Marantz SR-7200 Owners Manual

Model SR7200 User Guide

AV Surround Receiver

R

ENGLISH

ITALIANO

WARRANTY

For warranty information, contact your local Marantz distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valuable purchase.
It should be kept in a safe place to be referred to as necessary for
insurance purposes or when corresponding with Marantz.

IMPORTANT

When seeking warranty service, it is the responsibility of the consumer
to establish proof and date of purchase. Your purchase receipt or in­voice is adequate for such proof.

FOR U.K. ONLY

This undertaking is in addition to a consumer's statutory rights and does
not affect those rights in any way.

FRANÇAIS

GARANTIE

Pour des informations sur la garantie, contacter le distributeur local
Marantz.

CONSERVER L'ATTESTATION D'ACHAT

L'attestation d'achat est la preuve permanente d'un achat de valeur. La
conserver en lieu sur pour s'y reporter aux fins d'obtention d'une
couverture d'assurance ou dans le cadre de correspondances avec
Marantz.

IMPORTANT

Pour l'obtention d'un service couvert par la garantie, il incombe au cli­ent d'établir la preuve de l'achat et d'en corroborer la date. Le reçu ou la
facture constituent des preuves suffisantes.

DEUTSCH

GARANTIE

Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Händler.

HEBEN SIE IHRE QUITTING GUT AUF

Die Quittung dient Ihnen als bleibende Unterlage für Ihren wertvollen
Einkauf Das Aufbewahren der Quittung ist wichtig, da die darin
enthaltenen Angaben für Versicherungswecke oder bei Korrespondenz
mit Marantz angeführt werden müssen.

WICHTIG!

Bei Garantiefragen muß der Kunde eine Kaufunterlage mit Kaufdatum
vorlegen. Ihren Quittung oder Rechnung ist als Unterlage ausreichend.

NEDERLANDS

GARANTIE

Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Marantz.

UW KWITANTIE, KASSABON E.D. BEWAREN

Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een
waardevol artikel en dienen op een veilige plaats bewaard te worden
voor evt, verwijzing bijv, in verbend met verzekering of bij correspondentie
met Marantz.

BELANGRIJK

Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de
consument een gedateerd bewijs van aankoop te tonen. Uw kassabon
of factuurzijn voldoende bewijs.

ESPAÑOL

GARANZIA

L’apparecchio è coperto da una garanzia di buon funzionamento della
durata di un anno, o del periodo previsto dalla legge, a partire dalla data
di acquisto comprovata da un documento attestante il nominativo del
Rivenditore e la data di vendita. La garanzia sarà prestata con la
sostituzione o la riparazione gratuita delle parti difettose.
Non sono coperti da garanzia difetti derivanti da uso improprio, errata
installazione, manutenzione effettuata da personale non autorizzato o,
comunque, da circostanze che non possano riferirsi a difetti di
funzionamento dell’apparecchio. Sono inoltre esclusi dalla garanzia gli
interventi inerenti l’installazione e l’allacciamento agli impianti di
alimentazione.
Gli apparecchi verranno riparati presso i nostri Centri di Assistenza
Autorizzati. Le spese ed i rischi di trasporto sono a carico del cliente.
La casa costruttrice declina ogni responsabilità per danni diretti o indiretti
provocati dalla inosservanza delle prescrizioni di installazione, uso e
manutenzione dettagliate nel presente manuale o per guasti dovuti ad
uso continuato a fini professionali.

PORTUGUÊS

GARANTIA

Para informações sobre a garantia, contactar o distribuidor Marantz lo­cal.

GUARDAR O RECIBO DE COMPRA

O recibo é o registo permanente da compra que fez. Deve ser guardado
num local seguro, para ser apresentado em questões relacionadas com
o seguro ou para quando tiver de contactar a Marantz.

IMPORTANTE

Quando procurar assisténcia técnica ao abrigo da garantia, é da
responsabilidade do consumidor estabelecer a prova e data de compra.
O recibe é prova adequada.

SVENSKA

GARANTI

För information om garantin, kontakta Marantz lokalagent.

SPAR KVITTOT

Kvittot är ett inköpsbevis på en värdefull vara. Det skall förvaras säkert
och hänvisas till vid försäkringsfall eller vidkorrespondens mod Marantz.

