Market Forge FT-12CG User Manual
GAS FIRED STEAM JACKETED
G
MODELS
FT-12CG - 12 gallon gas tilting floor kettle
DESCRIPTION
Shall be a Market Forge FT-12CG gas fired, self-contained steam
jacketed kettle. A double wall kettle interior shall form a steam
jacket around the lower 2/3 of the kettle. The jacket enclosure shall
contain factory sealed water and antifreeze. Kettle exterior is fully
insulated. The bottom of the kettle shall be hemispherical designed
for superior heat circulation.
The controls shall be integrally mounted to the kettle base and shall
include, solid state thermostat, power switch, temperature light;
ignition light, low water indicator lilght, electronic ignition, water sight
glass and pressure gauge.
Safety features, low water shut off, burner turns off automatically
when kettle is tilted, pressure switch and pressure relief valve.
The kettle construction shall be stainless steel type 304 with # 4
satin exterior finish. The interior kettle liner shall be a one piece
welded construction made with type 316 stainless steel liner. A
removeable operating handle with high heat proof knob shall be
mounted on the right. Kettle comes standard with “Clean Lock” to
hold kettle in cooking position or 105° for ease of cleaning.
Gas Tilting Kettle
OPERATION SHALL BE BY
Natural or L.P. gas, ASME Code stamped for operation up to 50
PSI. The steam kettle temperature range shall be between 150°F
FOOD SERVICE EQUIPMENT
(66°C) to 285°F (140°C).Controls shall be equipped for operation
on 120 VAC 1 phase 50/60 Hz.
43,000 BTU/HR
12.6 kW/HR
SHIPPING WEIGHT
255 lbs (116 kg)
TILTING KETTLE
JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________
OPTIONS & ACCESSORIES
(at additional charge)
Pantry Faucets
18” Single Pantry Faucet, (brackets included)
18” Double Pantry Faucet, (brackets included)
One piece lift off stainless steel cover
Stainless steel wire basket
Etched Gallon Marketings
Stainless Steel Stand with Sink/Drain - 20” High
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
G
GAS FIRED STEAM JACKETED
TILTING KETTLE
DETAILS & DIMENSIONS
SERVICE CONNECTIONS
EC Electrical Connection - Unless otherwise specified, field wire electrical connection to be 120V, 60 Hz, 1 Phase with ground-
ing wire. Unit Furnished with 8’ cord and 3-prong plug. Total max AMPS 2.0
G Gas Connection - Supply gas through 3/4” pipe. Natural 6”-14” W.C. (152-355mm). Propane 12”-14” W.C. (305-355mm).
Contact manufacturer for installation over 2,000 ft elevation.
CW Cold Water - 3/8” O.D. tubing to faucet (optional).
HW Hot Water - 3/8” O.D. tubing to faucet (optional).
4.75 [121]
3 [76]
EC
G
DIMENSIONS ARE IN INCHES [MM]
25.39
[645]
Gas Tilting Kettle
FOOD SERVICE EQUIPMENT
15.88
[403]
Ø20 [508]
Ø16.75
[425] I.D.
30 [762]
23.75
[603]
23.88 [607]
6
[152]
32.88 [835]
55.75 [1416]
49.75 [1264]
15 [381]
POUR
PATH
11.25
[286]
FLANGE FOOT DETAIL
4 EQUALLY SPACED
Ø7/16 [11] HOLES ON
3 [76] B.C.
6 [152] MIN
17.25
[438]
51.25 [1302]
EC
G
12.5
[317]
5.5
[140]
7.75 [197]
PRINTED IN U. S. A.
SPEC SHEET: 14-0216 Rev B (2/16)
The manufacturer reserves the right to modify materials and specifications without notice.
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
Loading...