Marathon Special Products 15xx TP Data Sheet
Product Data Sheet
A Regal Brand
75 Amps 600 Volts AC/DC
Wire Range
• #10 AWG - #18 AWG Solid Cu wire (unprepared wire, 30 Amps max)
• Prepared wire size limited to maximum lug width of 0.50” (see below for lug sizing)
Electrical Ratings
• 75 Amps
• Voltage:
• 600V per UL 1059 Class C & CSA22.2 No.158, Class B & C requirements
• SCCR Rating of 10,000 kA with no over-current protection (default for terminal blocks)
• Factory & Field Wiring
• Test point designed to accept meter leads with 4 MM spring tip banana plug
15xx TP
Replace xx with 04, 06, 08, 12 for number of poles
Terminal Block with Test Points
Agency Compliance
• UR - UL Recognized Terminal Block, Evaluated to UL 1059, File No.XCFR2.E62806
• CSA - Evaluated to CSA 22.2 No.158, File No. LR19766
Material Information
• Insulator base:
• General Phenolic
• Flammability rating of insulator base UL94V0
• Insulator base temperature rating: -40°C to 150°C (UL RTI)
• Connectors - brass, nickel plated
• Terminal screws - brass, nickel plated
• Test points - brass, nickel plated
• Marking strip - vinyl (white)
• Thumb screws - brass, nickel plated
• RoHS Compliant
1
Termination Specications
Unprepared Wire
Wire Size
Cu
#10 AWG - 18 AWG 2.3 N·m (20 lbf·in) 1 Solid
Torque
Wires /
Terminal
Wire Class (UL)
Prepared Wire
Lug Width Torque
Terminal dimensions
below
2.3 N·m (20 lbf·in) per lug recommendation per lug recommendation
Wires /
Terminal
Wire Class (UL)
Total lug stack up: not to exceed 1/8”
Installation & Accessories
• Mounting(Panel):
• For use with #10 fastener with at washer (max diameter 3/8”).
• Torque mounting fastener: not to exceed 25 lbf·in (2.8 N·m).
• Covers
• Catalog Number: CC 15xx TP (replace “xx” with line length - 04, 06, 08, 12 only)
• Cover material - clear polycarbonate
• Accessory cover is not intended to provide insulation for electrical spacings.
2 PDS 0492 REV-C 06/24/16
Loading...