VIKTIGT

Fö att garantin skall gälla är det kundens sak att framställa bevis och
datum om köpet. Kvitto eller faktura är tillräokligt bevis fö detta.

DANSK

GARANTI

Henvend dem til Deres MARANTZ-forhandler angående inrformation om
garantien.

GEM DERES KVITTERING

Deres købskvittering er Deres varige bevis på et dyrt køb. Den bør
gemmes godt og anvendes som bevis, hvis De vil tegne en forsikring,
eller hvis De kommunikerer med Marantz.

VIGTIGT

Det påhviler forbrugeren at skaffe bevis for købet og købsdatoen, hvis
han eller hun ønsker garantiservice. Deres købskvittering eller faktura er
et fuldgyldigt bevis herpå.

GARANTIA

Para obtener información acerca de la garantia póngase en contacto
con su distribuidor Marantz.

GUARDE SU RECIBO DE COMPRA

Su recibo de compra es su prueba permanente de haber adquirido un
aparato de valor, Este recibo deberá guardarlo en un lugar seguro y
utilizarlo como referencia cuando tenga que hacer uso del seguro o se
ponga en contacto con Marantz.

IMPORTANTE

Cuando solicite el servicio otorgado por la garantia el usuario tiene la
responsabilidad de demonstrar cuá¥do efectuó la compra. En este caso,
su recibo de compra será la prueba apropiada.

i

CE MARKING

English

The SR7200 is in conformity with the EMC directive and low-voltage directive.

Français

Le SR7200 est conforme à la directive EMC et à la directive sur les basses tensions.

Deutsch

Das Modell SR7200 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte.

Nederlands

De SR7200 voldoet aan de EMC eisen en de vereisten voor laag-voltage.

Español

El SR7200 está de acuerdo con las normas EMC y las relacionadas con baja tensión.

Italiano

Il SR7200 è conforme alle direttive CEE ed a quelle per i bassi voltaggi.

Português

O SR7200 conforma com as diretrizes EMC e de baixa voltagem.

Svenska

SR7200 är tillverkad i enlighet med EMC direktiven och direktiven för lågvoltsutrusning.

Dansk

Model SR7200 er i overensstemmelse med EMC-direktiveet og direktivet om lavspænding.

English

To ventilate the unit, do not install the unit in a rack or bookshelf, and
note the followings.

- Do not touch the top of the enclosure during operation.

- Do not block the openings in the enclosure during operation.

- Do not insert objects beneath the unit.

- Do not block the ventilation slots at the top of the unit.
Do not place anything about 1 meter above the top panel.

- Make a space of about 0.2 meter around the unit.

Français

Pour que l'appareil puisse être correctement ventilé, ne pas l'installer
dans un meuble ou une bibliothèque et respecter ce qui suit.

- Ne pas toucher le dessus du coffret.

- Ne pas obstruer les ouïes de ventilation du coffret pendant le
fonctionnement.

- Ne placer aucun objet sous l'appareil.

- Ne pas obstruer les ouães de ventilation du panneau supérieur. Ne
placer aucun objet à moins d'un mètre environ du panneau supérieur.

- Veiller à ce qu'aucun objet ne soit à moins de 0,2 mètre des côtés de
l'appareil.

Deutsch

Um eine einwandfreie Belüftung des Geräts zu gewährleisten, darf das
Gerät nicht in einem Gestell oder Bücherregal aufgestellt werden; die
folgenden Punkte sind besonders zu beachten:

- Während des Betriebs das Oberteil des Gehäuses nicht berühren.

- Während des Betriebs die Öffnungen im Gehäuse nicht blockieren.

- Keine Gegenstände in das Gerät einführen.

- Die Belüftungsschlitze an der Oberseite des Geräts dürfen nicht
blockiert werden. Darauf achten, daß über dem Gerät ein Freiraum
von mindestens 1 meter vorhanden ist.

- Auf allen Geräteseiten muß ein Zwischenraum von ungefähr 0,2 meter
vorhanden sein.

Italiano

Perch é l'unità possa essere sempre ben ventilata, non installarla in
scaffali o librerie e tenere presente quanto segue.

- Non toccare la parte superiore del rivestimento durante il
funzionamento.

- Non bloccare le aperture sul rivestimento durante il funzionamento.

