Market Forge FT-20P User Manual
TILTING PEDESTAL BASE
D
MODELS
FT-20P - 20 gallon (76 liter), direct steam, tilting pedestal base
FT-30P - 30 gallon (114 liter), direct steam, tilting pedestal base
FT-40P - 40 gallon (152 liter), direct steam, tilting pedestal base
FT-60P - 60 gallon (227 liter), direct steam, tilting pedestal base
FT-80P - 80 gallon (303 liter), direct steam, tilting pedestal base
DESCRIPTION
Will be a Market Forge direct steam connected, tilting pedestal steam
jacketed kettle constructed of welded satin finish stainless steel, type 304.
A double wall kettle interior will form a steam jacket around the lower 2/3
of the kettle. The kettle bottom will be of elliptical design for superior heat
circulation. The FT-20, 30 & 40 Gallon Pedestal Tilting Kettles come standard with a 316 type stainless steel inner liner. The FT-60 & 80 Gallon
Kettles come standard with a 304 type stainless steel inner liner with the
option to upgrade to 316 type stainless steel.
Mounting frame of tubular stainless steel pipe will be formed in a yoke
fixed to a cylindrical pedestal base. Pedestal base will have four 7/16”
(11mm) holes evenly spaced for securing unit to floor.
Trunnion mounts will support the kettle to allow tilting 90°. Tilting mechanism with high position hand wheel and steam control valve will be mounted on the right side frame member. Gearbox housing and hand wheel will
be of stainless steel. Operation will be self-locking for positive stop action.
Tilting Pedestal Kettle
Unit will include as standard a steam control kit (STA-2), which includes
a Steam Trap, Check Valve, and a Line Strainer.
FOOD SERVICE EQUIPMENT
OPERATION WILL BE BY
Direct steam source at a minimum of 5 PSI (34kPa) and a maximum of
30 PSI (241kPa). Kettles are built as standard with a MAWP of 35 PSI.
STEAM FLOW REQUIREMENTS
34 lbs. (15.5 kg) steam pre hour or 1 BHP per 20 gallons (76 liters) pf
kettle capacity.
MODEL BHP/HR LBS STEAM/HR
FT-20P 1.0 34.5
FT-30P 1.5 52.0
FT-40P 2.0 69.0
FT-60P 3.0 103.5
FT-80P 4.0 138.0
SHIPPING WEIGHT
FT-20P - 225 lbs (102 kg) FT-60P - 315 lbs (143 kg)
FT-30P - 275 lbs (125 kg) FT-80P - 325 lbs (147 kg)
FT-40P - 300 lbs (136 kg)
DIRECT STEAM KETTLE
JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________
FT-40P shown
OPTIONS & ACCESSORIES
(at additional charge)
Covers
One-piece lift-off stainless steel cover
One-piece spring assist hinged stainless steel cover
Pantry Faucets
12” double pantry faucet w/swing spout & bracket
12” single pantry faucet w/swing spout & bracket
18” double pantry faucet w/swing spout & bracket
18” single pantry faucet w/swing spout & bracket
Double kettle filler
Single kettle filler
Double faucet spray hose kit w/bracket & plumbing
60” water hose with quick disconnect
Faucet bracket
Draw-off Valves
2” (50mm) draw-off valve with strainer
3” (76mm) draw-off valve with strainer
Tri-basket strainer
Etched Gallon Markings
BFT ( Ball Float Trap )
PRV ( Pressure Reducing Valve )
Pan Support
Graduated measuring stick
Wall models (consult factory)
Type 316 stainless steel liner (for high acid content)
Prison package includes: s/s plate over tangent draw-off
valve, tamper proof screws, chrome plated steam control, lockable s/s spring assist hinged cover, reinforcement bar
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
7.38 [187]
D
TILTING PEDESTAL BASE
DIRECT STEAM KETTLE
DETAILS & DIMENSIONS
DIMENSIONS
MODEL A B C D E F G H J K L M N (2”) N (3”)
FT-20P
FT-30P
FT-40P
FT-60P
FT-80P
21
[533]
24
[610]
26
[660]
29.5
[749]
33
[838]
18
[457]
20
[508]
22.5
[572]
26
[660]
28
[711]
37
[940]
37
[940]
37
[940]
40.5
[1029]
42.5
[1080]
34.75
[883]
37.75
[959]
39.75
[1010]
43
[1092]
46.5
[1181]
14.75
[375]
16.25
[413]
17.25
[438]
18.87
[479]
20.63
[524]
20
[508]
21.5
[546]
22.5
[572]
24.13
[613]
25.88
[657]
135
[343]
14
[356]
15.5
[394]
17.5
[445]
19
[483]
41
[1041]
43
[1092]
45
[1143]
48
[1219]
52
[1067]
15.25
[387]
13.25
[337]
10.75
[273]
10.25
[260]
9.75
[248]
20.5
[521]
20
[508]
18.5
[470]
19.25
[489]
20.5
[521]
59.5
[1151]
62.5
[1587]
64
[1626]
74
[1879]
76
[1930]
17.5
[445]
17.5
[445]
17.5
[445]
17.5
[445]
20.5
[521]
16.75
[425]
14.75
[375]
12.25
[311]
14.25
[362]
12.25
[311]
16.25
[413]
14.25
[362]
11.75
[298]
13.75
[349]
11.75
[298]
DIMENSIONS ARE IN INCHES [MM]
SAFETY RELIEF
Tilting Pedestal Kettle
FOOD SERVICE EQUIPMENT
VALV E
STEAM TRAP
AND STRAINER
(OPTIONAL)
VIEW A-A
4X Ø7/16 [11] EQ. SPACED
ON 16.62 [422] B.C. (20 TO 60 GALLONS)
ON 19.62 [498] B.C. (80 GALLONS)
SERVICE CONNECTIONS
45°
CR
ØA
SPRING ASSIST
HINGED COVER
(OPTIONAL)
70°
L
A
A
S
S Steam Supply - 3/4” NPS (19mm) at 5-30 PSI (0.3-
2.1 kg/cm2). Optional 5-45 PSI (0.3-3.1 kg/cm2).*
CW Cold Water - 5/8” O.D. Tubing (Optional)
HW Hot Water - 5/8” O.D. Tubing (Optional)
CR Condensate Return - 1/2” NPS (13mm)†
* Pressure reducing valve is required if incoming pressure
exceeds rating at kettle.
2” VALVE:
CLOSED 5.13 [130]
OPENED 6.88 [175]
3” VALVE:
CLOSED 7.88 [200]
OPENED 10.13 [257]
2” OR 3” TANGENT
DRAW OFF VALVE
(OPTIONAL)
POUR PATH
6.25 [159]
FAUCET (OPTIONAL)
2 [51]
S
K
JACKET
DRAIN VALVE
PRINTED IN U. S. A.
SPEC SHEET: 14-0140 Rev A (7/14)
M
E F
D
The manufacturer reserves the right to modify materials and specifications without notice.
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
MIN. CLEARANCE
SIDES
BACK
3 [76]
0
G
4 [102]
H
www.mfii.com
Loading...