1312
GAS INFRARED HEATERS
MARK EIRE bv
Coolea Macroom
Co. CORK - IRELAND
Phone : +353 (0)26 453 34
Fax : +353 (0)26 453 83
1
USER INSTRUCTIONS
N° 05000221/4
1.
PRODUCT SPECIFICATION
2. SAFETY RECOMMENDATIONS
3. IGNITION
4. SHUT-OFF
5. MAINTENANCE
6. CHANGING THE GAS USED
GAS INFRARED HEATERS
2
1. PRODUCT SPECIFICATION :
Refer to the heater rating plate on the gas supply cover panel (see example
below).
MODEL
MARK
6
MARK
8
MARK
10
MARK
12
MARK
16
MARK
20
MARK
20-2
MARK
24
MARK
24-2
MARK
32
MARK
32-2
MARK
64-2
Certificate Number
1312
AP 230
1312
AP 230
1312
AP 231
1312
AP 231
1312
AP 232
1312
AP 232
1312
AP 233
1312
AP 232
1312
AP 233
1312
AP 232
1312
AP 233
1312
AP 249
Class NOx 4
Weight
(kg)
2,5 2,9 3,1 3,4 4,1 5,0 5,0 5,5 5,5 6,7 6,7 12,2
Net calorific value
Qn (kW) Hi
2,50 3,30 3,80 5,10 6,75 7,60 7,60 10,20 10,20 13,50 13,50 27,00
G20 consumption
(Natural gas) (m
3
/h)
0.265 0.350 0.400 0.540 0.715 0.805 0.805 1.080 1.080 1.430 1.430 2.860
G31
consumption
(Propane) (kg/h)
0.195 0.260 0.300 0.400 0.530 0.595 0.595 0.800 0.800 1.055 1.055 2.110
Combustion air G20
2.60 3.40 3.90 5.30 7.00 7.90 7.90 10.50 10.50 13.90 13.90 27.80
(m3/h) G31
2.30 3.10 3.60 4.80 6.30 7.10 7.10 9.60 9.60 12.60 12.60 25.20
Required air
renewal rate (m3/h)
25 33 38 51 67.5 76 76 102 102 135 135 270
GAS INFRARED HEATERS
3
2. SAFETY RECOMMENDATIONS :
THESE HEATERS MUST BE INSTALLED AND MAINTAINED BY A QUALIFIED INSTALLER
IN ACCORDANCE WITH THE CURRENTLY APPLICABLE SAFETY REGULATIONS AND
WITH THE INSTALLER INSTRUCTIONS.
TO AVOID ABNORMAL MECHANICAL CONSTRAINTS ON THE RADIANT, IT IS
RECOMMENDED THAT IT BE CONNECTED TO THE GAS MAINS BY A FLEXIBLE TUBE.
TO BE INSTALLED IN WELL-VENTILATED PREMISES. NOT FOR DOMESTIC USE.
2.1 HEATER INCLINATION
2.2 MINIMUM SAFETY CLEARANCES (INFLAMMABLE MATERIALS:
max
=70°C)
(*) For an minimum inclination of 20°
GAS SUPPLY
5 to 35°
5 to 35°
WRONG INCLINATION
CORRECT INCLINATION
1m
min.
2m
min.
HEATED
AREA
HEATED
AREA
1m
min.
0,6m
min.(*)
GAS INFRARED HEATERS
4
3. START-UP :
Manual operation
Open the main gas valve.
Switch the power on.
Start the heater ignition cycle.
If the flame is not lit after 45 seconds, start a second ignition cycle.
If the flame is still not lit or goes out, close the main gas valve, switch
the power off and call your installer.
Automatic control
(MT100, MT150, MTH100 or MTH150 control module)
Open the main gas valve.
Switch the power on.
Check the settings (temperature, time).
Change module programming if necessary.
4. SHUT OFF :
Close the main gas valve.
Switch the power off.
5. MAINTENANCE :
To be performed once a year by your installer, according to the
INSTALLER INSTRUCTIONS.
6. CHANGING THE GAS USED :
For any change in the type of gas used, please contact your installer.
TO BE DISPLAYED
NEXT TO THE CONTROL UNIT
GAS INFRARED HEATERS
MARK EIRE bv
Coolea Macroom
Co. CORK - IRELAND
Phone : +353 (0)26 453 34
Fax : +353 (0)26 453 83
Installer’s Stamp :
1312
USER GUIDE
N° 05000221/4
(TO BE DISPLAYED NEXT TO THE CONTROL UNIT)
M A N U A L O P E R A T I O N
IGNITION :
Open the main gas valve.
Switch the power on.
Start the heater ignition cycle.
If the flame is not lit after 45 seconds, start a second ignition cycle.
If the flame is still not lit or goes out, close the main gas valve, switch
the power off and call your installer.
SHUT-OFF :
Close the main gas valve.
Switch the power off.
MAINTENANCE:
To be performed once a year by your installer, according to the
INSTALLER INSTRUCTIONS.
.
GAS INFRARED HEATERS
MARK EIRE bv
Coolea Macroom
Co. CORK - IRELAND
Phone : +353 (0)26 453 34
Fax : +353 (0)26 453 83
Installer’s Stamp :
1312
USER GUIDE
No. 05000221/4
(TO BE DISPLAYED NEXT TO THE CONTROL UNIT)
A U T O M A T I C C O N T R O L
MT100, MT150, MTH100 or MTH150 modules
IGNITION :
Open the main gas valve.
Switch the power on.
Check the settings (temperature, time).
Change module programming if necessary.
SHUT-OFF :
Close the main gas valve.
Switch the power off.
MAINTENANCE :
To be performed once a year by your installer, according to the
INSTALLER INSTRUCTIONS.
Loading...