Market Forge DFFG-50 User Manual

G

MODEL: □ DFFG-50

HEAVY DUTY TUBE FRYER

JOB NAME: ________________________
ITEM NO.: _________________________
NO. REQUIRED: ____________________

SIZE:

(395mm Wide x 1162mm High x 775mm Front-to-Back)

DESCRIPTION: The Market Forge DFFG-50 Heavy
Duty Tube Fryer provides as standard many of the op­tional upgrades normally offered at a premium on other
fryer lines.

This 50 lb. Tube Fryer is designed for easy maintenance
and maximum performance at an affordable cost.

The heavy gauge 304 stainless steel vessel is solidly
constructed for durability and the integral tubes ef cient­ly transfer heat for fast start up and recovery. Controls
are located for convenience in operation, the large 1-1/4”
diameter oil drain valve is positioned to drain oil faster
without interfering with fryer controls. The sides, front,
door and top are constructed of easily cleaned stainless

steel.

The Market Forge Heavy Duty Range offers as standard,
features that are  rst in the industry and innovations,
such as:

•

•

•

•

•

•

•

•

•

•

15 1/2” Wide x 45 3/4” High x 30 1/2” Front-to-Back

All stainless steel front and sides.
50 lb. fry compound capacity, fl oor unit.
No fl ue assembly required.
Large frying area.

304 Stainless steel vessel.

Cast iron burners each rated at 38,000 BTU/hr.
Millivolt control system with 100% safety shut-off.
Thermostatic control with 200o - 400oF range.
Twin fry baskets with plastic coated handles for ease
of handling.
6” adjustable legs.

Shown on Optional Casters

OPTIONS AT EXTRA COST:

□ Casters, (set of 4, 2 with brakes)
□ Extra Standard Sized Baskets
□ Full Size Basket
□ Quick Disconnect (3/4” gas hose with restraining

device)

□ Stainless Steel Joiner Strips (Connect two adjacent

units)

□ Stainless Steel Cover
□ Stainless Steel Splash Guard (Easily removable with

no special tools)

□ Drain Station, matches fryer with cabinet storage

below ( includes pan with screen and Heat Lamp).

SPEC SHEET: S-6136

08/12

FOOD SERVICE EQUIPMENT

50 lb. Heavy Duty Tube Fryer

The manufacturer reserves the right to modify materials and speci cations without notice.

An Employee Owned Company

PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Fax: [phone] (Ex. MA) • [phone] (MA and Overseas)

E-Mail: CUSTSERV@m i.com • Website: www.m i.com

G

HEAVY DUTY TUBE FRYER

Model Cooking Area No. of Burners Total BTU’s Ship Weight Crated Dimensions

DETAILS & DIMENSION

DFFG-50

(50 lbs.)

NOTE: Specify type of gas and altitude is over 2,000 feet, when ordering

SPEC SHEET: S-6136

08/12

14” x 14”

(356mm x 356mm)3@ 38,000 BTU

114,000 210 lbs. 32.5” D x 44” H x 18 W

Gas Connection:

3/4” NPT on the left hand rear of the appliance. No
external pressure regulator required.

Gas Pressure: □ Natural Gas - 4” W.C.
□ Propane - 11” W.C.

Installation Clearance:

When installing against combustible surfaces (side
walls) is 6” (152mm) and (rear walls) is 6” (152mm)

clearance is required. When installing against non­combustable surfaces (rear or side walls) 0” clear­ance is required.

50 lb. Heavy Duty Tube Fryer

FOOD SERVICE EQUIPMENT

CSA & CSA Certied. NSF Standards.

An Employee Owned Company

PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Fax: [phone] (Ex. MA) • [phone] (MA and Overseas)

E-Mail: CUSTSERV@mi.com • Website: www.mi.com