Marathon CL030053GD, CL030053SV, CL030053BK, CL030053WH, CL030053BL User Manual

Thank you for purchasing this Analog Desk Alarm Clock with
Auto-Night Light. The utmost care has gone into the design
and manufacture of your clock. Please read the instructions
carefully and keep this manual for future reference.

CL030053BK

CL030053WH

CL030053BL

CL030053SV

CL030053GD

MAIN FEATURES

- Alarm and snooze function

- Backlight and night-light function

FUNCTION KEYS

1. [ SNOOZE/LIGHT ] key:

- Press to turn on backlight for 3 seconds.
When the alarm is sounding, press to enter snooze
mode for 4 minutes.

2. [ ALARM ON/OFF ] key:

- Press to turn on or turn off the alarm.

3. Night light sensor

automatically turn on in dim & dark environments as
detected by the light sensor.

- The brightness of the night light is dimmer than the normal
backlight.

- Slide to the < OFF > position to turn off the night light
function.

5.

[ SET ALARM ] knob:

- Adjust to set the alarm time.

DISPLAY

1. Hour hand

2. Alarm hand

3. Second hand

4. Minute hand

5. Dial

1

5

4

2

3

GETTING STARTED

- Remove the battery door of the unit.

- Insert 2 new AA size batteries according to the polarity

marks in the battery compartment.

- Replace the battery door.

OPERATION

(1) MANUAL TIME SETTING

After inserting batteries, you can set the time manually.

- Pull the [ SET ALARM ] knob out of the hole.

- Turn the [ SET ALARM ] knob counterclockwise to enter

time setting mode.

(2) ALARM TIME SETTING

Turn the [ SET ALARM ] knob counterclockwise (refer to
diagram below) to set the desired alarm time.

Analog Alarm Clock with

Auto Ambient Light Display

MANUAL ENGLISH

1

Model:

4. [ NIGHT LIGHT ON/OFF ] switch:

- Slide to the < ON > position to activate night light function.

- When switch is in the < ON > position, the backlight will

C1122C_CL030053 Manual A4_01.27.2016.indd 1 2016-02-01 1:51 PM

(3) ALARM ON/OFF

- Press the [ ALARM ON/OFF ] key to activate alarm function.

- Press the [ ALARM ON/OFF ] key again to deactivate alarm
function.

(4) USING THE ALARM AND SNOOZE FUNCTION

When the real time reaches the set alarm time, the alarm
sound will start. The alarm beeping lasts for 120 seconds.
Alarm sound stops under the following conditions:

- If there is no operation, the alarm sound will stop automatically
after 2-minutes of beeping (and re-alarm 12 hours later).

- Press the [ ALARM ON/OFF ] key to stop the alarm sound.

- Press the [ SNOOZE/LIGHT ] key to stop the alarm sound
and enter snooze. After five minutes, the alarm sound will start
again. Snooze can be repeatedly operated up to 7 times.

(5) USING THE NIGHT LIGHT FUNCTION

- Slide the [ NIGHT LIGHT ON/OFF ] switch to the <ON> position
to activate the night light function. When it is <ON>, the
backlight will automatically turn on in dim & dark environments
as detected by the light sensor. The brightness of the normal
backlight is greater than the night light.

- Slide to the <OFF> position to turn off the night light function.

BATTERY REPLACEMENT

When the backlight becomes dim, replace with 2 new AA size
batteries at once. Pay attention to the battery polarity.

ATTENTION:

Please dispose of used batteries and the clock in an
ecologically safe manner.

SPECIFICATIONS

Power 2 x AA 1.5V batteries
Alarm duration 35 +/-5 minutes
Snooze 4~5 minutes; 3~9 times
Dimensions 90(W) x 101(H) x 41mm(D)

MANUAL ENGLISH

2

Designed in Canada / Conçu au Canada
Made in China / Fabriqué en Chine

C1122C_CL030053 Manual A4_01.27.2016.indd 2 2016-02-01 1:51 PM