Market Forge FT-10-10CE User Manual
TWIN ELECTRIC, SELF CONTAINED,
E
MODELS
FT-6-6CE - two 6 gallon (23 liter) electric kettles with center
console and base
FT-10-10CE - two 10 gallon (38 liter) electric kettles with
center console and base
FT-12-12CE - two 12 gallon (45 liter) electric kettles with
center console and base
SPECIFICATIONS
A double wall kettle interior shall form a steam jacket around the
lower 2/3 of the kettles. The jacket enclosures shall contain distilled water which is factory sealed. The bottom of the kettles shall
be of hemispherical design for superior heat circulation.
Construction shall be of all welded #4 finish stainless steel, type
304. The interior cooking surfaces shall be of type 316 stainless
steel for added resistance to corrosion. The kettles shall be ASME
Code stamped, National Board Registered, c-CSA-us and NSF
certified.
The controls shall be water resistant, integrally mounted and shall
include a power switch, solid state thermostat, pilot light, vacuum/
pressure gauge, safety valve and low water shut off with low water
light for each kettle.
The kettles shall operate in a temperature range of 165°F
Countertop Tilting Kettles
to 285°F (74°C to 140°C) at a maximum pressure of 50 psi
(345kPa). The kettle shall be standard with removable elements.
FOOD SERVICE EQUIPMENT
The stainless steel rectangular mounting base shall include the
kettle mounting lugs concealed inside the enclosure.
A removable tilt handle with heat proof knob shall be mounted on
each kettle.
STANDARD FEATURES
Low water level cut-off and indicator
Pressure gauge
Solid state temperature control
Safety relief valve
Type 316 stainless steel liner
2/3 steam jacket
50 PSI (345 kPa) high pressure operation for higher cooking
temperature
Integrally mounted controls
Removable elements
“Clean lock” to hold kettle in cooking position or 105° for ease
of cleaning
Stainless steel console and trunnion
Water resistant construction
COUNTERTOP, TILTING KETTLES
JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________
Shown with optional fantry faucet
OPTIONS & ACCESSORIES
(AT ADDITIONAL CHARGE)
Voltage options
380 VAC, 3 phase, 50/60 Hz
415 VAC, 3 phase, 50/60 Hz
480 VAC, 3 phase, 50/60 Hz
600 VAC, 3 phase, 50/60 Hz
Etched markings
Gallon markings
Litre markings
Pantry faucets
Single pantry faucet with swing spout
Double pantry faucet with swing spout
18” (46 mm) high stainless steel stand with sliding shelf
Correction package
One piece lift-off stainless steel cover
Stainless steel perforated basket
Graduated measuring strip
Pour lip strainer
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
TWIN ELECTRIC, SELF CONTAINED,
E
ELECTRICAL CHARACTERISTICS
COUNTERTOP, TILTING KETTLES
DETAILS & DIMENSION
MODEL kW PHASE
FT-6-6CE 15
FT-10-10CE
FT-12-12CE
24
DIMENSIONS
MODEL A B C D E F G H J K L
FT-6-6CE 12 [305]
FT-10-10CE
14.38
[365]
15 [381] 26 [660]
16 [406]
FT-12-12CE 17 [432] 28 [711]
SAFETY RELIEF VALVE
AIR VENT
R18.00 [R457]
Countertop Tilting Kettles
E
FOOD SERVICE EQUIPMENT
AMPS PER LINE
208V 220V 240V 380V 415V 480V 600V
1 72.0 68.2 62.6 N/A N/A N/A N/A
3 41.6 39.4 36.2 22.8 20.8 18.0 14.4
1 115.2 109.2 100.0 N/A N/A N/A N/A
3 66.6 63.0 57.8 36.6 33.4 29.0 23.0
24 [610]
1.50 [38]
33.5
[851]
34.88
[886]
36.88
[937]
5.39
[137]
15.25
[387]
47.25
[1198]
4.50
[114]
4.62
17.25
[438]
55.25
[1400]
[117]
4.12
[105]
SERVICE CONNECTIONS
ELECTRICAL CONNECTION TO BE AS SPECIFIED ON DATA PLATE
COLD WATER: 3/8” O.D. TUBING TO FAUCET (OPTIONAL)
HOT WATER: 3/8” O.D. TUBING TO FAUCET (OPTIONAL)
DIMENSIONS ARE IN INCHES [MM]
27 [686]
28 [711]
30 [762]
4.25
[108]
6.12
[156]
12.38
[314]
14.75
[375]
10 [254]
12.75
[324]
12.75
[324]
F
A ID
B
C
8X WELD NUTS
5/16-18 UNC
It is our policy to build equipment which is design certified by C.S.A. and N.S.F. However, a continuing program of product improvement makes it necessary
to submit new models to the agencies as they are developed and consequently not all models bear the appropriate agency labels at all times.
PRINTED IN U. S. A.
SPEC SHEET: 14-0064 Rev B (2/16)
14.50 [368] 14.50 [368]
4.50 [114]
36.00 [914]
The manufacturer reserves the right to modify materials and specifications without notice.
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
D
OPTIONAL FAUCET
G
L
10 [254]
12.5 [318]
H
K
1.25 [32]
J
www.mfii.com
Loading...