Marathon Electric 145TTDR4015 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 145TTDR4015

Catalog No: E130

2 HP Close-Coupled Pump Motor, 3 phase, 3600 RPM, 200 V, 145JM Frame, ODP

JM Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2019 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 41 of 4

Product Information Packet: Model No: 145TTDR4015, Catalog No:E130 2 HP Close-Coupled Pump Motor, 3 phase, 3600 RPM, 200 V, 145JM Frame,
ODP

Nameplate Specifications

Output HP 2 Hp Output KW 1.5 kW
Frequency 60 Hz Voltage 200 V
Current 6.2 A Speed 3510 rpm
Service Factor 1.15 Phase 3
Efficiency 84 % Power Factor 81.2
Duty Continuous Insulation Class B
Design Code B KVA Code K
Frame 145JM Enclosure Drip Proof
Thermal Protection No Ambient Temperature 40 °C
Drive End Bearing Size 6206 Opp Drive End Bearing Size 6203
UL Recognized CSA Y
CE Y IP Code 22

Technical Specifications

Electrical Type Squirrel Cage Induction Run Starting Method Across The Line
Poles 2 Rotation Reversible
Resistance Main 7.8 Ohms Mounting Rigid Base
Motor Orientation Horizontal Drive End Bearing Ball
Opp Drive End Bearing Ball Frame Material Rolled Steel
Shaft Type JM Overall Length 13.12 in
Frame Length 7.06 in Shaft Diameter 0.875 in
Shaft Extension 4.25 in Assembly/Box Mounting F1 Only

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 42 of 4

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

100130

SMC

09-30-1999

ML

01-24-1999

F A. KEETHA 01/05/2018

ECO-0143026 PST 04/11/2018

OUTLINE CONVERSION PROJECT

OUTLINE

100130

140 FR. - DR. PR. 3Ø - C'FACE JM EXT.

TERM. END

DASH

NO.

"C" "AG" "BS"

706 13.11[332.99] 8.87[ 225.29] 3.37[85.59]
756 13.61[345.69] 9.37[ 237.99] 3.87[98.29]
806 14.11[358.39] 9.87[ 250.69] 4.37[110.99]
856 14.61[371.09] 10.37[263.39] 4.87[ 123.69]
906 15.11[383.79] 10.87[276.09] 5.37[ 136.39]

C

AG

4.25

107.83

2.890

2.860

73.409

72.647

.640
.610

16.259

15.497
.16

.10

3.94

2.41

6.50

165.10

5.00

127.00

4.00

101.60

.50

12.70

BS

1.156

1.154

29.362

29.312

1.0000
.9995

25.3987

25.3860

4.500

4.497

114.287

114.211

3.14

79.76

R.05

1.23

.8745
.8740

22.2110

22.1983

2.75

69.85

.12

3.17

.19[4.82]X.19[4.82]X1.65[41.91]

KEYWAY

SLINGER

3/8-16UNC-3B
.75[19.05] MIN. F ULL
1 HOLE

NAMEPLATE READ FROM
CONDUIT BOX SIDE

.004 A

.004 A

A

.82

20.83

1.81

45.97

6.50

165.10

5.50

139.70

2.75

69.85

8.56

217.40

.12

3.04

6.72

170.59

3.50

3.44

88.98

87.45

45°

45°

4.44

112.78

5.28

134.14

8.52

216.51

5.890

5.860

149.597

148.835

6.48

164.67

2-Ø1.09[27.68]
KNOCKOUTS

3-Ø.88[22.35]
KNOCKOUTS

Ø.34[8.63]-.35[8.89]
6 HOLES

3/8-16 UNC-2B
.56[14.22] MIN. F ULL T HD.
4 HOLES

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

100130

SMC

09-30-1999

ML

01-24-1999

F A. KEETHA 01/05/2018

ECO-0143026 PST 04/11/2018

OUTLINE CONVERSION PROJECT

OUTLINE

100130

140 FR. - DR. PR. 3Ø - C'FACE JM EXT.

TERM. END

DASH

NO.

