Market Forge FTM-2-100LE User Manual
TWIN TILTING ELECTRIC
E
MODELS
FTM-(2)40LE - (2) 40 gallon (152 liter) electric mixer kettles
FTM-(2)60LE - (2) 60 gallon (227 liter) electric mixer kettles
FTM-(2)80LE - (2) 80 gallon (303 liter) electric mixer kettles
FTM-(2)100LE - (2) 100 gallon (379 liter) electric mixer kettles
DESCRIPTION
Market Forge Model __________ self-generating twin electric
kettle. Construction shall be welded stainless steel type 304 satin
finish. A double-wall kettle interior shall form a steam jacket around
the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispheric design for maximum heat transfer. (316 stainless steel liner
is standard on 40-gal. for high-acid content products). The tubular
legs shall be constructed of stainless steel pipe fitted with four-hole
adjustable flanged feet for securing to the floor. A sealed stainless
steel tilt mechanism shall permit the kettle to tilt forward a full 90°
for complete emptying. The tilt mechanism shall be self-locking for
positive stop action.
Kettle controls shall include a power switch, thermostat, power “on”
light (pilot light), vacuum/pressure gauge, pressure relief valve, and
low-water shutoff. Thermostat range to be 140°F to 285°F (60°C to
140°C), at a maximum pressure of 50 PSI (3.7 kg/cm2). Removable
heating elements rated at 24 KW.
Twin Mixer Kettle
The mixer is a variable-speed unit powered by a 5 hp electric motor
driving a hydraulic pump. Two agitators shall be included: a primary
stainless steel scraper/agitator, and a secondary high-speed mixer.
FOOD SERVICE EQUIPMENT
Both agitators shall be removable for cleaning, and no tools will be
required for removal.
The console front to have the main power switch, mixer lift switch,
and variable speed control.
The bridge is constructed of 10-gauge stainless steel and contains
two heavy-duty hydraulic motors to drive the agitators. The bridge
shall be power tilt, and swing 140° out of the way for kettle tilting
or cleaning.
OPERATION WILL BE BY
Electrically self-generating closed steam system equipped for
operation on:
208 Volt, 3 Ph, 60 Hz
240 Volt, 3 Ph, 60 Hz
MIXER KETTLE
JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________
FTM-(2)40LE shown with optional faucets
SHIPPING WEIGHT
FTM-(2)40LE - 1600 lbs (725 kg)
FTM-(2)60LE - 1650 lbs (747 kg)
FTM-(2)80LE - 1850 lbs (838 kg)
FTM-(2)100LE - 2150 lbs (976 kg)
OPTIONS & ACCESSORIES
(at additional charge)
Butterfly Valves
3” Manual Butterfly Valve
2” Manual Butterfly Valve
Swing Faucet on Console
33 KW Elements (n/a on FTM-(2)40LE)
440, 460 or 480 VAC, 60 Hz, 3 Phase
316 Stainless Steel Liner for High-Acid Content Products
(Standard on FTM-(2)40LE)
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
E
TWIN TILTING ELECTRIC
MIXER KETTLE
DETAILS & DIMENSIONS
ELECTRICAL CHARACTERISTICS
AVAILABLE KW AMPS PER LINE (EP1 / EP2)
MODEL STD. OPT. KW PHASE 208V 220V 240V 380V 415V 480V 600V
FTM-(2)40LE 24 N/A 24 3 81 / 67 77 / 63 71 / 58 45 / 37 41 / 34 36 / 29 29 / 23
FTM-(2)60LE 24 33 33 3 106 / 92 101 / 87 92 / 80 59 / 51 54 / 46 47 / 40 N/A
FTM-(2)80LE 24 33
FTM-(2)100LE 24 33
DIMENSIONS
MODEL A B C D E F G
FTM-(2)40LE 26 [660] 104.5 [2654] 43.25 [1099] 55 [1397] 75.63 [1921] 15.13 [384] 56 [1422]
FTM-(2)60LE 29.5 [749] 112 [2845] 49 [1245] 58.5 [1486] 80 [2032] 19.5 [495] 58 [1473]
FTM-(2)80LE 33 [838] 118.5 [3010] 49 [1245] 58.5 [1486] 80 [2032] 19.5 [495] 60 [1524]
FTM-(2)100LE 35.5 [902] 123 [3124] 49 [1245] 58.5 [1486] 85 [2159] 19.5 [495] 63 [1600]
SERVICE CONNECTIONS
Twin Mixer Kettle
HW
EP2
CW
FOOD SERVICE EQUIPMENT
HW
CW
E
F
EP1
3.75 [95]
7.38 [187]
6.75 [172]
EP1
8.63 [219]
EP2
B
2.25 [57]
WO
6 [152]
WI
[279]
A
EP1 /EP2 Power Supply - Use wire suitable for at least 90°C.
HW
CW
HW/CW Hot & Cold Water - 5/8” O.D. Tubing (Optional)
WI/WO Oil Cooler Water In/Out - 3/8” tube bulkhead union
NOTE: PVC and CPVC pipe are not acceptable materials for drains.
11
30
[762]
HW
CW
5 [127]
38.25
[971]
FLANGED FEET DETAIL
4 EQUALLY SPACED
Ø 7/16” [11MM] HOLES
ON 2.835” [72MM] B.C.
3.5 [89]
DIMENSIONS ARE IN INCHES [MM]
4 [102] MIN.
D
C
PRINTED IN U. S. A.
SPEC SHEET: 14-0225 Rev C (8/16)
The manufacturer reserves the right to modify materials and specifications without notice.
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
G (APPROX.)
www.mfii.com
Loading...