Market Forge ETP-10G User Manual
ETP-10G ECO-TECH PLUS
G
MODEL
ETP-10G - (2) five pan gas atmospheric steamers
DESCRIPTION
The Eco-Tech Plus Atmospheric Steamer from Market Forge
Industries is a stainless steel atmospheric steamer with two cooking compartments, each with an independent close-coupled atmospheric 42,000 BTU gas steam generator.
Benefits: The Eco-Tech Plus incorporates a water management
system that reduces the amount of water used to condense generated steam, resulting in substantial savings on energy-related costs.
Industry First!: The ETP-10G is the only Atmospheric Twin
Generator Steamer that comes complete with a self contained water
filter system.
The Energy Star rating may qualify for rebates in your state. Consult
your local utility company for details.
Construction: Eco-Tech Plus cooking compartments and cabinet
are stainless steel with unitized body construction. Cabinet will be
mounted on four 6” adjustable stainless steel flanged feet. Cooking
compartments have removable left, right, and rear body panels.
Each cooking compartment has a positive, fully insulated, slamaction door constructed of Type 316 stainless steel. Door gasket is
a one-piece, NSF Approved silicone rubber gasket mounted on the
Atmospheric Steamer
inside of the door. Compartments are equipped with door interlock
switches that automatically cut off power to the gas valve when the
doors are opened.
FOOD SERVICE EQUIPMENT
TECHNICAL SPECIFICATIONS
Cooking Compartments:
Stainless steel pan support racks
Type 316 stainless steel liner
The front edge of the bottom compartment contains a conden-
sate drip trough that drains automatically to a water management tempering tank
Operation:
One powerful 42,000 BTU steam generator per compartment
(84,000 BTU required for entire unit)
Generators are held in the “ready” mode for quick response to
heavy-demand situations
Generator chambers are mounted at the rear of the steamer
cavity and close-coupled to the steam compartment
Standard automatic water level control, low-water cutoff, safety
relief valve, and preheat thermostat (190°F) and high limit.
Each generator includes an access port for Total Concept
delimer/descaler
GAS ATMOSPHERIC STEAMER
®
Controls:
Separate controls for each compartment
On/off power switch and 60-minute electromechanical timer
Exclusive mode selector gives the operator the option of
using each cooking cavity as a holding cabinet
JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________
CAPACITY
(9) 12” x 20” x 1” deep pans
(5) 12” x 20” x 2-1/2” deep pans
(3) 12” x 20” x 4” deep pans
SHIPPING WEIGHT
525 lbs (238 kg)
OPTIONS & ACCESSORIES
(at additional charge)
Pans & Covers
12” x 20” pan cover
12” x 20” x 1” solid pan
12” x 20” x 1” perforated pan
12” x 20” x 2-1/2” solid pan
12” x 20” x 2-1/2” perforated pan
12” x 20” x 4” solid pan
12” x 20” x 4” perforated pan
12” x 20” x 6” solid pan
12” x 20” x 6” perforated pan
Casters with gas hose strain relief
Prison package, includes lockable stainless steel hinged
control cover, tamper proof screws
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
G
10 [254]
ETP-10G ECO-TECH PLUS
®
GAS ATMOSPHERIC STEAMER
DETAILS & DIMENSIONS
SERVICE CONNECTIONS
G Gas Connection - 3/4” (19mm) Male NPT. 84,000
BTU’s.
CW Cold Water - 3/8” (10mm) NPT, Maximum 50 PSI,
Minimum 25 PSI.
D Drain - 1-1/2” NPT male from the drain adapter (see
illustration)
EC Electrical Connection - 120 Volts AC, 60 Hz, single
phase, comes with 6 foot cord. NEMA 5-15. Total
Amps: 2
INSTALLATION CLEARANCE
Left Side Right Side Rear
3 6 6
GAS CONNECTION
3/4” NPT male
3 1/2” W.C. natural
10” W.C. propane
NOTES: If the equipment is to be installed where the elevation
exceeds 2,000 ft. (609.6 meters) above sea level, specify installation altitudes so that the proper gas orifices can be provided.
Rated Input: 42,000 BTU per compartment.
All service connections are made at the rear of the unit.
Atmospheric Steamer
NOTES: PVC and CPVC pipe are not acceptable materials for
drains.
FOOD SERVICE EQUIPMENT
WATER SUPPLY
Good quality water feed is the responsibility of the owner. Water
quality must be within the following general guidelines.
TDS: 40-125 ppm Chlorides: <25 ppm
Silica: <13 ppm pH: 7.0 - 8.5
Chloramine: <0.2 ppm Chlorine: <0.2 ppm
Hardness: 35-100 ppm
The best defense against poor water quality is a water treatment
system designed to meet your water quality conditions.
Appliance to be installed with backflow protection according to
federal, state or local codes.
DIMENSIONS ARE IN INCHES [MM]
24 [610]
2.75 [70]
4 [102]
6.25 [159]
4 [102]
16.75 [425]
cw
76.25 [1937]
EC
64 [1626]
6 [152]
9.75
[248]
G
CW
EC
D
21.13 [537]
1 [25]
3.75 [95]
G
D
33 [838]
REAR FLANGED
FOOT DETAIL
2 EQUALLY SPACED
Ø7/16” [11] HOLES
ON 2.5 [63] B.C.
12 [305]
DRAIN ADAPTER
10 [254]
23.75 [603]
PRINTED IN U. S. A.
SPEC SHEET: 14-0075 Rev C (7/16)
The manufacturer reserves the right to modify materials and specifications without notice.
44 Lakeside Avenue, Burlington, VT 05401 USA • Tel: (802) 658-6600 • Fax: (802) 864-0183
www.mfii.com
Loading...