Marathon Electric GT5107 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 145TTFR16057

Catalog No: GT5107

2 HP Close-Coupled Pump Motor, 3 phase, 1800 RPM, 230/460 V, 145JMV Frame, TEFC

JM Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 145TTFR16057, Catalog No:GT5107 2 HP Close-Coupled Pump Motor, 3 phase, 1800 RPM, 230/460 V, 145JMV Frame, TEFC

Nameplate Specifications

Output HP 2 Hp Output KW 1.5 kW Frequency 60 Hz Voltage 230/460 V Current 6.0/3.0 A Speed 1760 rpm Service Factor 1.15 Phase 3 Efficiency 86.5 % Power Factor 71 Duty Continuous Insulation Class F Design Code A KVA Code N Frame 145JMV Enclosure Totally Enclosed Fan Cooled Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6206 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE Y IP Code 43

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter Poles 4 Rotation Reversible Resistance Main 6.58 Ohms Mounting Round Motor Orientation Horizontal Or Shaft Down Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type JM Overall Length 17.79 in Frame Length 9.56 in Shaft Diameter 0.875 in Shaft Extension 4.25 in Assembly/Box Mounting F1 ONLY Outline Drawing B-108614-956 Connection Drawing A-EE7308

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:18/06/2020

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

108614

H. ADIKE 2/16/2018

PST

05/18/2018

ECO-0136108

OUTLINE CONVERSION PROJECT

OUTLINE

100522

140 FR. -BB - TEFC - C'FACE

TERM. END

NOTES:

1.CONDUIT BOX CAN BE ROTATED IN 180° STEPS.

DASH C AG BV

956 17.84 [453.13] 13.59 [345.18] 8.82 [224.02]

4.25

107.83

.16 .10

3.94

2.41

.640 .610

16.259

15.497

2.890

2.860

73.409

72.647

4.500

4.497

114.287

114.211

1.0000 .9995

25.3987

25.3860

1.156

1.154

29.362

29.312

R.05

1.23

R.05

1.23

3.14

79.76

(C)

(AG)

.8745 .8740

22.2110

22.1983

.12

3.17

SLINGER

3/8-16UNC-3B .75 [19.05] MIN. F ULL T HD. I HOLE

.19 [4.82]x.19 [4.82] x1.65 [41.91] KEYWAY

NAMEPLATE READ FROM CONDUIT BOX SIDE

.004 A

5.38

136.59

9.06

230.12

45° 45°

7.12

180.88

7.36

187.05

1.22

30.99

1.89

48.03

1.58

40.13

4.48

113.71

5.890

5.860

149.597

148.835

3 -Ø.88[22.352] KNOCKOUTS

3/8-16UNC-2B .56 [14.22] MIN. F ULL THD. 4 HOLES

2- Ø1.09 [27.69]

KNOCKOUTS