Marelli S57L0 User Manual
User’s Manual
BCM2 for Passive Keyless
Model No.: S57L0
There is no User’s Manual because this equipment will not be sold to enduser directly.
USER OPERATION INSTRUCTION (DRAFT)
KEYLESS START SYSTEM
This system uses coded radio signals to communicate with the vehicle and remote
controller when the remote controller is near the vehicle such as in your pocket or purse.
It allows the vehicle’s door lock/unlock, and start the engine without inserting the
ignition Key. It is possible to use the control entry function.
△ CAUTION
● Be sure to carry the remote controller.
● Don’t leave the vehicle when the remote controller is in it.
● This system may not perform correctly depend on the environment or operation
conditions, if you do not use it correctly.
・ The remote controller transmits the faint radio waves.
・ When there are strong signals coming from the television tower, the power station
or the cellular phone.
・ When the remote controller is in contact with a metallic material or covered by it.
・ When another radio wave-type remote controller is used nearby.
・ When the remote controller is placed near an electric appliance such as a personal
computer.
● The remote controller continually consumes battery power when it receives a
signal to communicate with the vehicles.
● Battery life is about 2 years, although it varies depending on operation conditions.
Please replace the new one if the battery runs down or power is low.
● Battery life may quickly run down if the remote controller received strong signal
long time. Don’t place the remote controller near an electric appliance such as a
television or personal computer.
1. KEYLESS START SYSTEM OPERATION
You can lock or unlock the doors without taking the remote controller out from your
pocket or purse when you carry the remote controller. You can lock or unlock all
doors by pushing the door handle request switch or the back door handle request
switch within the realm of operation.
2. Locking doors
1. Stop the engine and get out of your vehicle with your remote controller.
2. Close all the doors.
3. Push the door handle request switch or the back door handle request switch.
4. All doors will lock.
3.Unlocking doors
1. Push the door handle request switch.
・The driver door unlock Front passenger side or back door.
・Only corresponding door unlocks.
4.OPERATING THE ENGINE
・ LOCK（Normal parking position)
This position activates only lock/unlock the door functions.
・ ACC(Accessories)
This position activates electrical accessories such as the radio, when the engine is
not running.
・ ON(Normal operating position)
This position turns on the ignition system and electrical accessories.
・ START
This position is starts the engine.
Starting the engine
When driving the vehicle, be sure to carry the remote controller.
1. The shift knob located in the Parking position.
2. Securely depress the brake pedal.
3. Securely push the push engine start switch and the engine will be started.
△ WARNING
Do not start the engine from outside the vehicle through the window. Doing so could
lead an accident and injury. Be sure to sit in the driver seat to use the remote
controller.
Loading...