Marimba One Izzy Owner's Manual
™
Marimba One Izzy
OWNER’S MANUAL
combination wood and aluminum rails
www.marimbaone.com
tel 707 822 9570
fax 707 822 6256
901 O St, Suite D
Arcata, CA 95521
USA
ASSEMBLY INSTRUCTIONS
& OWNER'S MANUAL
FOR ASSEMBLY,
YOU WILL NEED:
CAREFULLY UNPACK YOUR CRATE
1 �
Compare the components to this page.
Bass End
A large open space with carpet (or a blanket to cover the oor)
•
An assistant to help assemble the heavy items
•
Sway Block
Treble End
Girder
Joiner-Tube
Girder
Natural Resonator Bank
Rail #1
Rail #2
Natural Bars Accidental Bars
051214 - REV. A PAGE 1 0F 11
Accidental Resonator Bank
Rail #3
Rail #4
KEEP These instructions for future reference
2 �
ARRANGE FRAME COMPONENTS
In a large open space with carpeting (or a blanket), arrange the frame components.
Treble End
Girders
Bass End
Joiner-Tube
3 �
girder
knob
4 �
SEAT GIRDER ENDS ONTO HOOKS
Have your assistant hold the bass end-frame
upright while you hold the girder.
You may need to fully loosen the girder knobs.
Seat the girder end onto
the frame hook.
You may need to push
lightly on the nut to
seat the girder end.
nut
bolt thread
SECURE GIRDERS TO HOOKS
girder end
girder knob
frame hook
girder end
girder knob
frame hook
Completely tighten the knob.
5 �
051214 - REV. A PAGE 2 0F 11
REPEAT STEPS FOR TREBLE END OF FRAME
6 �
LOOSEN JOINER-TUBE LEVERS
Flip levers to the open position.
7 �
8 �
CONNECT GIRDERS
SECURE GIRDERS
Slide the joiner-tube over the girder tubes until the
joiner-tube can go no further.
girder tube
girder tube
You should be able to hear (or feel) when the
two girder tubes touch inside the joiner-tube.
Secure the joiner-tube by
pushing levers closed.
9 � 10 �
IDENTIFY RAIL #2 UNFOLD RAIL
The rails are numbered on the hinge end.
When the rails are folded, the number
appears in the end-grain of the wood.
2T
2T
2B
2B
051214 - REV. A PAGE 3 0F 11
With your assistant, unfold the rail while
supporting each end.
NOTE: Gaps between the rail jacks
are larger on the bass end of rail.
bass
treble
rail jacks
Loading...