E
AUTOMATIC WATER METER
JOB NAME: ________________________
ITEM NO.: _________________________
NO. REQUIRED: ____________________
SPEC SHEET: S-2347A
02/12
MODELS: □ AWM-1
(
□ AWM-2
(
SIZE: 22.75” Wide x 13.75” High x 8” Front-to-Back
(
Height with Faucet 40.75” (
DESCRIPTION:
Market Forge model __________ shall be electrically powered automatic water meter. Water meter housing shall be
type 304 stainless steel with sealed water resistant control panel. Water volume setting control with L.E.D. digital readout, power ON/OFF switch, START and CANCEL
controls.
The automatic water meter shall also include as standard
a 18” swivel spout faucet designed to deliver water to one
or two units depending on placement of meter. Unit is intended for countertop mounting, but may be wall mounted
as well.
578mm Wide x 349mm High x 203mm Front-to-Back
Controls in Front)
Controls on the Side)
1035mm)
The manufacturer reserves the right to modify materials and specications without notice.
AWM-2 Shown
)
The automatic water meter is designed to deliver 1-999
gallons of cold water at 1-10 gallons per minute and shut
off automatically at the end of the ll cycle, or when the
CANCEL switch is pushed. The unit shall be serviceable
from the front through the removable access panel.
OPERATION
SHALL BE BY: Electrically at:
□ 120 VAC, 1 pH, 50/60 Hz
OPTIONAL AT EXTRA COST:
□ Litre Graduations.
□ Flexible Kettle Fill Spray Hose, 5 or 6 foot.
□ 220 Volt Connection, 1 pH, 50/60 Hz
FOOD SERVICE EQUIPMENT
Electric Water Meter
35 Garvey Street • Everett • MA • 02149-4403
Tel: (617) 387-4100 • Toll Free: (866) 698-3188
Fax: (617) 387-4456 (MA and Overseas) • Fax: (800) 227-2659 (Ex. MA)
E-mail: custserv@mi.com • www.mi.com
E
AUTOMATIC WATER METER
SERVICE CONNECTIONS
Electrically Operated
E Electrical Connection – 3 - Prong Plug, 125V.
CW Cold Water – Brass Pipe, 3/4” MPT.
WATER CONNECTION: ELECTRICAL CONNECTION:
3/4” MPT at base of unit. NEMA 5-15P cord and plug 6’ (2 m) long.
DETAILS & DIMENSION
SPEC SHEET: S-2347A
02/12
Electric Water Meter
FOOD SERVICE EQUIPMENT
It is our policy to build equipment which is design certied by U.L., C.S.A. and N.S.F. However, a continuing program of product improvement makes it necessary
to submit new models to the agencies as they are developed and consequently not all models bear the appropriate agency labels at all times.
PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149-4403
Tel: (617) 387-4100 • Toll Free: (866) 698-3188
Fax: (617) 387-4456 (MA and Overseas) • Fax: (800) 227-2659 (Ex. MA)
E-mail: custserv@mi.com • www.mi.com