Marathon Electric GT2407 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 145TTDR16333

Catalog No: GT2407

2 HP Close-Coupled Pump Motor, 3 phase, 1800 RPM, 230/460 V, 145JP Frame, ODP

JP Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 145TTDR16333, Catalog No:GT2407 2 HP Close-Coupled Pump Motor, 3 phase, 1800 RPM, 230/460 V, 145JP Frame, ODP

Nameplate Specifications

Output HP 2 Hp Output KW 1.5 kW Frequency 60 Hz Voltage 230/460 V Current 6.0/3.0 A Speed 1750 rpm Service Factor 1.15 Phase 3 Efficiency 86.5 % Power Factor 74.5 Duty Continuous Insulation Class F Design Code B KVA Code N Frame 145JP Enclosure Drip Proof Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6206 Opp Drive End Bearing Size 6203 UL Recognized CSA Y CE Y IP Code 22

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter Poles 4 Rotation Reversible Resistance Main 6.4 Ohms Mounting Rigid Base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Rolled Steel Shaft Type JP Overall Length 18.68 in Frame Length 9.56 in Shaft Diameter 0.875 in Shaft Extension 7.31 in Assembly/Box Mounting F1 ONLY Outline Drawing A-108590-956 Connection Drawing A-EE7308

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:07/01/2021

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELO I T AMERICA, INC. (" OWNER") AND CONTAI NS OWNER'S PROP RIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CO RPORATION OR OTHER E NTITY, DUPLICATE D, AND/OR USED, EX CE PT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNE R UPON REQUEST. IT M AY BE SUBJE CT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC. INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/ . 381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200

5.1

INCH mm mm SHOWN IN [BRACKETS]

124

5678

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVIS ION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

D 108590

A. KEETHA 02/27/2018

PST

05/18/2018

ECO-0136108

OUTLINE CONVERSION PROJECT

OUTLINE

100132

140 FR.-BB-DR.PR.-3Ø-C' FACE-JP EXT.

NOTES: CONDUIT BOX CAN BE ROTATED IN180° STEPS.

DASH

NO.

"C" "AG" "BS"

956 18.67[474.21] 11.37[288.79] 5.87[149.09]

5.952

5.922

151.183

150.421

4.500

4.497

114.300

114.224

1.0000 .9995

25.4000

25.3873

1.156

1.154

29.362

29.312

1.578

1.548

40.084

39.322 .16

.10

3.94

2.41

6.50

165.10

5.00

127.00

4.00

101.60

.50

12.70

3.14

79.76

7.31

185.55

("C")

("AG")

"BS"

.8745 .8740

22.2123

22.1996

2.75

69.85

.12

3.17

.09[2.28]X.19[4.82].X1.65[41.91]

KEYWAY

NAMEPLATE READ FROM CONDUIT BOX SIDE

3/8-16 UNC-3B

.75[19.05] FULL THD.

1 HOLE

SLINGER

TERM END

.004 A

6.50

165.10

5.50

139.70

2.75

69.85

.12

3.04

3.50

3.44

88.98

87.45

6.72

170.59

5.890

5.860

149.597

148.835

45°

8.52

216.43

5.28

134.14

4.44

112.78

.82

20.83

1.81

45.97

6.48

164.59

Ø .34[8.63] - .35[8.89] 6 HOLES

3/8-16 UNC-2B .56[14.22] MIN . FULL THD. 4 HOLES

3-Ø.88[22.35] KNOCKOUTS

2-Ø1.09[27.68] KNOCKOUTS