Marathon Electric 213TTGN6528 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 213TTGN6528

Catalog No: C366A

7.50 HP Explosion Proof Motor, 3 phase, 1800 RPM, 230/460 V, 213TC Frame, EPFC Explosion Proof NEMA Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 213TTGN6528, Catalog No:C366A 7.50 HP Explosion Proof Motor, 3 phase, 1800 RPM, 230/460 V, 213TC Frame, EPFC

Nameplate Specifications

Output HP 7.50 Hp Output KW 5.6 kW Frequency 60 Hz Voltage 230/460 V Current 20.0/10.0 A Speed 1770 rpm Service Factor 1.15 Phase 3 Efficiency 91.7 % Power Factor 76.5 Duty Continuous Insulation Class F Design Code B KVA Code H Frame 213TC Enclosure Explosion Proof Fan cooled Thermal Protection Thermostats (N/C) Ambient Temperature 40 °C Drive End Bearing Size 6309 Opp Drive End Bearing Size 6208 UL UL Listed; also, UL Certified for Canada CSA N CE N IP Code 54

Hazardous Location

EXP PROOF CL I GR D CL II GR F&G T3B

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter Poles 4 Rotation Reversible Resistance Main 1.18 Ohms Mounting Rigid Base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Cast Iron Shaft Type T Overall Length 20.45 in Frame Length 9.12 in Shaft Diameter 1.375 in Shaft Extension 3.12 in Assembly/Box Mounting F1 ONLY

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

037702

PN 9/2/2010

F MVG 02/14/2018

ECO-0139688 ST 02/14/2018

UPDATED PER ECO

OUTLINE

037660

210 FR. - EPFC

NOTES:

1. CONDUIT BOX CAN BE ROTATED IN 90 STEPS.

2. CONDUIT BOX CAN BE MOUNTED IN OPPOSITE SIDE BY REMOVING BRACKETS AND TURNING FRAME 180 . THIS MODIFICATION CAN BE PERFORMED ONLY BY THE ORGINAL EQUIPMENT MANUFACTURER, OR BY A FACILITY THAT IS COVERED UNDER UNDERWRITERS LABORATORIES INC. CATEGORY PTKQ, TITLED "M OTOR AND GENERATORS,. REBUILT FOR USE IN HAZARDOUS LOCATION".

3. NAMEPLATE TO BE READ FROM CONDUIT BOX SIDE OF MOTOR.

F2 VIEW

1212 215 23.45 11.76 10 7 5 20.11

912 213/215 20.45 8.63 7 5.5 3.5 17.11

DASH FRAME C B 2F 2FF BS AG

8.50

9.88

4.25

1.56

.62

5.25

5.19

2.34

8.54

11.20

45°

11.77

12.83

17.05

7.236

7.264

.40

8 HOLES

3/4"NPT LEAD HOLE

1/2-13 UNC-2B .75 FULL THD. 4 HOLES

1.83

4.25

2FF

6.24

3.12

.31 .25

1.3750

1.3745

8.500

8.495

8.90

.25

(C)

(AG)

TERM END

.31x.31x2.38 KEY

-A-

.004 A