Market Forge F-20PF User Manual
FULLY JACKETED DIRECT STEAM
D
MODELS
F-20PF - 20 gallon (76 liter), direct steam, fully jacketed,
stationary pedestal base kettle
F-30PF - 30 gallon (114 liter), direct steam, fully jacketed,
stationary pedestal base kettle
F-40PF - 40 gallon (152 liter), direct steam, fully jacketed,
stationary pedestal base kettle
F-60PF - 60 gallon (227 liter), direct steam, fully jacketed,
stationary pedestal base kettle
F-80PF - 80 gallon (303 liter), direct steam, fully jacketed,
stationary pedestal base kettle
DESCRIPTION
Will be a Market Forge direct steam connected, stationary pedestal,
steam jacketed.
Kettle will be constructed of welded satin finish stainless steel, type
304. A double wall kettle interior will form a full jacket around the
lower of the kettle. The kettle bottom will be of elliptical design for
superior heat circulation.
The pedestal base shall have four 7/16” (11mm) holes evenly
spaced for securing unit to the floor.
Unit will include as standard a steam control kit (STA-1), and a
Steam trap that includes a steam control valve (steam inlet globe
valve), line strainer, and spring assist stainless steel cover.
Fully Jacketed Direct Steam Kettle
FOOD SERVICE EQUIPMENT
OPERATION WILL BE BY
Direct steam at 5-35 PSI (0.3-2.5 kg/cm2). An optional pressure
reducing valve is required if incoming pressure exceeds kettle rating.
STEAM FLOW REQUIREMENTS
34 lbs. (15.5 kg) steam per hour or 1 BHP per 20 gallons (76 liters)
of kettle capacity.
STATIONARY PEDESTAL BASE KETTLE
MODEL BHP/Hour Lbs. Steam/Hour
F-20PF 1.0 34.5
F-30PF 1.5 52.0
F-40PF 2.0 69.0
F-60PF 3.0 103.5
F-80PF 4.0 136.0
JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________
F-40PF shown
SHIPPING WEIGHT
F-20PF - 225 lbs (102 kg)
F-30PF - 245 lbs (111 kg)
F-40PF - 270 lbs (122 kg)
F-60PF - 295 lbs (134 kg)
F-80PF - 320 lbs (145 kg)
OPTIONS & ACCESSORIES
(at additional charge)
Pantry Faucets
Double pantry faucet with swing spout and mounting
bracket
Single pantry faucet with swing spout and mounting
bracket
Triple basket assembly
3” draw-off valve with strainer
Strainer hook
Etched Gallon Markings
Wall models (consult factory)
Graduated measuring stick
BFT - ball float trap
PRV - pressure reducing valve
Type 316 stainless steel liner for high acid content products
H.P. 50 PSI (3.5 kg/cm2) rated
Prison package, s/s plate over tangent draw-off valve, tam-
per proof screws, chrome plated steam control, lockable s/s
spring assist hinged cover, reinforcement bar
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
D
FULLY JACKETED DIRECT STEAM
STATIONARY PEDESTAL BASE KETTLE
DETAILS & DIMENSIONS
DIMENSIONS
MODEL A B C D E F G H J K L M
F-20PF
F-30PF
F-40PF
F-60PF
F-80PF
26
[660]
29.5
[749]
33
[838]
35.5
[902]
42
[1067]
15.75
[400]
17.5
[445]
19.25
[489]
20.5
[521]
23.75
[603]
37
[940]
37
[940]
37
[940]
40.5
[1029]
40.5
[1029]
27.5
[699]
31
[787]
34.5
[876]
37
[940]
43.5
[1105]
19
[483]
17.25
[438]
15.5
[394]
17.75
[451]
14.5
[368]
14.25
[362]
16
[406]
18
[457]
17.5
[445]
18.75
[476]
16
[406]
17.75
[451]
19.5
[495]
20.75
[527]
24
[610]
16.88
[429]
16.88
[429]
19.63
[498]
19.63
[498]
19.63
[498]
30.63
[778]
29.69
[754]
29.13
[740]
32.13
[816]
15.88
[403]
18.75
[476]
17
[432]
15.25
[387]
17.5
[445]
14.25
[362]
64.5
[1638]
68
[1727]
71.5
[1816]
77.5
[1969]
84
[2134]
SERVICE CONNECTIONS
DIMENSIONS ARE IN INCHES [MM]
45°
SAFETY RELIEF
VALV E
HW
CW
S
S Steam Supply - 3/4” IPS (19mm) at 5-35PSI (0.3-
2.5 kg/cm2), Optional 5-50PSI (0.3-3.5 kg/cm2)
CR Condensate Return - 1/2” IPS (13mm)
CW/HW Cold and Hot Water - 3/8” (10mm) O.D. tubing
for cold and hot water to optional kettle fill faucet
65
[1651]
68
[1727]
71.5
[1816]
77.5
[1969]
83
[2108]
OPTIONAL
FAUCET BRACKET
Fully Jacketed Direct Steam Kettle
FOOD SERVICE EQUIPMENT
3.5 [89]
B
C
NOTE: DIMENSIONS E AND F ARE BASED ON
Ø2” DRAW-OFF VALVE
PEDESTAL DETAIL
4 HOLES Ø7/16 [11]
45°
EQUALLY SPACED
ØH
D
A
M
S
J
MIN. CLEARANCE
SIDES 3 [76]
BACK 0.5 [13]
The manufacturer reserves the right to modify materials and specifications without notice.
FRONT
S
E
CLOSED 5.5 [140]
OPENED 7.5 [191]
BASED ON Ø2” DRAW-OFF VALVE
HW
CW
CR
K
F
G
PRINTED IN U. S. A.
SPEC SHEET: 14-0136 Rev B (10/15)
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
Loading...