- Non inserire oggetti al di sotto dell'unità.

- Non bloccare le fessure di ventilazione sopra l'unità.
Non posare nulla per circa un metro sopra il pannello superiore.

- Lasciare 0,2 metro liberi tutto intorno l'unità.

Português

Para ventilar o aparelho, não instalá-lo dentro duma estante ou algo
similar, e observar as seguintes recomendações:

- Não tocar a parte superior do aparelho durante a operação.

- Não bloquear as aberturas do aparelho durante a operação.

- Não insertar objectos debaixo do aparelho.

- Não bloquear as aberturas de ventilação na parte de cima do
aparelho. Deixar um espaço completamente livre de cerca de 1 metro
acima do painel superior.

- Deixar um espaço de cerca de 0,2 metro ao redor do aparelho.

Svenska

För att ventilera enheten, ställ den inte i ett ställ eller bokhylla och tänk
på följande.

- Vidrör inte ytterhöljets ovansida under pågående drift.

- Blockera inte öppningarna i ytterhöljet under pågående drift.

- Stick inte in föremål under enheten.

- Blockera inte ventialtionshålen ovanpå enheten.
Placera inte någonting närmare än 1 meter ovanför apparaten eller
enheten.

- Se till att det finns omkring 0,2 meter fri plats runt omkring enheten.

Nederlands

Installeer het toestel niet in een rek of boekenkast waar de ventilatie
mogelijk wordt gehinderd. Let tevens op de volgende punten:

- Raak de bovenkant van het toestel niet aan als het in gebruik is.

- Blokkeer de openingen van het toestel niet als het in gebruik is.

- Plaats geen onderwerpen onder het toestel.

- Blokkeer de ventilatie-openingen aan de bovenkant van het toestel
niet. Zorg dat er tenminste 1 meter vrije ruimte boven het toestel is.

- Zorg dat er 0,2 meter vrije ruimte rond het toestel is.

Español

Para ventilar la unidad no la instale en una estantería ni estante para
libros, y tenga en cuenta lo siguiente:

- No toque la parte superior de la caja durante el funcionamiento.

- No tape las ranuras en la caja durante el funcionamiento

- No ponga objetos debajo de la unidad.

- No tape las ranuras de ventilación de la parte superior de la unidad.
No ponga nada a menos de 1 metro por encima del panel superior.

- Deje un espacio de unos 0,2 metro alrededor de la unidad.

Dansk

Anbring ikke apparatet i et rack eller en boghylde, da dette kan bloke
luftcirkulationen omkring apparatet. Iagttag ligeledes følgende:

- Berør ikke oversiden af kabinettet under anvendelsen.

- Bloker ikke åbningerne i kabinettet under anvendelsen.

- Stik ikke genstande ind under apparatet.

- Bloker ikke ventilationsåbningerne ovenpå apparatet.
Anbring ikke noget nærmere end 1 m over apparatets overside,

- Sørg for, at der er et frit område på omkring 0,2 m omkring apparatet.

ii

SPEAKER IMPEDANCE

FRONT A OROR B,B,

CENTER,

SURROUND,

SURR. BACK

: 6

-

16 OHMS

FRONT A

AND BB

: 12

-

16 OHMS

a s d f g h j kl ¡0 ¡1 ¡2 ¡3

⁄8

v

n

ON

LEARNING REMOTE

CONTROL RC

ENT

7200SR

POWER

SOURCE

ON /OFF

MACRO

OFF

MODE

OUT

RL

MULTI
ROOM

OUT

CDR
/ MD

CTRL

1

OUT

CTRL

2

OUT

VCR1

OUT

/

DSS
VCR2

MULTI

REMOTE

IN

AUDIO

MULTI

CD

ROOM

CDR
/

MD

TAPE

TAPE
OUT

VCR1

DSS /
VCR2

TV

DVD

OUT

MONITOR

VCR1
OUT

/

DSS
VCR2
OUT

VCR1

DSS

/

VCR2

TV

DVD

IN

IN

S - VIDEO

VIDEO

¡9 ™0 ™1 ™2 ™3 ™4 ™5

-

5 IN

-

4 IN

-

3 IN

-

2 IN

-

1 IN

IN

REMOTE CONTROL

RL

RL

OUT

DIGITAL
IN / OUT

RL

PRE
OUT

ANTENNA

CENTER

AM

SUB
WOOFER

GND

CENTER

FM

(75Ω)

7CH

INPUT

FRONT

DIG

SURR.

