V. 14.March.2018
OWNER’S MANUAL
is not tropical”
that may be of suf�icient magnitude to constitute
a risk of shock to persons.”
maintenance (servicing) instructions in the
literature accompanying the product.”
not exceeding 2000 m”
MORE INFORMATION
For warranty and service information, please contact your local Markbass distributor (contact information available at www.mark
Support page. We hope you enjoy your power amp and use it to make great music!
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions;
2) Keep these instructions;
3) Heed all warnings;
4) Follow all instructions;
5) Do not use this apparatus near water;
6) Clean only with dry cloth;
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions;
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
produce heat;
9) Do not defeat the safety purpose of the polarized or ground-type plug. A polarized plug has two blades with one wider tha
other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, cons
electrician for replacement of the obsolete outlet;
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point wher
they exit from the apparatus
11) Only use attachments/accessories specied by the manufacturer;
12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from the tip-over (and Fig 2
Tipping Cart Symbol).
13) Unplug this apparatus during lightning storms or when unused for long periods of time;
14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, su
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus h
exposed to rain or moisture, does not operate normally, or has been dropped;
15) “WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS”.
16) TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE
AC RECEPTACLE;
17) THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REAMIN READILY ACCESSIBLE.
18) In case of voltage selector make sure the switch on the rear panel is on the correct voltage before connecting it to the AC
and the fuse is the right value for that voltage (This selector is not available on the 100V version).
Please change the voltage/fuse values label located near the voltage selector matching the voltage/fuse values when you
to change the voltage of the apparatus.
19) “WARNING: THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR OR WALL IN ACCORDANCE WITH INSTALLATION
ISTRUCTION. TIPPING, SHAKING, OR ROCKING THE MACHINE MAY CAUSE INJURY OR DEATH.”
20) “CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN TEH OPERATING INSTRUCTIONS UNLESS
YOU ARE QUALIFIED TO DO SO”
PRÉCAUTIONS D’EMPLOI
1) Lire ces instructions;
produit de
ises de
lessure du
accorder à
RISQUE DE CHOC ÉLECTRIQUE NE PAS EFFECTUER TOUT ENTRETIEN AUTRE QUE CELLES CONTENUES DANS TEH MODE D'EMPLOI
2) Conserver ces instructions;
3) Suivre tous les conseils d’utilisations;
4) Suivre toutes les instructions;
5) Ne pas utiliser cet appareil au bord de l’eau;
“The Lightning Flash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of uninsulated
“dangerous voltage” within the product enclosure
“The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
that
ult an
as been
power,
6) Nettoyer uniquement avec un chion humide;
7) Ne pas bloquer le système de ventilation. Installer conformément aux instructions du fabricant;
8) Ne pas installer l’appareil près d’une source de chaleur tel qu’un radiateur, un fourneau, ou bien un autre appareil qui
la chaleur;
9) Ne pas modier le système de sécurité de la che polarisée ou de de la che pour les prises de terre. Une che polarisée a deux
n the
broches, l’une étant plus distante de l’autre. Une che pour prise de terre a deux broches et une pointe pour la masse.
La broche plus distante et la pointe pour la masse ont été installées pour votre sécurité. Si la che fournie de rentre pas dans
votre prise de courant consulter un électricien pour la substitution;
10) Protéger le cordon d’alimentation an qu’il ne soit pas piétiné ou écrasé tout particulièrement au niveau des ches, des pr
e
courant femelles, et des parties qui sortent de l’appareil;
11) Utiliser uniquement les accessoires recommendés par le fabricant;
12) Utilisez uniquement avec le chariot, le socle, le trépied, le support ou la table spéciés par le fabricant ou vendu avec l’appareil.
Lorsque vous utilisez un chariot, soyez prudent lorsque vous déplacez l’ensemble chariot / appareil pour éviter toute b
1 DU
renversement (et la gure 21 DU Tipping panier Symbol).
