Marathon Electric X027 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 048A11T2021

Catalog No: X027

0.25 HP General Purpose Farm Duty Motor, 1 phase, 1200 RPM, 115/230 V, 48Y Frame, TEAO Single Phase Farm Duty Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 048A11T2021, Catalog No:X027 0.25 HP General Purpose Farm Duty Motor, 1 phase, 1200 RPM, 115/230 V, 48Y Frame, TEAO

Nameplate Specifications

Output HP 0.25 Hp Output KW 0.19 kW Frequency 60 Hz Voltage 115/230 V Current 3.2/1.6 A Speed 1075 rpm Service Factor 1 Phase 1 Efficiency 59.5 % Power Factor 91 Duty Continuous Insulation Class B Design Code NO DESIGN CODE KVA Code D Frame 48Y Enclosure Totally Enclosed Air Over Thermal Protection Automatic Lock Rotor Only Ambient Temperature 40 °C Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE N IP Code 43

Technical Specifications

Electrical Type Permanent Split Capacitor Starting Method Across The Line Poles 6 Rotation Selective Counterclockwise Resistance Main 0 Ohms Mounting Round - Extended Studs Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type Single Special Extension Overall Length 10.09 in Frame Length 5.50 in Shaft Diameter 0.500 in Shaft Extension 2.56 in Assembly/Box Mounting F1 ONLY Connection Drawing A-EE9057AH Outline Drawing A-SS404353-550

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:04/01/2021

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

SS404353

M. CHATLAPALLI

01/10/2019

S. MACHARLA

1/10/2019

B M. CHATLAPALLI 01/10/2019

ECO-0159684 S. MACHARLA 01/10/2019

OUTLINE CONVERSION PROJECT

OUTLINE

SS75967LN

NOTES:-

1) TOTALLY ENCLOSED MOTOR.

2) FULLY GASKETED.

3) NAMEPLATE LOC.@ 'A' TO BE READ F R O M TERM END.

TERM. END

DASH XB C

550 5.69[144.52] 10.09[256.28] 625 6.44[163.57] 10.84[275.33]

2.25

57.15

FULL FLATS(2)

2.50

63.50

2.58

65.49

1.63

41.40

.5000 .4995

12.6987

12.6860

.453 .447

11.494

11.341

(TYP)

5.29

134.37

.34

8.64

2.50

63.47

2.75

69.85

1.08

27.45

.94

1.12

23.83

28.40

1.41

35.81

10-32 UN

0.50[12.70]NPS L. HOLE

(PLUGGED)

SLINGER

GROUND LEAD TOT. ENCL.

EACH END

45°

5.61

142.49

2.24

56.90

3.04

2.96

77.22

75.18

5.08

129.03

5.62

142.75

R2.56

65.09

4.25

107.95

.34

8.74

R.17

4.32

.69

17.48

.08

1.93

8.05

204.47

2.13

53.98