SERVICE BULLETIN
x for information customer
Circulation: Application:
complaint in case of service
mandatory
...................
[PHENOMENON]
Incorrect parts mixed and were used.
[SOLUTION]
Please exchange for the correct the part.
Correct part no 9965 000 05895 (PCS part no)
LY20240490 (MJI part no)
See Below
Date: 16-July-2002 Model:
PM8200,PS17,
Page: 1/1 REF.NBR: MZ02-013
Subject:
In correct a RELAY part was used.
Int.ref:
Correct part24VDC
Incorrect part 12VDC
POS.NO. PCB name Service manual
PM8200 L701 P101-MAIN CIRCUIT BOAD page 9 and page 10
PS17 LB03/ LB04 PB04-BACK UP SUPPLY CIRCUIT BOARD page32
SR8200 LP91 P124-SPK OUTS FRONT SURRBACK page71
HEAD CIRCUIT BOARD
SR9200 LP91 P124-SPK OUTS FRONT SURRBACK page71
HEAD CIRCUIT BOARD
[REMARKS]
There is no problem in the usual use condition , replace a part when it is returned by the repair.
< Application is limited to the following LOT number>
PM8200/N1B/N1G 07 LOT
PS17/S1G 09 LOT
SR8200/U1B/U1G 02-03 LOT
SR8200/S1G 03-04 LOT
SR9200/U1B/S1G 04 LOT
The Lot number and service modification code is mentioned the serial number label on the rear panel.
(ex.MZxxxxxx07xxxx)
AQ-19 2 817/additional rule 3 (first edition2002-03-12)
Approved by M.KIMURA Written by S.NAGAO