Market Forge F-100GL User Manual
2/3 JACKETED STATIONARY
G
MODELS
F-80GL - 80 gallon, gas stationary kettle
F-100GL - 100 gallon, gas stationary kettle
DESCRIPTION
Market Forge self contained gas fired stationary steam kettle. The
kettle has double-wall construction forming a steam jacket around
the lower 2/3 of the vessel. The jacket enclosure contains factory
sealed water and antifreeze. The kettle exterior is fully insulated.
The bottom of the kettle is a hemispherical design for superior heat
circulation.
The recessed control panel is located on the front right side of the
unit in full view of the operator. Standard controls include direct
immersion thermostat, water sight glass, cooking light, pressure
gauge and electronic ignition with ignition indicator light. Safety
features include low water cut off, gas valve with gas pressure
regulator, pressure switch and a 100% safety gas shut off valve.
The kettle is mounted on stainless steel 2” quad-legs with adjustable flanged feet. The kettle has as standard equipment a spring
assisted hinged cover, a 2” (50mm) diameter draw off valve and
drain strainer.
The gas burner assembly includes a burner system with a rated
capacity of 150,000 BTU input. The pressurized steam generating
Stationary Gas Kettle
section of the kettle will be fitted with a safety valve and an automatic air eliminator valve. Kettle construction is in accordance with
the ASME code.
FOOD SERVICE EQUIPMENT
Model Input BTU/Hour Combustion Efficiency
F-80GL 150,000 78% Minimum
F-100GL 150,000 78% Minimum
OPERATION WILL BE BY
Natural or L.P. gas utilizing a high efficiency power burner system.
The steam kettle is A.S.M.E. code stamped for operation to 35 PSI
(2.5kg/cm2). Temperature range from 165° F to 265° F (74OC to
130OC).
Standard controls equipped for operation on:
120 VAC, 1 Phase, 50/60 Hz.
SHIPPING WEIGHT
F-80GL - 950 lbs (431 kg)
F-100GL - 1100 lbx (499 kg)
80 & 100 GALLON GAS KETTLES
JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________
F-80GL shown
OPTIONS & ACCESSORIES
(at additional charge)
Pantry Faucets
Single Pantry Faucet with Swing Spout
Double Pantry Faucet with Swing Spout.
Stainless Steel Tri-Basket.
316 Stainless Steel Liner for High Acid Content
Products
Graduated Measuring Strip
3” Draw-Off Valve with Strainer
Solid Draw-Off Strainer
220V - 240V, 1 pH, 50 Hz
Etched Gallon Markings
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
G
2/3 JACKETED STATIONARY
80 & 100 GALLON GAS KETTLES
DETAILS & DIMENSIONS
MODEL
SUPPLY PRESSURE (W.C.)
Natural Propane Sides Back
F-80GL 6”-14” (152-355) 11”-14” (279-355) 150,000 44 6” (152) 2” (51)
F-100GL 6”-14” (152-355) 11”-14” (279-355) 150,000 44 6” (152) 2” (51)
* Use on non-combustible oors only.
SERVICE CONNECTIONS
EC Electrical Connection - 120 Volt, 60Hz, 1Ph, furnished with 6 ft. cord with 3 pronged plug. Total Max. Amps 2.0.
G Gas Connection - 3/4” (19mm) N.P.T. A gas shut-off valve must be installed in supply piping convenient and adjacent to unit.
28.63
[727]
25.63
[652]
OPEN 6.88 [175]
CLOSED 5 [128]
45°
22.5°
Ø2 [51]
VALV E
Stationary Gas Kettle
23.5 [598]
FOOD SERVICE EQUIPMENT
18.8 [478]
18.88
[479]
23.75 [603]
G
14.19 [358]
8.13 [207]
EC
BTU/Hr. kW/Hr.
DIMENSIONS ARE IN INCHES [MM]
FLANGED FEET DETAIL
4 EQUALLY SPACED
Ø 7/16 [11] HOLES ON
3 [76] B.C.
Ø35.63 [905] B.C.
MINIMUM CLEARANCE*
60°
30°
Ø41.63 [1057]
Ø35.5 [902]
25.375 [645]
F-80GL
30 [762]
F-100GL
6 [152]
PRINTED IN U. S. A.
SPEC SHEET: 14-0227 Rev A (7/14)
OPTIONAL FAUCET
88 [2235]
F-80GL
92.63 [2352]
F-100GL
44.63 [1135]
F-80GL
EC
7.2 [184]
G
The manufacturer reserves the right to modify materials and specifications without notice.
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
49.25 [1251]
F-100GL
16.75
[424]
EC
G
www.mfii.com
Loading...