Marathon Electric 056T17W99010 Product Information Packet

PRODUCT INFORMATION PACKET

Model No: 056T17W99010

Catalog No: N765

1.50 HP Washdown Motor, 3 phase, 1800 RPM, 208-230/460 V, 56C Frame, TEFC Washdown Duty Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 3

Product Information Packet: Model No: 056T17W99010, Catalog No:N765 1.50 HP Washdown Motor, 3 phase, 1800 RPM, 208-230/460 V, 56C Frame, TEFC

Nameplate Specifications

Output HP 1.50 Hp Output KW 1.1 kW Frequency 60 Hz Voltage 208-230/460 V Current 4.5-4.4/2.2 A Speed 1740 rpm Service Factor 1.15 Phase 3 Efficiency 84 % Power Factor 76 Duty Continuous Insulation Class F Design Code B KVA Code K Frame 56C Enclosure Totally Enclosed Fan Cooled Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6205 Opp Drive End Bearing Size 6205 UL Recognized CSA Y CE Y IP Code 66

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter Poles 4 Rotation Reversible Resistance Main 2.52 Ohms Mounting Rigid Base Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Stainless Steel Shaft Type NEMA 56 Overall Length 11.69 in Frame Length 6.75 in Shaft Diameter 0.625 in Shaft Extension 1.88 in Assembly/Box Mounting F1 Only

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 3

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTIAL INFORMATION - THIS DOCUMENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING I T IS DEEMED, BY RECEIVING IT, TO AGREE THAT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, A ND/ OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVANCE BY OWNER. THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGULATIONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 0.5 .XX 0.01 [ 0.25] XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] CORNER FILLETS: .02 [.51] MACHINED SURFACES:

125 3.2

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

607-0174

LST

6/12/14

F UDAY 10/05/2017

ECO-0132348 REETESH 10/05/2017

ADDED DASH # 825

OUTLINE

56C FRAME - TEFC- RIGID "C"

DASH

NO.

"C" "AD"

625 11.19 3.65 675 11.69 4.15 700 11.94 4.40 725 12.19 4.65 750 12.44 4.90 775 12.69 5.15 800 12.94 5.40 825 13.19 5.65

6.94

176.28

REF.

1.21

30.73

4.93

125.22

6.50

165.10

.13

3.30

3.50

3.44

88.90

87.38

45° 45°

5.34

135.64

2.47

62.61

7.17

181.99 REF.

(4) 3/8-16 UNC-2B X .56 DEEP ON A 5.875 B.C.

OIL SEAL

1/8-27 NPT PIPE PLUG

6.56

166.50

7.40

4.500

4.497

114.30

114.22

3.00

76.20

2.25

57.15

2.06

52.33

1.875

47.625

.6250 .6245

15.88

15.86

4.75

120.65

.34

8.64

1.41

35.81

FULL DEPTH

.13

3.18

1.94

49.16

"AD"

"C" .06

NAMEPLATE

1/2-14 NPT CONDUIT HOLE (PLUGGED)

3/4" HEX DRIVER FOR COVER REMOVAL

.19 SQR. X 1.38 KEY

.004 A

.002 A