Marelli S64J3, TS003 User Manual

USER OPERATION INSTRUCTION (DRAFT)

KEY FREE SYSTEM

The key free uses coded radio signals to communicate with the vehicle.

When the key free is near the vehicle such as in your pocket or purse.

It allows the vehicle to be locked unlocked, or started without inserting the ignition

Key. It is also possible to use the control entry function.

△ CAUTION

・

Be sure to carry the key free with you.

・ Do not leave the vehicle with the key free inside.

・

The key free may not function correctly depending on the environment or operating

conditions, if you do not use it correctly.

・The key free transmits faint radio waves.

・ When there are strong signals coming from a television tower, power station or

a cellular phone with you.

・

When the key free is in contact with or covered by a metallic material.

・ When radio wave-type remote control entry is used nearby.

・ When the key free is placed near an electric appliance such as a personal

Computer.

・ The key free continually consumes battery power as the key receives a signal to

communicate with the vehicles.

・ Battery life is about 2 years, although it varies depending on the operating

conditions. When the battery of the key free is low，

If the battery runs down, replace it with a new one.

・ If the key free receive strong signal over an extended period of time the

Battery could quickly run down. Do not place the key free near an electric

appliance such as a television set or personal computer.

1. KEY FREE OPERATION

You can lock or unlock the doors without taking the key out from your pocket or

purse. When you carry the key free with you. You can lock or unlock all door by

pushing the door handle request switch or back door handle request switch within

the range of operation.

2. Locking doors

1. Turn the ignition knob to the LOCK position and remove the ignition key if any

metal key is in the ignition knob.

2. Close all the doors.

3. Push any front door or the back door handle request switch while carrying the

key free with you

4. All the door and back door will lock.

3.Unlocking doors

1. Push the door handle request switch once Drivers side:

・

The driver door unlock Front passenger side or back door.

・

Only corresponding door unlocks.

4.OPERATING THE ENGINE

Ignition knob positions

Push in the ignition knob in the range when you turn it.

LOCK(Normal parking position)

The ignition knob can only be locked in the position.

The ignition knob will be unlocked when it is pushed in , and turned to the ACC

position while carrying the key free .

ACC(Accessories)

This position activates electrical accessories such as the radio, when the engine is

not running.

ON(Normal operating position)

This position turns on the ignition system and electrical accessories.

START

This position starts the engine. As soon as the engine has started, release the knob

immediately. It will automatically return to the ON position.

Starting the engine

When driving the vehicle, be sure to carry the intelligent key with you.