Marathon Electric U760-P Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 145TTDR16349

Catalog No: U760-P

2 HP General Purpose Motor, 3 phase, 1800 RPM, 230/460 V, 145T Frame, ODP

Three Phase ODP Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 145TTDR16349, Catalog No:U760-P 2 HP General Purpose Motor, 3 phase, 1800 RPM, 230/460 V, 145T Frame, ODP

Nameplate Specifications

Output HP 2 Hp Output KW 1.5 kW Frequency 60 Hz Voltage 230/460 V Current 6.0/3.0 A Speed 1750 rpm Service Factor 1.15 Phase 3 Efficiency 86.5 % Power Factor 74.5 Duty Continuous Insulation Class F Design Code B KVA Code N Frame 145T Enclosure Drip Proof Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6205 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE Y IP Code 22

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter Poles 4 Rotation Reversible Resistance Main 6.4 Ohms Mounting Rigid Base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type T Overall Length 13.49 in Frame Length 9.56 in Shaft Diameter 0.875 in Shaft Extension 2.28 in Assembly/Box Mounting F1 ONLY Connection Drawing A-EE7308 Outline Drawing 108666-956

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:18/06/2020

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 0.5 .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

125 3.2

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

108666

A SUPPANNAVAR

02/26/2018

PST

05/18/2018

ECO-0136108

OUTLINE CONVERSION PROJECT

OUTLINE

108065

140T FRAME & 56HZ-DR.PR.

NOTE:-

1) CONDUIT BOX CAN ROTATED 180 STEP.

2) NAMEPLATE READ FROM CONDUIT BOX SIDE.

DASH "C" "BS"

956 13.49 [342.65] 6.38 [162.05]

.30

7.49

2.25

57.12

1.00

25.40

.50

12.70

2.75

69.82

3.00

76.20

4.00

101.60

5.00

127.00

5.00

127.00

6.50

165.10

2.25

57.15

2.28

57.89

.8750 .8745

22.2237

22.2110

3.14

79.76

"BS"

"C"

GROUND RING

W/ WARDWARE.

.19 [4.83] SQ X 1.38 [35.05] KEY.

1.81

45.97 .82

20.83

5.31

134.85

4.44

112.78

6.49

164.74

8.55

217.22

3.50

3.44

88.98

87.45

6.72

170.59

6.50

165.10

2.75

69.85

5.50

139.70

.88

22.35

.44

11.18 .18

4.45

.12

3.04

(6) Ø.34 [8.64] - .35 [8. 89]

(140T MTG)

(2) Ø1.09 [27.69]

KNOCKOUTS.

(3) Ø.88 [22.35]