Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
200 5.1
INCH mm
mm SHOWN IN [BRACKETS]
12
43
A
B
2
43
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
108763
R. ISLAVATH
10-10-2018
JD
11-16-2018
A
ECO-0156724
OUTLINE CONVERSION PROJECT
OUTLINE
105937
140 FR. - EXP.PR. - (629 NEW DESIGN)
NOTE:
1. BOX CAN ONLY BE RO TATED CLOCKWI SE U P
TO 270 FROM ITS ORIGINAL POSITION.
2. READ NAMEPLATES FROM C'BOX SI D E O F MOTOR
DASH FR. C B BS 2F 2FF 2FFF
750 143/5 14.75[374.56] 7.25[184.15] 5.53[140.34] 4.00[101.60] 5.00[127.00] 6.25[158.75]
C
2.25
57.15
2.33
59.09
.8750
.8745
22.2237
22.2110
B
2FFF
2FF
2F
2FF
2F
2.25
57.26
BS
3.52
89.41
019[4.82]SQ X 1.38[35.05]
KEY
7.12
180.85
5.50
139.70
2.75
69.85
1.56
39.74
.46
11.72
7.41
188.33
3.50
3.44
89.01
87.49
3.19
81.09
8.09
205.37
12.07
306.65
5.92
150.24
8.03
203.90
1-11 1/2 NPT
LEAD HOLES
.34[8.63]-.39[9.90]
12 HOLES
Regal Beloit America, Inc.
TM
COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.
PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF
REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY
INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT
AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL
BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN
RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.
TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.
INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:
200 5.1
INCH mm
mm SHOWN IN [BRACKETS]
12
43
A
B
2
43
1
A
B
ECO DESCRIPTION
DATEAPPROVED BY
DATEREVISION BY
ECO
DRAWING REVISION
REFERENCE
MATERIAL
SHEET
DRAWING NUMBERSIZE
DESCRIPTION
THIRD ANGLE
PROJECTION
DRAWN BY
DATE
DATE
APPROVED BY
PROCESS/FINISH
B
1 OF 1
108763
R. ISLAVATH
10-10-2018
JD
11-16-2018
A
ECO-0156724
OUTLINE CONVERSION PROJECT
OUTLINE
105937
140 FR. - EXP.PR. - (629 NEW DESIGN)
NOTE:
1. BOX CAN ONLY BE RO TATED CLOCKWI SE U P
TO 270 FROM ITS ORIGINAL POSITION.
2. READ NAMEPLATES FROM C'BOX SI D E O F MOTOR
DASH FR. C B BS 2F 2FF 2FFF
750 143/5 14.75[374.56] 7.25[184.15] 5.53[140.34] 4.00[101.60] 5.00[127.00] 6.25[158.75]
Uncontrolled Copy