Marathon Electric N204 Product Information Packet

Download

PRODUCT INFORMATION PACKET

Model No: 145TTWR14003

Catalog No: N204

2 HP Washdown Motor, 3 phase, 3600 RPM, 230/460 V, 145JM Frame, TEFC

Washdown Duty Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 3

Product Information Packet: Model No: 145TTWR14003, Catalog No:N204 2 HP Washdown Motor, 3 phase, 3600 RPM, 230/460 V, 145JM Frame, TEFC

Nameplate Specifications

Output HP 2 Hp Output KW 1.5 kW Frequency 60 Hz Voltage 230/460 V Current 5.2/2.6 A Speed 3490 rpm Service Factor 1.15 Phase 3 Efficiency 84 % Power Factor 86 Duty Continuous Insulation Class F Design Code B KVA Code L Frame 145JM Enclosure Totally Enclosed Fan Cooled Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6206 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE Y IP Code 55

Technical Specifications

Electrical Type Squirrel Cage Induction Run Starting Method Across The Line Poles 2 Rotation Reversible Resistance Main 6.8 Ohms Mounting Rigid Base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type JM Overall Length 15.43 in Frame Length 7.00 in Shaft Diameter 0.875 in Shaft Extension 4.25 in Assembly/Box Mounting F1 ONLY

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 3

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

607-0013ME

UD 12/27/12

D AS 03/13/2018

ECO-0141420 AS 03/13/2018

KEYWAY FULL DEPTH DIM. UPDATED PER ECO-0141420

OUTLINE

WASHGUARD

TEFC - RIGID "C"

WASHGUARD MOTOR

SPECIAL FEATURES:

SHAFT SEALS & V-RING .1. PLUGGED DRAIN HOLES IN ENDBELLS 2. & CONDUIT BOX. BUNA-N GASKETS THROU G H O U T.3. STAINLESS STEEL SHAF T, HARDWARE 4. & NAMEPLATE.

DASH

NO.

"C" "AD"

700 15.43 4.56 750 15.93 5.06 800 16.43 5.56

6.50

.12

3.50

3.44

7.30

45°

3/8-16 UNC-2B x .56 DEEP

(4) REQ'D. ON A 5.875 B.C.

DECAL CONNECTION

UNDER COVER

6.50

1.65

FULL DEPTH

"C" .06

4.25

4.13.12

3.625.51

1.375

1.1560

1.1555

.19 SQ. x 1.50 KEY

NAMEPLATE

CE DECAL

DRAIN HOLE

DECAL

WARNING DECAL

4.26

5.45

7.39

4.00

5.00

5.50

2.75

"AD" 2.88±.09

4.500

4.497

1.0000 .9995

.8745 .8740

(6) .34 HOLES

3/8-16 UNC-3B x .88

(1) 1/2-14 NPT CONDUIT HOLE

(PLUGGED)

.004 H

.002 G