Marathon Electric Y283 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 143THTR15535

Catalog No: Y283

1 HP Variable Speed Motor, 3 phase, 1800 RPM, 230/460 V, 143TC Frame, TENV

1000:1 with Encoder Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 143THTR15535, Catalog No:Y283 1 HP Variable Speed Motor, 3 phase, 1800 RPM, 230/460 V, 143TC Frame, TENV

Nameplate Specifications

Output HP 1 Hp Output KW 0.75 kW Frequency 60 Hz Voltage 230/460 V Current 3.0/1.5 A Speed 1750 rpm Service Factor 1 Phase 3 Efficiency 84 % Power Factor 75 Duty Continuous Insulation Class H Design Code INV KVA Code P Frame 143TC Enclosure Totally Enclosed Non Ventilated Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6205 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE Y IP Code 43

Technical Specifications

Electrical Type Squirrel Cage Inverter Duty Starting Method Inverter Only Poles 4 Rotation Reversible Resistance Main 13.5 Ohms Mounting Bolt-on Base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type T Overall Length 15.04 in Frame Length 8.56 in Shaft Diameter 0.875 in Shaft Extension 2.12 in Assembly/Box Mounting F1 ONLY Outline Drawing 107391-856 Connection Drawing EE7308

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:18/06/2020

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

107391

RAD

06-23-2008

RAD

06-23-2008

C M. CHATLAPALLI 01/09/2019

ECO-0159683 J DAS 01/09/2019

OUTLINE CONVERSION PROJECT

OUTLINE

104059,107388

140T FR. - BB - TENV - DBL C'FACE -3Ø

NOTE :

1. CONDUIT BOX CAN BE ROTATED IN 180°

2. REMOVABLE BASE

3. NAMEPLATE TO BE READ FROM CONDUIT BOX SIDE OF THE MOTO R

4. C-FACE MOUNTING PATTERN TYPICALLY BOTH ENDS

DASH C AG BS

706 13.54[343.91] 9.11[239.31] 3.43[87.12] 756 14.04[356.61] 9.61[244.09] 3.93[99.82] 806 14.54[369.41] 10.11[256.79] 4.43[112.52] 856 15.04[382.01] 10.61[269.49] 4.93[124.96] 906 15.54[394.71] 11.11[282.18] 5.43[137.92] 956 16.04[407.41] 11.61[294.89] 5.93[150.62]

(C)

6.50

165.10

2.12

53.96

.16 .10

3.94

2.41

4.500

4.497

114.287

114.211

3.14

79.76

2.31

58.67

(AG)

.8750 .8745

22.2237

22.2110

4.00

101.60

(143T)

5.00

127.00

(145T)

2.75

69.84

.13

3.19

.16 .10

3.94

2.41

TERM. END

HEYCO CONNECTOR

SLINGER

.19[4.82]SQX

1.38[35.05]KEY

0.004 A

3.50

3.44

88.97

87.45

6.72

170.76

6.50

165.10

45°

1.58

40.13

1.22

30.99

1.81

45.97

8.63

219.14

5.38

136.59

4.48

113.71

6.50

165.10

.12

3.04

2.75

69.85

5.50

139.70

5.890

5.860

149.597

148.835

3/8-16 UNC-2B .56[14.22] MIN.F ULL THD 4 HOLES

Ø.18[4.57] WEEP HOLE

2-Ø1.09[27.68] KNOCKOUTS

3-Ø.88[22.35] KNOCKOUTS

Ø .34[8.63]- .35[8.89] 6 HOLES

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

107391

RAD

06-23-2008

RAD

06-23-2008

C M. CHATLAPALLI 01/09/2019

ECO-0159683 J DAS 01/09/2019

OUTLINE CONVERSION PROJECT

OUTLINE

104059,107388

140T FR. - BB - TENV - DBL C'FACE -3Ø

NOTE :

1. CONDUIT BOX CAN BE ROTATED IN 180°

2. REMOVABLE BASE

3. NAMEPLATE TO BE READ FROM CONDUIT BOX SIDE OF THE MOTO R

4. C-FACE MOUNTING PATTERN TYPICALLY BOTH ENDS

DASH C AG BS

Uncontrolled Copy

3 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 7

+ 4 hidden pages