13) Ne pas branché l’appareil en cas d’orage accompagné d’éclairs. Le débrancher en cas de non utilisation prolongée;
14) S’adresser à un service assistance agréé si l’appareil a subi des dommages, si le cordon d’alimentation ou la che a été
ch as
endommagé, si un liquide a été renversé sur l’appareil ou bien si un object est tombé dans l’appareil, si ce dernier a été exposé à
la pluie ou à l’humidité, s’il ne fonctionne pas correctement ou s’il est tombé;
15) “AVERTISSANT: POUR RÉDUIRE LE RISQUE DU FEU OU DE DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU
L’HUMIDITÉ ET LES OBJETS REMPLIS DE LIQUIDES; TELS QUE DES VASES, NE DEVRAIENT PAS ÊTRE PLACÉS SUR CET APPAREIL”;
16) POUR DÉCONNECTER COMPLETEMEN L’APPAREIL DU RESEAU D’ALIMENTATION, DÉCONNECTER LE CORDON D’ALIMENTATION
DE LA PRISE MURALE;
17) LA PRISE DU RESEAU D’ALIMENTATION DOIT DEMEURER AISEMENT ACCESSIBLE.
18) En cas de sélecteur de tension s'assurer que l'interrupteur sur le panneau arrière est sur la bonne tension avant de le r
l'alimentation secteur et le fusible est la bonne valeur pour que la tension (Ce sélecteur n'est pas disponible sur la version 100V).
S'il vous plaît changer la tension / valeurs de fusibles étiquette située près du sélecteur de tension correspondant aux valeurs /
need
fusibles de tension lorsque vous avez besoin de changer la tension de l'appareil.
19) “AVERTISSEMENT: CET APPAREIL DOIT ÊTRE ASSUJETTI AU PLANCHER OU AU MUR CONFORMÉMENT AUX INSTRUCTIONS
D’INSTALLATION. LE FAIT DE L’INCLINER, DE LE BALANCER OU DE L’AGITER PEUT CAUSER DES BLESSURES OU LA MORT.”
20) “ATTENTION: CES INSTRUCTIONS D'ENTRETIEN SONT DESTINÉES PAR PERSONNEL QUALIFIÉ SEULEMENT . POUR REDUIRE LE
SAUF SI VOUS ÊTES QUALIFIÉ POUR LE FAIRE”
bass.it). For more technical information, please visit us at www.markbass.it and ll out the form on the
“To be used only
with altitude
“To be used only
where the climate
02
MARKBASS LITTLE MARCUS SERIES
Marcus Miller is renowned for his groundbreaking style and trademark sound, and Marco De Virgiliis is considered an innovator being the rst pioneer introducing
lightweight, portable, powerful and great sounding bass heads and cabinets.
The Little Marcus amps are the result of the meeting of these groundbreaking roads.
It’s not just an endorsement but it is dream coming true!
MARCUS & MARCO
- Marcus: “We don’t wanna make an amp to let you sound just like me, this is
gonna be something where you’re gonna be free to be whoever you want. A
lot of amps force you to be a certain bass player. That’s cool in some ways. But
what happens if just one day you’re in a situation where you need a dierent
tone where you need to cut through in a dierent way because of the hall or
the crowd? You don’t wanna be limited.”
- Marco: “We’re following you because you know what you want and we know
we can do it”
- Marcus: “A lot of people have ideas, but being able to achieve the idea it’s a
whole another thing”
- Marco: “Since the moment when I started building my very rst amp I’ve
been thinking about you. So this is dream coming true for me, working and
developing an amp for you! Thank you Marcus!”
________________________________________________________________
“I can immediately get my sound from my “Little Marcus” signature heads. But
these amps not only let you sound like me, thanks to the ve band EQ and the
new “Old School” and “Millerizer” lters, you can get ANY tone you need, no
limits!!!”
