Marathon Electric 213TTGN6526 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 213TTGN6526

Catalog No: U006A

7.50 HP Explosion Proof Motor, 3 phase, 1800 RPM, 230/460 V, 213T Frame, EPFC Explosion Proof NEMA Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 213TTGN6526, Catalog No:U006A 7.50 HP Explosion Proof Motor, 3 phase, 1800 RPM, 230/460 V, 213T Frame, EPFC

Nameplate Specifications

Output HP 7.50 Hp Output KW 5.6 kW Frequency 60 Hz Voltage 230/460 V Current 20.0/10.0 A Speed 1770 rpm Service Factor 1.15 Phase 3 Efficiency 91.7 % Power Factor 76.5 Duty Continuous Insulation Class F Design Code B KVA Code H Frame 213T Enclosure Explosion Proof Fan cooled Thermal Protection Thermostats (N/C) Ambient Temperature 40 °C Drive End Bearing Size 6307 Opp Drive End Bearing Size 6208 UL UL Listed; also, UL Certified for Canada CSA N CE N IP Code 54

Hazardous Location

EXP PROOF CL I GR C&D CL II GR F&G T3B

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter Poles 4 Rotation Reversible Resistance Main 1.18 Ohms Mounting Rigid Base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Cast Iron Shaft Type T Overall Length 19.63 in Frame Length 9.12 in Shaft Diameter 1.375 in Shaft Extension 3.48 in Assembly/Box Mounting F1 ONLY

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200 5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

037660

AK 10/28/2009

G MVG 02/08/2019

ECO-0139404 SR 02/08/2019

OUTLINE UPDATED AS PER ECR-0149056

OUTLINE

SS84370

210 FR. - EPFC

NOTES:

1. CONDUIT BOX CAN BE ROT AT ED IN 90 STEPS.

2. CONDUIT BOX CAN BE MOUNTED IN OPPOSITE SIDE BY REMOVING BRACKETS AND TURNING FRAME 180 . THIS MODIFICATION CAN BE PERFORMED ONLY BY THE ORGINAL EQ U IPMENT MANUF AC TURER, OR BY A FACILITY THAT IS COVERED UNDER UNDERWRITERS LABORATORIES INC. CATEGORY PTKQ, TI T LED "M O T O R AND GENERATORS,. REBUILT FOR USE IN HAZARDOUS LOCATION".

3. NAMEPLATE TO BE READ FROM CONDUIT BOX SIDE OF MOTO R.

1212 215 22.63 11.76 10 7 5

912 213/215 19.63 8.63 7 5.5 3.5

DASH FRAME C B 2F 2FF BS

1.83

3.38

3.48

1.3750

1.3745

3.50BS

2FF

6.24

TERM. END

.31x.31x2.38 KEY

8.50

9.88

4.25

1.56

5.25

5.19

8.54

2.34

.62

11.18

11.77

12.92

17.00

.40

8 HOLES

3/4"NPT LEAD HOLE

F2 MOUNTING