Market Forge FT-40GLS User Manual
SHORT HEIGHT
G
MODELS
FT-40GLS - 40 gallon (152 litre) gas tilting kettle
DESCRIPTION
Shall be a Market Forge model FT-40GLS, gas fired, self contained, fully insulated, steam jacketed kettle, ASME Code stamped,
National Board Registered, AGA, CGA and NSF certified for operation up to 50 PSI. A double wall kettle interior shall form a steam
jacket around the lower 2/3 of the kettle. The jacket enclosure shall
contain factory sealed distilled water. The kettle interior shall be
stainless steel, type 316 for high acid content cooking. Kettle exterior is fully insulated. The bottom of the kettle shall be of hemispherical design for superior heat circulation.
The recessed control panel is located on the front right side of the
unit, in full view of the operator and easy to use. Standard controls
include a solid state direct immersion thermostat for temperature
control from 165°F to 275°F (74°C to 135°C), water sight glass,
cooking light, pressure gauge and electronic ignition with ignition
indicator light.
Safety features include low water shut off with indicator light, pressure switch, pressure relief valve and 100% safety gas shutoff
valve.
The kettle shall pivot on trunnions connected to the power tilt
mechanism and control console. The tilt mechanism shall allow the
kettle to tilt past 90° forward for complete emptying.
Short Height Tilting Gas Kettle
FOOD SERVICE EQUIPMENT
The console shall be drip proof, stainless steel clad and shall be
supported on all welded 1-5/8” (41 mm) stainless steel legs fitted
with flange adjustable feet for securing to the floor.
OPERATION SHALL BE BY
Gas fired high efficiency power burner system for operation on 115
VAC, 1 phase, 50/60 Hz.
Natural gas
L.P. gas
SHIPPING WEIGHT
987 lbs (448 kg)
TILTING GAS KETTLE
JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________
Shown with optional cover
OPTIONS & ACCESSORIES
(at additional charge)
Pantry faucets
Single pantry faucet with swing spout (SF-18)
Double pantry faucet with swing spout (DF-18)
Single pantry kettle filler (SP-KF-L)
Double pantry kettle filler (DP-KF-L)
Draw-off valves
2” (50 mm) draw-off valve with strainer (TVT-2)
3” (76 mm) draw-off valve with strainer (TVT-3)
Solid disc for draw-off valve (TSS-)
Draw-off valve hose kit (DVHK-2)
Etched markings
Etched gallon markings (GM-40)
Etched litre markings (LM-152)
Strainers
Pour strainer (TKS-40GF).
Strainer hook (SH)
208-240 VAC operation (specify voltage)
Spring assist stainless steel cover (CH-40GF)
Correctional package
Tri-basket assembly (TBA-40GF)
Graduated measuring strip (CMS-40GF)
Pan carrier (PC-4)
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
G
SHORT HEIGHT
TILTING GAS KETTLE
DETAILS & DIMENSIONS
SERVICE CONNECTIONS
G Gas Connection - Supply gas through 3/4” pipe . A
gas shut-off valve must be installed in supply piping
convenient and adjacent to appliance.
EC Electrical Connection - Unless other wise specified,
Field Wire Electrical Connection to be 120 Volts, 60
Hertz single phase with grounding wire. Unit furnished
with 8’ cord and 3 prong plug. Total max. amps 4.0.
HW Hot Water Connection - 3/8” tubing to faucet
(OPTIONAL)
CW Hot Water Connection - 3/8” tubing to faucet
(OPTIONAL)
DIMENSIONS ARE IN INCHES [MM]
51 [1295]
2 [51]
3.63 [92]
C
H
EC
G
INSTALLATION CLEARANCE
Left Side Right Side Rear
0” [0mm] 0” [0mm] 4” [102mm]
BTU/Hour: 125,000
kW/Hour: 36.63
Gas Supply (Supply Pipe Pressure W.C.)
Natural 6”-14” (152-356mm)
Propane 11”-14” (279-356mm)
REAR FLANGED FOOT DETAIL
2 EQUALLY SPACED
Ø7/16" [11mm] HOLES
ON 2.5" [63mm] B.C.
* Use on non-combustible floors only.
* Shown with option faucet, cover and draw-off.
52.25
[1327]
Short Height Tilting Gas Kettle
FOOD SERVICE EQUIPMENT
14.75
[375]
22.5 [572]
38.5
[978]
PRINTED IN U. S. A.
SPEC SHEET: 14-0567 Rev A (3/15)
17.25 [438]
74.5
A
[1892]
POWER
ON
COOKING
LOW WATER
COOK TEMP.
OFF
10
9
1
8
2
7
3
6
4
5
PRESSURE
40
60
20
300
200
400
316 SS
TUBE AND CONNECTION
100
500
80
600
0
VENT AIR
kPa
psi
100
WATER LEVEL
18.75
[476]
G
6.38
36 [914]
37.75
[959]
8.5 [216]
H
[162]
The manufacturer reserves the right to modify materials and specifications without notice.
4 [102]
MINIMUM
EC
G
C
33.5 [891]
21
[533]
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
Loading...