Marathon Electric E202-P Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 184TTFN16056

Catalog No: E202-P

5 HP General Purpose Motor, 3 phase, 1800 RPM, 230/460 V, 184T Frame, TEFC

Three Phase TEFC Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 184TTFN16056, Catalog No:E202-P 5 HP General Purpose Motor, 3 phase, 1800 RPM, 230/460 V, 184T Frame, TEFC

Nameplate Specifications

Output HP 5 Hp Output KW 3.7 kW Frequency 60 Hz Voltage 230/460 V Current 12.4/6.2 A Speed 1755 rpm Service Factor 1.15 Phase 3 Efficiency 90.2 % Power Factor 83.5 Duty Continuous Insulation Class F Design Code B KVA Code J Frame 184T Enclosure Totally Enclosed Fan Cooled Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6206 Opp Drive End Bearing Size 6206 UL Recognized CSA Y CE Y IP Code 43

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter Poles 4 Rotation Reversible Resistance Main 2.62 Ohms Mounting Rigid base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Cast Iron Shaft Type T Overall Length 17.87 in Frame Length 10.00 in Shaft Diameter 1.125 in Shaft Extension 2.85 in Assembly/Box Mounting F1/F2 CAPABLE Outline Drawing 035662-1000 Connection Drawing EE7308

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:27/03/2020

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATI ON - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHE R FIRM RECEIVING IT IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTI TY, DUPLICATED, AND/OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES (EXCEPT AS NOTED): DEC.

INCH mm ANG LE .X 0.1 [ 3] 7' 30" .XX 0.03 [ 0.8] .XXX 0.005 [ 0.13] .XXXX 0.0005 [ 0.013] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.08/.38] X 45 CORNER FILLETS: R.02 [.5] MACHINED SURFACES:

200

5.1 INCH mm mm DIMENSIONS IN [BRACKETS] ARE FOR REFERENCE ONLY

THIRD ANGLE PROJECTION

ECO DESCRIPTION

DATEAPPROVED BY

REV DATE/

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

035662

TJW

3/25/2008

3/26/2008

E SD 10/29/2019

ECO-0175786 RG 10/29/2019

DASH TABLE UPADTED

OUTLINE

180 FR. - SHEET METAL C'BOX

DASH FRAME C B 2F 2FF BS

1000 184 17.87 8.61 7.50 5.50 3.75

800 182/184 15.87 6.61 5.50 4.50 2.75

7.50

190.5

3.75

95.3

4.50

4.44

114.3

112.8

2.12

53.8

8.10

205.7

13.20

335.3

8.88

225.6

1.57

39.8

.45

11.4

11.66

296.1

6.52

165.6

2.12

53.8

.41-.46 THRU

8 HOLES

1.09

LEAD HOLE

2.85

72.4

2FF

2.75

69.9