Marathon Electric 056T17V5356 Product Information Packet

Download

PRODUCT INFORMATION PACKET

Model No: 056T17V5356

Catalog No: N464A

1 HP Washdown Motor, 3 phase, 1800 RPM, 208-230/460 V, 56C Frame, TENV

Washdown Duty Motors

Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.

1 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 31 of 3

Product Information Packet: Model No: 056T17V5356, Catalog No:N464A 1 HP Washdown Motor, 3 phase, 1800 RPM, 208-230/460 V, 56C Frame, TENV

Nameplate Specifications

Output HP 1 Hp Output KW 0.75 kW Frequency 60 Hz Voltage 208-230/460 V Current 3.1-3.0/1.5 A Speed 1725 rpm Service Factor 1.15 Phase 3 Efficiency 81.5 % Power Factor 77 Duty Continuous Insulation Class F Design Code B KVA Code K Frame 56C Enclosure Totally Enclosed Non Ventilated Thermal Protection No Ambient Temperature 40 °C Drive End Bearing Size 6205 Opp Drive End Bearing Size 6205 UL Recognized CSA Y CE Y IP Code 56

Technical Specifications

Electrical Type Squirrel Cage Inverter Rated Starting Method Line Or Inverter Poles 4 Rotation Reversible Resistance Main 0 Ohms Mounting Round Motor Orientation Horizontal Drive End Bearing Ball Opp Drive End Bearing Ball Frame Material Stainless Steel Shaft Type NEMA 56 Overall Length 12.50 in Frame Length 7.50 in Shaft Diameter 0.625 in Shaft Extension 1.88 in Assembly/Box Mounting F1 ONLY

This is an uncontrolled document once printed or downloaded and is subject to change without notice. Date Created:01/11/2019

2 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 32 of 3

Regal Beloit America, Inc.

PROPRIETARY AND CONFIDENTI AL INFORMATION - THIS DOCU MENT IS THE PROPERTY OF

REGAL BELOIT AMERICA, INC. ("OWNER") AND CONTAINS OWNER'S PROPRIETARY

INFORMATION. ANY PERSON, CORPORATION OR OTHER FIRM RECEIVING IT IS DEEMED, BY RECEIVING IT, TO AGREE T H AT IT, AND/OR ANY PART OF IT, SHALL NOT BE DISCLOSED TO ANY PERSON, CORPORATION OR OTHER ENTITY, DUPLICATED, AN D /OR USED, EXCEPT

AS EXPRESSLY APPROVED IN WRITING IN ADVAN C E BY O W NER . THIS DOCUMENT SHALL

BE RETURNED TO OWNER UPON REQUEST. IT MAY BE SUBJECT TO CERTAIN

RESTRICTIONS UNDER APPLICABLE EXPORT CONTROL LAWS AND REGUL AT IONS.

TOLERANCES UNLESS OTHERWISE SPECIFIED: DEC.

INCH mm ANGLE .X 0.1 [ 2.5] 7' 30" .XX 0.03 [ 0.76] .XXX 0.005 [ 0.127] .XXXX 0.0005 [ 0.0127] REMOVE BURRS & BREAK SHARP EDGES: .003/.015 [.076/.381] X 45 CORNER FILLETS: R.02 [.51] MACHINED SURFACES:

200

5.1

INCH mm mm SHOWN IN [BRACKETS]

ECO DESCRIPTION

DATEAPPROVED BY

DATEREVISION BY

ECO

DRAWING REVISION

REFERENCE

MATERIAL

SHEET

DRAWING NUMBERSIZE

DESCRIPTION

THIRD ANGLE PROJECTION

DRAWN BY

DATE

APPROVED BY

PROCESS/FINISH

1 OF 1

028942

LST 1/9/09

D AS 05/04/2017

ECO-0123079 JD 05/04/2017

ADDED ITEM # 800 & PLUGGED CONDUIT HOLE

OUTLINE

TENV ROUND "C" FACE

DASH

NO.

"C" "AD"

525 10.47 7.00 550 10.72 7.25 575 10.97 7.50 600 11.22 7.75 625 11.47 8.00 650 11.72 8.25

675 11.97 8.50 700 12.22 8.75 750 12.72 9.25 800 13.22 9.75

3/4" HEX DRIVER FOR COVER REMOVAL

1.95

49.40

.13

3.18

.6250 .6245

15.8750

15.8623

1.875

47.625

.07

1.78

2.07

52.58

1.41

FULL

DEPTH

35.81

4.500

4.497

114.300

114.224

"C" .06

6.55

"AD"

NAMEPLATE

1/2-14 NPT CONDUIT HOLE (PLUGGED)

.19 SQ. X 1.38 KEY

.004 A

.002 A