Marathon Excel Phire 245, Excel Phire 255 User Manual

ASI TECHNOLOGIES, INC. • 5848 N. 95th Court • Milwaukee, WI 53225 • [phone] • [phone] • FAX: [phone] • www.asidoors.com

FEATURES

Marathon® Excel

Single Sliding Horizontal Cleanroom Door
Manual or Power Operated

Data Sheet

Model 245- Manual

Model 255 - Power

• Unitized high strength 1-3/4" thick 16 gauge stainless
steel panel for easy cleaning. Stainless steel (20
gauge) edge capping for added strength and
protection.

• Corrosion-resistant, heavy-duty door hardware.
Recessed stainless steel pull handles.

• Top/bottom guidance system positively maintains door
seal and position. Ensures fast, controlled operation
with minimal gasket wear.

• Adjustable top/bottom panel hardware for in-field
adjustments. Maintains a positive and tight seal.

• Full perimeter containment seal under
positive/negative pressure.

• Stainless steel shroud conceals rail (and operator on
powered model)

• U.L. 10B classification 90 minute rating.

• Stainless steel fusible link.

• Spring closure with adjustable closing speed to close
door upon release of fusible link.

Power model also includes:

• Electromechanical operator with NEMA 4X, U.L. 508A
control panel.

• Specially designed heavy-duty gearbox. Manual
operation during unexpected power failures.

• High strength Kevlar drive belt for quiet reliable
operation.

• U.L. 325 classified operator and system.

Shown with Optional Vision Panel

5848 N. 95th Court • Milwaukee, WI 53225 • [phone] • [phone] • FAX: [phone] • www.asidoors.com

245-255-10/2007R

©2003, ASI TECHNO LOGIES, INC. • PRI NTED IN U.S.A.Consistent with our policy of continued product improvement, we reserve the right to change product specifications without notice or obligation.

Model 255 Power

For complete Architectural Specifications

contact ASI or visit www.asidoors.com

DESIGN AND

CONSTRUCTION

DOOR SIZE S

Min: 5’ x 7’

Max: 8’ x 9’

(Other sizes available -

Consult factory.)

PANEL

CONSTRUCTION

• Unitized design.

• 16 gauge stainless

steel continuously

welded panel.

• 20 gauge stainless

steel edge capping.

• Full perimeter

gaskets: Non-

marking gray vinyl,

blade type.

OPERATION

• Powered model has

1/4 h.p.

electromechanical

operator with

NEMA 4X

fiberglass control

box.

Open - 24”/sec.

Close - 18”/sec.

• (2) remote push

plates.

PERFORMANCE

FEATURES

• Reversing edge for

instant

stop/reverse.

• (1) Send & receive

reversing photoeye.

INSULATION

• 1-3/4” thick

honeycomb core.

WARRANTY

• One year limited

warranty on all

components.

OPTIONS

• Galvanized steel

clad panel.

• Flat shroud

(requires 14”

headroom).

• Vision panel - wire

mesh or clear fire

lite (optional sizes).

• Available in 20 or

45 minute fire

ratings. (Larger

vision panels

available with these

ratings.)

(Powered Models Only)

• Push plates remote

mounted.

• Additional reversing

photoeye mounted

in side frame.

• Touchless wall-

mounted activation

switch.

• Actuators: Pull

cord; photoeye;

radio control; loop

detector, motion

detector; or O/C/S

push-button.

• Interlock system.

• Battery back-up

power supply.

65"

3-1/2" CONTINUOUS

HOLD DOWN

BRACKET PROVIDED

ALONG LEADING EDGE

43"

WIDTH IN CLEAR (WIC)

SWEEP GASKET

1-1/2"

24"

(1) Photo-eye located 24" up from

the floor line.

(1) Photo-eye located 1-1/2" up from

the floor line.

FLOOR LINE

RECESSED

PULL

HANDLE

CLEARANCE FOR SLIDING WIC + 10"

DUAL STD. RE VERSING

PHOTO-EYES

GASKET SEAL ON DOOR

4" OVERLAP TYP.

6" FACE TRIM TYP.

(MANUAL DOOR WIC + 10-1/2")

WIC + 24"

CONTROL CABLE

SUPPLIED BY ASI

SPECIFY CABLE

LENGTH

10-1/4"

REVERSING EDGE

(MANUAL DOOR -TOTAL LENGTH (2)WIC + 16-1/2")

TOTAL LENGTH (2)WIC + 30"

WIC + 17-1/2"

ELECTRICAL ACCESS

(MANUAL DOOR 10-3/8")

GUIDE

ROLLER

4-5/16" TYP.

REMOTE

MOUNT

ELECTRICAL

CONTROL

1-3/4" PANEL

THICKNESS

HEIGHT IN CLEAR (HIC)

( MANUAL DOOR -TOTAL HEIGHT HIC + 18-1/2")

TOTAL HEIGHT HIC + 17"

BOX

9"

MOUNTING HARDWARE

SUPPLIED BY OTHERS