Marathon Special Products FPB23574 Data Sheet

5
G
0
0
0
0
0
0
0
0

Product Data Sheet

FPB23574
Listed Studded Power Block 175 Amps, 600 Volts (AC/DC)
Wire Range:
Line side: (1) 2/0 - #14 AWG Load Side: 1/4 - 20 Stud
Electrical Ratings:
175A copper wire, 135A aluminum wire (Based on NEC Table 310-16, 75°C columns)
600 Volts AC/DC (Service Equipment according to National Electrical Code, NFPA 70)
Minimum enclosure size: 16 X 12 X 6
Factory and Field Wiring
NOTE: Use outside these ratings must be judged in end-use application
Short Circuit Current Ratings (Copper wire only):
S ui table Conductors Overc urrent Prot ec tion F use R equi red
Class /Max Amp Rating(kcmil/AWG)
Line Load J T RK1 RK
2/0 - 6 2/0 - 6 200 20
8 - 10 8 - 1
100 10
200 10 100 30 60 3
60 3
CC
Overcurrent Protection Circuit Breaker Required
Line Load SYM Amps Max
2/0 -2 2/0 -2 65,000 480Square D 250JLL36250
Mfr Type Max Amp
Mechanical Ratings:
Insulator base temperature: -40°C/F to 125°C (257°F) UL RTI
Maximum insulator base plate temperature: 130°C (266°F) UL RTI
Flammability rating of insulator base: UL 94 V-0
SCCR, RMS Volts
SY M Amps Max
100,000 60 100,000 60
SCCR, RMS Volts
Materials:
s
5
5
Connector: High conductivity aluminum, tin plated
Insulator base: Glass filled polycarbonate (thermoplastic)
Insulator base plate: Phenolic laminate
Terminal set screws: Aluminum, tin plated
Mounting screws: Steel, zinc plated
Nuts: Steel, zinc plated
Stud: Brass, tin plated Agency Approvals:
UL Listed, File No. QPQS.E309401
Investigated to UL 1953
UL 508A Feeder Circuit Terminal Spacing for up to 600 Volts
CSA Certified, CSA C22.2 No. 158, File No LR 19766
600V Rating for Class 6228 01 – Use Groups A, B, C
CE compliant to IEC 60947-7-1
RoHS Compliant
Wire Ranges:
Line Side Wire Range:
Copper Wire Stranding Classes - Number of Conduct ors
Wire Size Torque Solid Class B Class C
N.m in. lb
2/0 AWG 13.6 120 1 1
1/0 13.6 120 1 1
113.6120 1 1
213.6120 1 1
413.6120 1 1
613.6120 1 1
84.540 1 1 10 4.0 3 12 4.0 3 14 4.0 35 1 1 1
11 1 11 1

Aluminum stranded wire range: 2/0 – 14 AWG

Load Side Wire Range:
1/4 - 20 Threaded Stud: torque to 61 in. lbs.

Wire strip length, line and load side taps – 11/16”

Hex key needed: 5/16” Mounting:
Panel mountable: #10 (5 mm) fastener, torque to 25-30 in. lbs.
Accessories:
Marker Strips to mark circuits. Printing available. Consult factory.
Loading...
+ 1 hidden pages