DIG

SURR.
CENTER

DIG

SUB
WOOFER

DIG.OUT COAX

SURR.
CENTER

DIG

SURR.

DIG

FRONT

DIG.OUT OPT

RL

¡4 ¡5 ¡6 ¡7 ¡8

Y

bC

/

/

MONITOR

DSS

COMPONENT

VIDEO

FRONT

rC

Y

SURROUND

rbCC

/

VCR2

Y

b

C

rC

DVD

MONI
TOR

VCR1
OUT

DSS
VCR2
OUT

VCR1

DSS
VCR2

TV

DVD

SPEAKER SYSTEMS

LR

FRONT

CENTERSURR.CENTER

A

SPEAKER SYSTEMS

SWITCHED
W MAX

AC OUTLET

(230V 50Hz)

LR

SPEAKER IMPEDANCE

FRONT A

CENTER,

SURROUND,

-

SURR. BACK

: 6

16 OHMS

-

FRONT A

AND

: 12

B

16 OHMS

c

z
x

b

m

ENT

Attenuate

Night mode

MULTI ROOM

NIGHT

ATT

DISPLAY OFF

Surround modeMulti room mode

DOLBY

PRO LOGIC

AUTO CIRCLE SURROUND DIRECT MEMORY PRESET SW LFE

DIGITAL
ANALOG

FM stereo

Tuned

Encoded channel status

Auto tuning mode

⁄0

Speaker system

RDS mode

MUTE

SLEEP

RCLRDSSTEREO

SRSCSLRTPTYAUTOTUNEDDSP SOUNDVIRTUALDIGITALDTS

A

B

⁄2

⁄6
⁄5

CH

DSS

LD

CLEAR

AUTO

DSP

6

1

CD

MEMO

2

6-STEREO

7

TV

TUNER

OK

DVD

CD-R/MD

VCR

TAP E

GUIDE

DTS

CS5.1

3

4

2CH OSD SLEEP

9

8

AUX

AMP

VOL

.

Display off

Input indicator Memory

Direct mode

Preset channel

Sleep timer

Mute

,

MUTE

6.1

5

0

⁄3

⁄7

⁄4
⁄1

POWER ON/OFF

STANDBY

e

SURROUND

y

AV SURROUND RECEIVER SR7200

BSPEAKERSA

PHONES

!3

!4 !8!7!6!5

ui o !0!1

MULTI ROOM

NIGHT

ATT

DISPLAY OFF

TV CD

THX

PRO LOGIC

DOLBY

VIDEO SET
1 2 3 4 5 6

DIGITALDTS

RF AUTOLOCK CIRCLE SURROUND EX MPEG DIRECT MEMORY PRESET SW LFE

DIGITAL
ANALOG
MLP PCM

MEMORY

CLEAR

DVD

VCR1

A/D7CH INPUT

TUNING/PRESET

DSS/VCR2 AUX

S-DIRECT

CDR/MD

MUTE

SLEEP

F/P

SLEEP

TAPE

!2

r

VOLUME

RCLCTTPEONRDSSTEREOTAPE 2 MON
SRSCSLRTTAPTYAUTOTUNEDDSP SOUNDVIRTUAL

A

B

MODE

DIMMER

DOWN

MULTI ROOM

TUNER

AUX INPUT

S-VIDEO VIDEO L AUDIO R

UP

MUTE

MUTE

qw

t

!9 @0

iii

TABLE OF CONTENTS

FOREWORD .................................................................................................................................................................... 2

PRECAUTIONS ........................................................................................................................................................................................................ 2

INTRODUCTION.............................................................................................................................................................. 3

DESCRIPTION................................................................................................................................................................. 3

FEATURES ...................................................................................................................................................................... 3

FRONT PANEL FEATURES ............................................................................................................................................ 4

REAR PANEL CONNECTIONS ....................................................................................................................................... 5

REMOTE CONTROL UNIT RC7200SR........................................................................................................................... 8

OPERATION OF REMOTE CONTROL UNIT ........................................................................................................................................................... 8

SET-UP ............................................................................................................................................................................ 9

