Market Forge DRSF User Manual

MARK III 16 GAUGE HEAVY DUTY

DUNNAGE RACK

DESCRIPTION:

Shall be Market Forge Mark III Heavy Duty Dunnage
Rack(s) Type Number ____________.

JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________

Stationary

SPEC SHEET: R-1871K

03/11

SOLID - Stainless Steel
Flat Surface

□ Stationary Model - DRSF
□ Mobile Model - DRSFM

LOUVERED - Stainless Steel
3/8” (310mm) Louvers with 2” (51mm) Embossments

□ Stationary Model - DRSL
□ Mobile Model - DRSLM

EMBOSSED - Stainless Steel
2” (51mm) Embossments with 2” (51mm) Flat Spaces

□ Stationary Model - DRSE
□ Mobile Model - DRSEM

Units shall be available in the following:

LENGTHS: WIDTHS:

□ 30” (762mm) □ 18” (457mm)
□ 36” (914mm) □ 20” (508mm)
□ 42” (1097mm) □ 24” (610mm)
□ 48” (1219mm) □ 27” (686mm)
□ 54” (1372mm)*
□ 60” (1524mm)*

* 54” and 60” units are constructed with 6 legs and are not
available as mobile units.

Mobile

CONSTRUCTION:

Each rack shall be made from on sheet of 16 gauge mate-

rial with all four corners uniformly coped to exact contour to

receive internal corner castings in crevice-free alignment.

Shelves shall be shipped with set screws for each corner.

Stationary units 30”, 36” and 48” long shall be equipped with
four gusset type legs. Units 54” and 60” long equipped with six
gusset type legs, constructed of 12 gauge material with 1.25”
O.D. tubular inserts. All stationary units shall be equipped with

adjustable bullet feet and shall provide for an overall unit height
of 12” (305mm).

Mobile units are available through and including 48” long and

shall be equipped with four gusset type legs constructed of 12
gauge material with 1.25” O.D. tubular inserts and four 5” E
heavy duty swivel casters. Two Casters shall be equipped with
breaks and all four with rubber tiers and ball bearing swivels.

Overall size 12” (305mm).

FOOD SERVICE EQUIPMENT

Dunnage Rack

The manufacturer reserves the right to modify materials and specications without notice.

PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Toll Free: [phone] • Fax: [phone] • Outside MA Fax: [phone]

E-Mail: custserv@mi.com • Website: w w w . m f i i . c o m

MARK III 16 GAUGE HEAVY DUTY

DUNNAGE RACK

AVAILABLE TYPES OF SHELVING

TYPES MATERIAL MODEL TYPE

DETAILS & DIMENSION

SPEC SHEET: R-1871K

03/11

Solid

(Flat Surface)

Louvered

(3/8” Louvers with 2” Embossments)

Embossed

(2” Embossments with 2” Flat Spaces)

Stainless Steel

Stainless Steel

Stainless Steel

DRSF Stationary

DRSFM Mobile

DRSL Stationary

DRSLM Mobile

DRSE Stationary

DRSEM Mobile

Dunnage Rack

FOOD SERVICE EQUIPMENT

This Product is ETL Complaint with ANSI/NSF-2 Standard.

35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Toll Free: [phone] • Fax: [phone] • Outside MA Fax: [phone]

E-Mail: custserv@mi.com • Website: w w w . m f i i . c o m