MARCY CB-729 User guide

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

CB-729 OLYMPIC WIDTH

WEIGHT BENCH

Model

CB-729

Retain This

Manual for

Reference

170712

OWNER'S
MANUAL

PURE-TEC LIMITED

www.puretecfitness.com

Email: [e-mail]

www.puretecfitness.com

TABLE O F CONTENTS

BEFORE YOU BEGIN...................................................................................…. 1

IMPORTANT SAFETY NOTICES..................................................................…. 2

HARDWARE PACK…….....…....................................................................…… 4

ASSEMBLY INSTRUCTIONS........................................................................… 5

EXPLODED DIAGRAM……………………………………………………………… 9

PARTS LIST...............................................................................................…… 10

WARRANTY.................................................................................................…. 11

ORDERING PARTS.......................................................................................… 11

BEFORE YOU BEGIN

Thank you for selecting the MARCY CB-729 Olympic Weight Bench. For
your safety and benefit, please read this manual carefully before using
the machine. As the official representative for Marcy, we are committed
to providing complete customer satisfaction. If you have any questions,
or find there are missing or damaged parts, we guarantee you complete
satisfaction through direct assistance from our factory. To avoid
unnecessary delays, please contact our Customer Solutions Department,
Monday – Friday 9am – 5pm. GMT

Pure-Tec Limited

Tel: [phone]

Email: [e-mail]

Monday - Friday 0900 – 1700 GMT

www.puretecfitness.com

1

www.puretecfitness.com

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercis e machine is built for optimum safety. However, c er tain
precautions apply whenever you operate a piece of exercise equipment. B e
sure to read the entire manual before you assemble or operate your machine.
In particular, note the follo w ing safety precautions:

1. Keep children an d pets away from the machine at all times. DO NOT leave
children unat tended in the sam e r oom with the machine.

2. Only one person at a t ime should use t he m ac hine.

3. If the us er ex per iences dizzines s , nausea, c hes t pain, or any other
abnormal sy mptoms, STOP the workout at onc e. CONSULT A
PHYSICIAN IMMEDIATELY.

4. Position the mac hine on a clear, leveled surfac e. DO NOT use the
machine near water or outdoors .

5. Keep hands and feet away from al l moving parts.

6. Always wear appr opriate work out c lothing when exercising. DO NOT wear
robes or other c lothing that could become ca ught in the machi ne. Running
or aerobic sho es ar e also required w hen using the machine.

7. Use the machine only for its intended use as described in this manual. DO
NOT use attac hm ents not recomme nded by the manufacturer.

8. Do not place any shar p object around the machine.

9. Disabled person should not use the machine without a qualified person or
physician in att endance.

10. Before usi ng t he machine to ex er cise, always do stretching exercises t o
properly war m up.

11. Never operat e the machine if the machine is not functioning pr operly.

12. A spotter is r ec ommended durin g ex er c is e.

CARE AND MAINTENANCE

1. Inspect and ti ght en all parts before using the machine.

2. The machine c an be cleaned using a damp cloth and mild non-abras ive detergent.
DO NOT use solvent s .

3. Maximum weight on Crutch: 135 kgs.

4. Maximum user weight: 135 kgs.

5. Maximum weight on Leg Developer: 45 kgs.

WARNING: BEFO RE BEGINNING ANY EXERCISE PRO GRAM, CONSULT
YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS
OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH
PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS
EQUIPMENT. PURE-TEC LIMITED ASSUMES NO RESPONSIBILITY FOR
PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR
THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.

2

www.puretecfitness.com

WARNING LABE L REP LA CEMENT

The Warning Label shown here has been placed on the Cross Brace. If the label is missing or
illegible, please contact Customer Solutions, at [e-mail] for a replacement.
Apply the label in location shown.

3

www.puretecfitness.com

HARDWARE PACK

NOTE: T he f ollow ing parts a re not drawn t o s c a le . Please us e y our own ruler or scale to me a sur e t he s ize .

4

www.puretecfitness.com

ASSEMBLY INS T RUCTION

Tools Required for Assembling this Machine: Two Adjustable Wrenches and Allen
Wrenches. NO TE: It is strongly recommended that two or more p eople assemble this
machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Connect the two Upright B eams (#1) by a Cross Brace (#3) in the M id-s pan. Secure

each end of the Cros s Br ac e with two M10 x 3 1/ 8” Car r iage Bolts ( #25) , one Brack et
(#10), two ∅ ¾ ” Was her s ( #35) , and two M10 Aircraf t Nuts (#32).

C.) Insert two Crutches ( #2) into the two Upright Beams. Sec ur e each Crutch w ith a Lock

Knob (#12) at selec ted height.

DIAGRAM 1

5

www.puretecfitness.com

STEP 2 (See Diagram 2)

A.) Attach the Main S eat Support (#4) to the Front Pos t (#5). Secure it with three M10 x

5/8” Allen Bolt s ( #40) and three Ø ¾” Washers (#35).

B.) Attach the Main S eat Support to the Cross Brac e ( #3) . Secure it wit h two M10 x 2

5/8” Carriage Bolts (#26), one B r ac ket (#10), t wo Ø ¾” Washers (#35) , and two
M10 Aircraft Nuts (#32).

C.) Attach the Diagonal Supp ort (#6) to the Main S eat Support an d Front Post. S ec ur e

each end with one M8 x ¾” Allen Bolt ( #28) and one Ø 5/8” Washers (#37).