ON SCREEN DISPLAY MENU SYSTEM ................................................................................................................................................................. 9

OSD MAIN MENU .................................................................................................................................................................................................. 10

SYSTEM SETUP .................................................................................................................................................................................................... 10

SPEAKERS SETUP ............................................................................................................................................................................................... 11

SURROUND MODE ............................................................................................................................................................................................... 12

CHANNEL LEVEL CONTROL ................................................................................................................................................................................ 12

MULTI ROOM SETUP ............................................................................................................................................................................................ 12

BASIC OPERATION ...................................................................................................................................................... 13

LISTENING TO THE TUNER .................................................................................................................................................................................. 13

RDS OPERATION .................................................................................................................................................................................................. 14

PLAYBACK OPERATION ....................................................................................................................................................................................... 15

OTHER FUNCTIONS..................................................................................................................................................... 15

SETTING THE SLEEP TIMER ............................................................................................................................................................................... 15

TV AUTO ON/OFF FUNCTION .............................................................................................................................................................................. 15

MULTI ROOM SELECTOR ..................................................................................................................................................................................... 16

ON SCREEN DISPLAY INFOMATION .......................................................................................................................... 16

REMOTE CONTROL UNIT RC7200SR......................................................................................................................... 18

MAIN FEATURES & FUNCTIONS .......................................................................................................................................................................... 18

NAMES OF PARTS & FUNCTIONS....................................................................................................................................................................... 18

BASIC OPERATION ............................................................................................................................................................................................... 20

OTHER FUNCTIONS ............................................................................................................................................................................................. 26

BATTERY LIFE ....................................................................................................................................................................................................... 26

NUMBER OF LEARNABLE CODES ...................................................................................................................................................................... 26

JOG DIAL COMMAND FUNCTIONS LISTING ...................................................................................................................................................... 27

SURROUND MODES .................................................................................................................................................... 28

TROUBLE SHOOTING.................................................................................................................................................. 30

ENGLISH

1

ENGLISH

FOREWORD

This section must be read before any connection is made to the mains
supply.

PRECAUTIONS

The following precautions should be taken when operating the
equipment.

WARNINGS

Do not expose the equipment to rain or moisture.
Do not remove the cover from the equipment.
Do not push anything inside the equipment through the ventilation
holes.
Do not handle the mains lead with wet hands.

EQUIPMENT MAINS WORKING SETTING

Your Marantz product has been prepared to comply with the
household power and safety requirements that exist in your area.
SR7200 can be powered by 230 V AC only.

IMPORTANT: (FOR UK VERSION)

This apparatus is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fix new fuse which should be a BS1362 13A, A.S.T.A. or BSI
approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut
off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 13A. If a
plug without a fuse is used, the fuse at the distribution board should
not be greater than 5A.

Note:

The severed plug must be destroyed to avoid a possible shock
hazard should it be inserted into a 13A socket elsewhere.

GENERAL PRECAUTIONS

When siting the equipment ensure that:

— the ventilation holes are not covered;
— air is allowed to circulate freely around the equipment
— it is on a vibration free-surface;
— it will not be exposed to interference from an external source;
— it will not be exposed to excessive heat, cold, moisture or dust;
— it will not be exposed to direct sunlight;

— it will not be exposed to electrostatic discharges
Never place heavy objects on the equipment.
If a foreign body or water does enter the equipment, contact your
nearest dealer or service centre.
Do not pull out the plug by pulling on the mains lead, hold the plug.
It is advisable when leaving the house, or during a thunderstorm, to
disconnect the equipment from the mains supply.

PRECAUTIONS IN CONNECTION

• Be sure to unplug the power cable from the AC outlet or turn off the

POWER switch before proceeding with any connection.

• Connect one cable at a time observing the “input” and “output”.

This will avoid any cross connection between channels and signal
inputs and outputs.

• Insert the plugs securely. Incomplete connection may result in

noise.

• Prior to connecting other audio and video equipment to the SR7200,

please read their owner’s manuals.

HOW TO CONNECT A PLUG

The wires in the mains lead are coloured in accordance with the
following code:
BLUE—“NEUTRAL” (“N”)
BROWN—“LIVE” (“L”)

1. The BLUE wire must be connected to the terminal which is
marked with the letter “N” or coloured BLACK.

2. The BROWN wire must be connected to the terminal which is
marked with the letter “L” or coloured RED.

3. Do not connect either wires to the earth terminal in the plug which
is marked by the letter “E” or by the safety earth symbol or
coloured green or green-and-yellow.

Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead — not simply over the two wires.

COPYRIGHT

Recording and playback of any material may require consent. For
further information refer to the following:

— Copyright Act 1956
— Dramatic and Musical Performers Act 1958
— Performers Protection Acts 1963 and 1972
— any subsequent statutory enactments and orders

ABOUT THIS USER GUIDE

Refer to the figures on page iii of this user guide. The numbers on the
figures correspond to those in the text. All references to the
connections and controls that are printed in BOLD type are as they
appear on the unit.

INSTALLATION

If this unit or another electronic device incorporating a microcomputer
is used at the same time with the tuner or television, picture
disturbance or noise may occur. In such a case, install the unit
according to the following guide points.

• Separate the unit as far as possible from the television.

• Place the antenna wire for the tuner or TV apart from the power
cable and audio and video connection cables of this unit.

• Since the phenomenon is likely to occur when using an indoor
antenna and/or 300-ohm feeder wire, we recommend using an
outdoor antenna and 75-ohm coaxial cable.

2

INTRODUCTION

Thank you for purchasing the Marantz SR7200 DTS/Dolby Digital
Surround receiver.
This remarkable component has been engineered to provide you with
many years of home theater enjoyment.
Please take a few minutes to read this manual thoroughly before you
connect and operate the SR7200.
As there are a number of connection and configurations options, you
are encouraged to discuss your own particular home theater setup
with your Marantz A/V specialist dealer.

DESCRIPTION

DTS was introduced in 1994 to provide 5.1 channels of discrete digital
audio into home theater systems.
DTS brings you premium quality, discrete multi-channel digital sound
to both movies and music.
DTS is a multi-channel sound system designed to create full range
digital sound reproduction.
The no compromise DTS digital process sets the standard of quality
for cinema sound by delivering an exact copy of the studio master
recordings to neighborhood and home theaters.
Now, every moviegoer can hear the sound exactly as the moviemaker
intended.
DTS can be enjoyed in the home for either movies or music on DVD’s,
LD’s, and CD’s.

FEATURES

• Dolby Digital and DTS surround sound decoding, plus Dolby Pro
LogicII decoding, Circle Surround and a variety of additional
surround modes.

• 6.1 mode reproduces the original 6.1 channel soundfield by
extracting the surround back signal from surround left and surround
right channels.

• 192 kHz/ 24 bit decoding for highest possible fidelity and bandwidth,
and high-resolution playback of 192 kHz/ 24 bit PCM audio sources.

• 110 watts to each of the six main channels; the power amp section
features advanced, premium high-storage power supply capacitors,
and fully discrete output stages housed in cast aluminum heat sinks.

• 6.1 channel pre-amp outputs for connection to external components
such as a subwoofer and external power amplifiers.

• Seven-channel direct inputs accommodate future surround sound
formats or an external digital decoder.

• 5 Digital inputs, for connection to other sources, such as DVD, DSS,
CD, CD-R or MD.

• 2 Digital outputs for connection to CD-R or MD.

• High-quality AM (MW/LW) /FM tuner with 30 station presets.

• Source Direct switch bypasses, tone controls and bass management
for purest audio quality.

• S-video and composite video switching .

• On- Screen- Display with both Composite and “S” video.

• Front panel A/V inputs, with S-video .

• Easy to use, on-screen menu.

• Multi-room capability offers independent control of a second room
audio and video system.

• Supplied with RC7200SR Programmable Learning Remote Control.

• Radio Data System (RDS) provides information on FM broadcasts.

ENGLISH

]

Dolby Digital lets you enjoy Digital TV, Digital Satellite as well as DVD, LD
software in digital surround, which is the next step above Dolby Pro Logic.
In Comparison with Dolby Pro Logic, Dolby Digital can provide
separate left surround and right surround channels, for more precise
localization of sound and a more convincing, realistic ambience.
And, with Dolby Digital all five main channels can be full ranged and a
subwoofer can be added to each channel, if desired.
By providing up to 5.1 channels of digital audio independently. Dolby
Digital lets you enjoy better sound quality and more powerful presence
than conventional Dolby Surround.