"C" "AG" "BS"

706 13.11[332.99] 8.87[ 225.29] 3.37[85.59]
756 13.61[345.69] 9.37[ 237.99] 3.87[98.29]
806 14.11[358.39] 9.87[ 250.69] 4.37[110.99]
856 14.61[371.09] 10.37[263.39] 4.87[ 123.69]
906 15.11[383.79] 10.87[276.09] 5.37[ 136.39]

Uncontrolled Copy

3 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 43 of 4

THREE PHASE - SINGLE VOLTAGE

THREE PHASE - SINGLE VOLTAGE
MOTOR - CONDUIT BOX @ 'A'

MOTOR - CONDUIT BOX @ 'A'

TO REVERSE ROTATION:

TO REVERSE ROTATION:
INTERCHANGE ANY TWO

INTERCHANGE ANY TWO
LINE LEAD CONNECTIONS.

LINE LEAD CONNECTIONS.

IF MOTOR HAS

IF MOTOR HAS

6 LEADS

6 LEADS

C

C

Uncontrolled Copy

T3

T3

T1

T1

B

B

T2

T2

TERMI NAL BLOCK WHEN SPECIFIED

TERMI NAL BLOCK WHEN SPECIFIED

L1

L1

L2

L2

L3

L3

A

A

T1

T1

T2

T2

T3

T3

T1 (U1)

T1 (U1)

T2 (V1)

T2 (V1)

T3 (W1)

T3 (W1)

T1(U1)

T1(U1)
T1(U1)

T1(U1)

T2(V1)

T2(V1)
T2(V1)

T2(V1)

T3(W1)

T3(W1)
T3(W1)

T3(W1)

A-9806 DECAL

A-9806 DECAL

REVISION BY DATE

DRAWING REVISION

DRAWING REVISION

AB

AB

ECO

ECO

ECO-0125361

ECO-0125361

ECO DESCRIPTION

ECO DESCRIPTION

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED

BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCE P T

TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AND/OR USED, EXCE P T

UPDATED TO CURRENT STANDARDS

UPDATED TO CURRENT STANDARDS

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATI ON OR OTHER FIRM RECEIVING IT IS DEEMED,

INFORMATION. ANY PERSON, CORPORATI ON OR OTHER FIRM RECEIVING IT IS DEEMED,

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

REVISION BY DATE

APPROVED BY DATE

APPROVED BY DATE

JJB

JJB

TB

TB

L1

L1

L2

L2

L3

L3

06-27-2017

06-27-2017
06-27-2017

06-27-2017

D

D

VIEW OF TERMINAL END

VIEW OF TERMINAL END

DRAWN BY

DRAWN BY

DATE

DATE

APPROVED BY

APPROVED BY

DATE

DATE

REFERENCE

REFERENCE

THIRD ANGLE

THIRD ANGLE
PROJECTION

PROJECTION

DA

DA

03-26-1993

03-26-1993

TB

TB

03-26-1993

03-26-1993

TM

TM

Regal Beloit America , Inc.

Regal Beloit America , Inc.

DESCRIPTION

DESCRIPTION

CONNECTION DIA GRAM

CONNECTION DIA GRAM

EXTERNAL - SINGLE VOLTAGE - 3Ø MOTOR

EXTERNAL - SINGLE VOLTAGE - 3Ø MOTOR

MATERIAL

MATERIAL

SIZE DRAWING NUMBER

SIZE DRAWING NUMBER

A

A

4 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 44 of 4

L1

L1

L2

L2

L3

L3

EE7300

EE7300

OPTIONAL CORD

OPTIONAL CORD

CONNECTION

CONNECTION

WHITE

WHITE

RED

RED

BLACK

BLACK

PROCESS/FINISH

PROCESS/FINISH

SHEET

SHEET

1 OF 1

1 OF 1