MARCUS MILLER
03
TECHNICAL SPECS
INPUTS
INPUT: Impedance 500 Kohm/ maximum voltage 9 Vpp
EFFECT RETURN: Impedance 33 Kohm/ maximum voltage 10Vpp
CONTROLS
GAIN: -46 to 23dB range
MASTER VOLUME
LINE OUT LEVEL
MUTE switch
GROUND LIFT (switch on rear panel)
PRE/POST EQ (switch on rear panel)
FSW input for (optional) footswitch to turn on/o EQ1 and EQ2
EQ1
ULTRALOW: level ±16 dB (freq. 65 Hz)
LOW: level ±16 dB (freq. 180 Hz)
MID: level ±16 dB (freq. 500 Hz)
HIGH MID: level ±16 dB (freq. 1.4 KHz)
HIGH: level ±16 dB (freq. 3.8 KHz)
EQ2
OLD SCHOOL: variable LOW PASS from 20 KHz to 200 Hz
MILLERIZER: 5-12 KHz BAND PASS Filter (Level 0 /+10 dB)
OUTPUTS
LINE OUT: balanced XLR, maximum voltage 20 Vpp
EFFECT SEND: unbalanced, max voltage 20Vpp (pre EQ)
TUNER OUT: unbalanced, max voltage 2Vpp
SPEAKER OUT: speakon/ 1/4” jack COMBO connector
OTHER:
WEIGHT: 6.61 lbs/ 3 kg
(LITTLE MARCUS / LITTLE MARCUS 250 / LITTLE MARCUS 1000)
WEIGHT: 5.29 lbs/ 2.4 kg
(LITTLE MARCUS 800)
WIDTH: 10.87”/ 27.6 cm
DEPTH: 9.84”/ 25 cm
HEIGHT: 3.27” / 8.3 cm
OUTPUT POWER: 250W RMS @ 4 ohms / 150W RMS @ 8 ohms
(LITTLE MARCUS 250 / MARCUS MILLER CMD 102/250)
OUTPUT POWER: 500W RMS @ 4 ohm / 300W RMS @ 8 ohm
(LITTLE MARCUS / MARCUS MILLER CMD 102/500 / MARCUS MILLER CMD 103)
OUTPUT POWER: 800W RMS @ 4 ohm / 500W RMS @ 8 ohm
(LITTLE MARCUS 800)
OUTPUT POWER: 1000W RMS @ 4 ohm / 600W RMS @ 8 ohm
(LITTLE MARCUS 1000)
POWER REQUIREMENT: 100V; 120V; 230V; 240V - 50/60Hz
(Voltage is factory preset according to region of sale).
MARCUS MILLER CMD 102/250 - MARCUS MILLER CMD 102/500
2x10 + TWEE TER
dimensions: 23.18”/58,9cm | 14.33”/41,8cm | 16.45”/36,4cm
weight: 36.81lbs/16,7kg (CMD 102/250) | 36.37lbs/16,5kg (CMD 102/500)
MARCUS MILLER CMD 103
3x10” + VOICE COIL
dimensions: 23.38”/59,4cm | 18.89”/48cm | 27.51”/69,9cm
weight: 51.8lbs/23,5kg
Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and are factory
preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.
NOTE: Product specications are subject to change without notice.
FUSES: LITTLE MARCUS 250 LITTLE MARCUS
T 6.3A 250V for 100V setting; T 10A 250V for 100V setting;
T 6.3A 250V for 120V setting; T 8A 250V for 120V setting;
T 3.15A 250V for 230V/240V setting T 4A 250V for 230V/240V setting
LITTLE MARCUS 800 LITTLE MARCUS 1000
T 10A 250V for 100V setting; T 12A 250V for 100V setting;
T 8A 250V for 120V setting; T 10A 250V for 120V setting;
T 6.3A 250V for 230V/240V setting T 8A 250V for 230V/240V setting
04
LITTLE MARCUS 250 / MARCUS MILLER CMD 102/250
MUTE
EQ1
GAIN
OLD SCHOOL MILLERIZER
EQ2
Off Max Off Max
ULTRALOW MID HIGH MID HIGHLOW
MASTER
0 Max
LINE OUT
LITTLE MARCUS
MARCUS MILLER 102/500 / MARCUS MILLER CMD 103
OFF
ONCLIP
MUTE
EQ1
GAIN
OLD SCHOOL MILLERIZER
EQ2
Off Max Off Max
ULTRALOW MID HIGH MID HIGHLOW
MASTER
0 Max
LINE OUT
OFF
ONCLIP
INPUT +16
MUTE
GAIN
INPUT
-16Min Max
EQ1
EQ2
ULTRALOW MID HIGH MID HIGHLOW
-16Min Max -16 +16-16 +16 -16 +16 -16 +16
-16 +16-16 +16 -16 +16 -16 +16
LITTLE MARCUS 800
MILLERIZER
OLD SCHOOL
Off Max Off Max
+16
Little
Little
Little
Marcus
Marcus
Marcus
800
800
800
0 Max
MASTER
0 Max
LINE OUT
0 Max
OFF
ONCLIP
LITTLE MARCUS REAR PANEL
SPEAKER OUT
SPEAKER OUT
1 + = SIGNAL
1 + = SIGNAL
1 = GND
1 = GND
CLASS 2 WIRING
FSW
CLASS 2 WIRING
TUNER OUTTUNER OUT RETURN EFFECT SEND EFFECT
INPUT
CAUTION:
RISK OF ELECTRIC
SHOCK DO NOT OPEN.
