w w w . m f i i . c o m

MARK III 16 GAUGE HEAVY

DUTY MOBILE SHELVING

TYPES MATERIAL MODEL TYPE

DETAILS & DIMENSION

AVAILABLE TYPES OF SHELVING

SPEC SHEET: R-820Q

03/11

Solid

(Flat Surface)

Louvered

(3/8” Louvers with 2” Embossments)

Embossed

(2” Embossments with 2” Flat Spaces)

Stainless Steel HSFM

Stainless Steel HSLM

Stainless Steel HSEM

Mark III Mobile Shelving

FOOD SERVICE EQUIPMENT

This Product is ETL Complaint with ANSI/NSF-2 Standard.

35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Toll Free: [phone] • Fax: [phone] • Outside MA Fax: [phone]

E-Mail: custserv@mi.com • Website: w w w . m f i i . c o m