Marathon Electric 056T34D5309 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 056T34D5309

Catalog No: G186

2 HP Fan and Blower HVAC/R Motor, 3 phase, 3600 RPM, 208-230/460 V, 56 Frame, ODP

Other Fan and Blower Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2019 Regal Beloit Corporation, All Rights Reserved. MC017097E

1 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 71 of 7

Product Information Packet: Model No: 056T34D5309, Catalog No:G186 2 HP Fan and Blower HVAC/R Motor, 3 phase, 3600 RPM, 208-230/460 V, 56
Frame, ODP

Nameplate Specifications

Output HP 2 Hp Output KW 1.49 kW
Frequency 60 Hz Voltage 208-230/460 V
Current 6.4-6.2/3.1 A Speed 3450 rpm
Service Factor 1.15 Phase 3
Efficiency 80 % Power Factor 78.2
Duty CONTINUOUS Insulation Class B
Design Code B KVA Code J
Frame 56 Enclosure DP
Thermal Protection AUTOMATIC Ambient Temperature 40 °C
Drive End Bearing Size 6203 Opp Drive End Bearing Size 6203
UL Recognized ( Not Protector) CSA Y
CE Y IP Code 22

Technical Specifications

Electrical Type SQ CAGE IND RUN Starting Method ACROSS THE LINE
Poles 2 Rotation REV
Resistance Main 2.65 Ohms Mounting RESILIENT BASE
Motor Orientation HORIZONTAL Drive End Bearing BALL
Opp Drive End Bearing BALL Frame Material ROLLED STEEL
Shaft Type T Overall Length 10.85 in
Frame Length 6.56 in Shaft Diameter 0.63 in
Shaft Extension 1.91 in Assembly/Box Mounting F1 Only

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 72 of 7

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

100128

PGK

06-06-1997

GK

06-11-1997

M KHADHAR UD

ECO-0157345 JD 11/27/2018

ADDED GREEN GROUND LEAD WIRE ON DRAWING

OUTLINE

100128

56 FR. - DR.PR. - 3Ø - RESIL. MT.

TERM. END

NOTE:

1.DIMENSION IS FROM RESILIENT R ING END CAP TO END O F SHAFT.

*

DASH C XB

606 10.34 [262.63] 0
656 10.84 [275.33] 0
706 11.34 [288.03] 0
756 11.84 [300.73] 5.00 [127.00]
806 12.34 [313.43] 5.00 [127.00]
856 12.84 [326.13] 5.00 [127.00]
906 13.34 [338.83] 5.00 [127.00]
956 13.84 [351.53] 5.00 [127.00]

(C)

1.91

48.50

.6250
.6245

15.87

15.86

3.00

76.20

XB

1.95

49.61

.35

8.89

2.75

69.85

1.88

47.79

.50 [12.70] NPS

LEAD HOLE

.19 [4.82]SQ x 1.38[35.05]
KEY

NAMEPLATE READ
FROM LEAD HOLE
SIDE

*

6.48

164.55

6.50

165.10

4.88

123.95

2.44

61.98

R.18

4.45

.44

11.05

.87

22.10

3.50

3.44

88.90

87.38

6.71

170.41

.12

3.05

Regal Beloit America, Inc.

TM

COPYRIGHT REGAL BELOIT AMERICA, INC. ALL RIGHTS RESERVED.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED,
BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED
TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS
OTHERWISE SPECIFIED:
DEC.

INCH mm ANGLE
.X 0.1 [ 2.5] 7' 30"
.XX 0.03 [ 0.76]
.XXX 0.005 [ 0.127]
.XXXX 0.0005 [ 0.0127]
REMOVE BURRS & BREAK SHARP
EDGES: .003/.015 [.076/.381] X 45
CORNER FILLETS: R.02 [.51]
MACHINED SURFACES:

200 5.1

INCH mm
mm SHOWN IN [BRACKETS]

12

43

A

B

2

43

1

A

B

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE
PROJECTION

DRAWN BY

DATE

DATE

APPROVED BY

PROCESS/FINISH

B

1 OF 1

100128

PGK

06-06-1997

GK

06-11-1997

M KHADHAR UD

ECO-0157345 JD 11/27/2018

ADDED GREEN GROUND LEAD WIRE ON DRAWING

OUTLINE

100128

56 FR. - DR.PR. - 3Ø - RESIL. MT.

TERM. END

NOTE:

1.DIMENSION IS FROM RESILIENT R ING END CAP TO END O F SHAFT.

*

DASH C XB

606 10.34 [262.63] 0
656 10.84 [275.33] 0
706 11.34 [288.03] 0
756 11.84 [300.73] 5.00 [127.00]
806 12.34 [313.43] 5.00 [127.00]
856 12.84 [326.13] 5.00 [127.00]
906 13.34 [338.83] 5.00 [127.00]
956 13.84 [351.53] 5.00 [127.00]

Uncontrolled Copy

3 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 73 of 7