AVIS:
RISQUE DE CHOC
ELECTRIQUE
NE PAS OUVRIR.
-16Min Max
+16
LITTLE MARCUS 1000
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
PRE EQ
CAUTION:
FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE
REPLACE ONLY WITH SAME
TYPE AND RATING FUSE.
ATTENTION:
REMPLACER UNIQUEMENT PAR
UN FUSIBLE DE MEME TYPE.
BALANCED:
PIN1: GROUND
PIN2: SIGNAL +
PIN3: SIGNAL
LINE OUT
GND LIFTPOST EQ
-16 +16-16 +16 -16 +16 -16 +16
0 Max
05
MARCUS MILLER CMD 101 MICRO 60
1x10” + TWEETER | 60W
This is not just a practice amp, the sound quality delivered by this 60W small combo is really impressive. At Markbass we are unable to make something not sounding sound good, we always use the best components
to achieve a full, round Markbass sound! Great choice for small gigs and recording and, thanks to the balanced output, you can connect it to a mixer/PA, then using it as a small personal monitor. This compact combo
amp section also features level control, 3- band EQ, aux in, headphone out, speaker on/o switch.
TECHNICAL SPECS
PREAMP AMP: SOLID STATE
POWER AMP: ANALOG
CONTROLS: GAIN - MASTER
EQ (±16dB): LOW (40 HZ) | MID (800HZ) | HIGH (6 KHZ)
POWER: 45W RMS@8Ω/60W RMS@4Ω
OTHER FEATURES:
AUX IN
HEADPHONE OUT
XLR LINE OUT
SPEAKER ON/OFF
OUTPUT FOR EXTERNAL CAB (MINIMUM LOAD 8Ω)
SPEAKER SIZE / IMPEDANCE: 1x10” MARKBASS CUSTOM / 8Ω
SPEAKER Power Handling: 200W RMS (AES STANDARD)
FREQUENCY RESPONCE: 45HZ TO 18KHZ
CROSSOVER FREQUENCY: 3.5KHZ
VOLTAGE SELECTOR: This combo feature a 120V/240V Voltage Selector to use the amp in countries with dierent voltages, so make sure the switch on the rear panel is on the correct
voltage before connecting it to the AC power, and the fuse is the right value for that voltage (This selector is not available on the 100V version).
Please change the voltage/fuse values label located near the voltage selector matching the voltage/fuse values when you need to change the voltage of the apparatus.
WEIGHT: 25.35lbs/11,5kg
DIMENSIONS: 14.56”/37cm | 13.14”/33,4cm | 14.40”/36,6cm
FUSES: T 2A 250V for 100V setting;
T 2A 250V for 120V setting;
T 1A 250V for 230V/240V setting;
Minimum ohm load for all Markbass heads/combos is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
NOTE: Product specications are subject to change without notice.
06
MARCUS MILLER CMD 101 MICRO 60 AMP
FRONT PANEL REAR PANEL
240
120
07
Product specications are subject to change without notice
Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52 - Tel. +39 085 446 3755 - Fax +39 085 440 7764 -
www.markbass.it - info@markbass.it
Loading...