Marimba One One Vibe Owner's Manual

OWNER’S MANUAL

[e-mail]

www.marimbaone.com

tel [phone]

fax [phone]

Treble

TM

ASSEMBLY INSTRUCTIONS & OWNER'S MANUAL

TM

FOR ASSEMBLY,
YOU WILL NEED:

1

CAREFULLY UNPACK YOUR CRATE

Compare the seven components as shown on this page.

Bass

Harp

A large open space with carpet (or a blanket to cover the oor)

•

An assistant to help you assemble the One Vibe™

•

Center Support

Natural Resonators

Accidental Resonators

Accidental Bars

Natural Bars

Pedal

021717 - REV. A PAGE 1 0F 9

KEEP These instructions for future reference

2

UNFOLD LEGS

Position yourself with the bass end on
your left and treble end on your right,
with legs facing you.

Pull legs toward you.

CENTER SUPPORT

Bass

Treble

3

4

IDENTIFY BASS END OF CENTER SUPPORT

Align bass end of center support with bass end of harp.

Bass

UNFOLD ARMS

Unfold arms by
swinging them over
to the opposite side.

5

021717 - REV. A PAGE 2 0F 9

POSITION CENTER SUPPORT

Insert center support through legs of both headboards.

Bass

Treble

6 7 8

ATTACH BASS END TIGHTEN KNOB REPEAT FOR TREBLE END

Slide notch onto bolt.

Treble

9

Rotate arm and slide notch onto bolt.

PEDAL

ATTACH ARMS

10 11

TIGHTEN
KNOB

REPEAT FOR
OTHER ARM

12 13

021717 - REV. A PAGE 3 0F 9

REMOVE PARTS INSERT PEDAL BOLT

Remove knob, threaded
wheel, metal washer, and
one black plastic washer.

Retain

Slide bolt through center hole on center support.