Marathon Special Products M6J200Ax101 Data Sheet

Product Data Sheet

Class J Fuse Holder

M6J200Ax101

Replace “x” with 1 or 3 for number of poles

Wire Range

• Line/Load: 250 kcmil - #6 AWG CU

Electrical Ratings

• 110 - 200A Max

- Amperage rating based on maximum fuse rating for that physical size

• 600 Volts AC

• Approved for 200,000 Amp Withstand Rating

Agency Compliance

• UL Listed, Fuse holder standards UL 4248-1 and UL 4248-8

• UL File No. IZLT.E35113

• UL Feeder Circuit Compliant PerUL508A

• CSA File No. LR21455

• RoHS Compliant

Material Information

• Insulator base:

- High Impact Thermoplastic

- Flammability rating of insulator base UL94 V-0

- Insulator base maximum temperature rating: 125°C (UL RTI)

- Use outside these ratings needs to be judged in the end-use application

• Connector: Aluminum, tin plated

• Terminal set screws: Aluminum, tin plated

• 5/16” Belleville Washer: Steel, zinc plated

• Bolt: Steel, nickel plated

• Connector mounting screws: Steel, zinc plated

1

Product Data Sheet

Termination Specications

Line and Load

Side

(CU Stranded)

250 kcmil - #1 275 in·lbs 1 B, C

• Wire Strip length - 15/16”

• Hex key needed - 5/16”

Wire Size

Torque Wires/ Terminal Wire Class (UL)

#2 - #6 120 in·lbs 1 B,C

Installation & Accessories

• Mounting (Panel):

- For use with 1/4” (M6) fastener,

- Mounting torque to be determined in end use
application. Not to exceed 25 lbf-in (2.8 N-M)

• Fuse Installation:

- Fuses are to be mounted with the hardware supplied.

- Fuse mounting torque not to exceed 70 lbf-in (7.9 N-M)

• Cover:

- Snap on cover with translucent material

- Catalog number: CJ6200M

2 REV-A 08/08/20