D.) Securely tighten all Nuts and Bolts installed in Step-1 and Step-2.

DIAGRAM 2

6

www.puretecfitness.com

STEP 3 (See Diagram 3)

A.) Attach the Leg Developer (#7) to the open brack et on the Front Post (#5). Sec ur e it

with one M8 x 3” Allen B olt (#30), two Ø 5/8” Washers ( #37) , and one M8 Air c r af t
Nut (#33).

B.) Attach the pivot on Backr es t Support (#8) to the open bracket on Main Seat Suppor t

(#4). Secure it with one M12 x 3 ½” Allen Bolt (#39), two Ø 1” Washer s ( #36), and
one M12 Aircraf t Nut (#34).

C.) Attach the pivot on Incli ne Support (#9) to the open bracket on B ac krest Support.

Secure it with o ne M10 x 2 3/8” Allen B olt (#31), two Ø ¾” Washers (#35) , and one
M10 Aircraft Nut (#32). Attach the other end of Incline Sup por t onto the selected
slot on Main Seat S upport to obtain t he desired Backrest inclin e.

D.) Note: Do not over tighten the Nut and Bolt to the pivot. The Backrest Support

and Incline Support need to be able to move smoothly.

DIAGRAM 3

7

www.puretecfitness.com

STEP 4 (See Diagram 4)

A.) Attach the Bac krest Board (#14) to the Backrest Support ( #8) . Secure it with t wo M8 x

1 ¾” Allen Bolts (#29) and two Ø 5/ 8” Washers (#37).

B.) Attach the Seat P ad ( #13) to Main Seat Support (#4). Sec ure it with four M 6 x 1 ¼”

Hex Bolts (#27) a nd four Ø ½” W as her s ( #38) .

C.) Insert two Foam Tubes (#11) halfway t hr ough t he holes on the Le g Developer ( #7) .

Push four Foa m Ro lls ( #17) onto the Tubes from each end. P lug four Foam Roll End
Caps (#19) to each E nd.

D.) Slide an Olympic Sleev e ( #41) onto the weight pos t on Leg Develop er . Attach a

Spring Clip (#24) onto Olympic S leeve.

DIAGRAM 4

8

www.puretecfitness.com

9

www.puretecfitness.com

PARTS LIST

KEY NO. DESCRIPTION QUANTITY

1 Upright Bea m 2
2 Crutch 2
3 Cross Brace 1
4 Main Seat Support 1
5 Front Post 1
6 Diagonal Sup por t 1
7 Leg Developer 1
8 Backrest S uppor t 1
9 Incline Supp or t 1
10 Bracket 3
11 Foam Tube 2
12 Lock Knob 2
13 Seat Pad 1
14 Backrest Board 1
15 Ø 2” End Cap 3
16 2 3/8” x Ø 2” Crut c h Sl eeve 2
17 Foam Roll 4
18 Ø 5/8” x ½” Bus hing 2
19 Foam Roll End Cap 4
20 Ø 1” E nd Cap 1
21 Ø ¾ ” End Cap 2
22 Backrest S uppor t Bushing 2
23 2 3/8” x 1 1/8” End Cap 1
24 Spring Clip 1
25 M10 x 3 1/8” Carria ge B olt 4
26 M10 x 2 5/8” Carria ge B olt 2
27 M6 x 1 ¼” Hex Bolt 4
28 M8 x ¾” Allen Bolt 2
29 M8 x 1 ¾” Allen Bolt 2
30 M8 x 3” Allen Bolt 1
31 M10 x 2 3/8” Allen B olt 1
32 M10 Aircraft Nut 7
33 M8 Aircraft Nut 1
34 M12 Aircraft Nut 1
35 Ø ¾” Washer 11
36 Ø 1” Washer 2
37 Ø 5/8” Washer 6
38 Ø ½” Washer 4
39 M12 x 3 ½” Allen Bolt 1
40 M10 x 5/8” Allen B olt 3
41 Olympic Sleeve 1

10

www.puretecfitness.com

PURE-TEC LIMITED

LIMITED WARRANTY

Pure-Tec. warrants this product to be free from defects in workmanship and material,
under normal use and service conditions. Please refer to www.puretecfitness.com
for warrant y cond iti ons. This warranty extends only to the original purchaser and is
valid for home use only. Pure-Tec’s obligation under this Warranty is li mited to
replacing damaged or faulty parts at Pure-Tec’s option.

All returns must be pre-authorised by Pure-Tec. This warranty does not extend

to any product or damage to a product caused by or attributable to freight
damage, abuse, misuse, improper or abnormal usage, purchasers own repairs
or for products used for commercial or rental purposes. No other warranty

beyond that specifically set forth above is authorised by Pure-Tec.
Pure-Tec is not responsible or liable for indirect, special or consequential damages

arising out of or in connection with the use or performance of the product or other
damages with respect to any economic loss, loss of property, loss of revenues or
profits, loss of enjoyments or use, costs of removal, installation or other consequential
damages or whatsoever natures.

The warranty extended hereunder is in lieu of any and all other warranties and any
implied warranties of merchantability or fitness for a particular purpose is limited in
its scope and duration to the terms set forth herein.

Your statutory rights are not affected.

ORDERING REPLACEMENT P ARTS

Replacement parts can be ordered by contacting our Customer Solutions
Department,

www.puretecfitness.com

Email: [e-mail]

When ordering replacement parts, please give the following information,

1. Model

2. Description of Parts

3. Part Number

4. Date of Purchase

11

www.puretecfitness.com