Pro Logic II, the next generation in Dolby Surround Pro Logic
technology, brings the excitement of surround sound to any existing
stereo mix, while making existing Dolby Surround mixes sound more
like discrete 5.1-channel surround sound. It works with CDs, VHS
tapes and TV shows, and MP3 files and radio broadcasts-converting
all of these source to surround sound, without the artifacts by other
matrix-decoding technologies.

Circle Surround is backward compatible, such that surround playback
is possible from any stereo or passive matrix-encoded material.
Five full-bandwidth, discrete channels of information can be extracted
from an enormous library of material not multi-channel encoded.
These sources include many of today’s DVDs and laser discs, as well
as most all video tape, VCD, Compact Disc, radio and television
broadcast material.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of
Dolby Laboratories.

“DTS”, “ES” and “DTS Digital Surround” are trademarks of Digital
Theater Systems, Inc.

Circle Surround and the symbol are trademarks of SRS Labs, Inc.
Circle Surround technology is incorporated under license from SRS

Labs, Inc.

3

ENGLISH

FRONT PANEL FEATURES (SEE
PAGE iii.)

q POWER switch and STANDBY indicator

Press the button to turn the power ON, and press again to turn it OFF.
If the POWER switch is in the ON position, the power of this unit can
be turned ON/OFF by pressing the POWER button on the remote
control unit.
When this unit is in the standby mode with the POWER switch set to
the ON position, pressing one of the FUNCTION SELECTOR buttons
also allows to turn the power on.
The STANDBY indicator lights up when this unit is the standby mode
(power OFF) by the remote control unit.

w PHONES jack for stereo headphones

Conventional dynamic headphones can be plugged in here.

Notes:

When using headphones, turn off the speakers system A and B
with SPEAKERS buttons. The surround mode is switched auto­matically to STEREO.

i S. ( Source) DIRECT button

When this button is pressed, the tone control circuit is bypassed as
well as Bass Management.

Notes:

The surround mode is automatically switched to AUTO when the
source direct function is turned on.
Additionally, Speaker Configurations are fixed automatically as follow.
Front SPKR = Large
Center SPKR = Large
Surround SPKR = Large
Surround Center SPKR = Yes
Sub woofer = Yes

o SLEEP button

Set the sleep timer function with this button .

!0 DIMMER button

When this button is pressed once, the display is dimmed.
When this button is pressed twice, the display is turned off and
“DISPLAY OFF” indicator lights up.
Press this button again to turn the display ON again.

e SURROUND MODE Selector knob

When this knob is turned, the surround mode is switched in the
following sequence.

AUTO

DTS

DOLBY PL II

MOVIE

DOLBY PL II

MUSIC

Note:

Not all modes will be present if an analog input is selected.

DOLBY

PRO LOGIC

6CH STEREO MATRIXSTEREO

6.1CH

SURROUND

VIRTUAL

CS 5.1

STADIUM

HALL

MOVIE

r VOLUME control knob

Adjusts the overall sound level. Turning the control clockwise
increases the sound level.

t FUNCTION SELECTOR buttons (AUDIO/

VIDEO)

These buttons are used to select the sources.
The video function selector, such as TV, DVD, VCR1, DSS/VCR2 and
AUX, selects video and audio simultaneously.
Audio function sources such as CD, TAPE, CD-R/MD and TUNER
may be selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound from one source with
a picture from another.
Choose the video source first, and then choose a different audio
source to activate this function.

y 7CH INPUT button

Press this button to select the output of an external multi channel decoder.

u A/D (Analog/Digital) SELECTOR button

This is used to select between the analog and digital inputs.

Note:

This button is not used for an input source that is not connected to
a digital input.

!1 MULTI (Multi Room) button

Press this button to switch the unit to multi room mode. “MULTI
ROOM” indicator lights up.

!2 MUTE button

Press this button to mute the output to the speakers. Press it again to
return to the previous volume level.

!3 CLEAR button

Press this button to cancel the station memory setting mode or preset
scan tuning.

!4 MEMORY button

Press this button to enter the tuner preset memory numbers and
station names.

!5 TUNING / PRESET UP and DOWN buttons

During reception of AM (MW/LW) or FM, you can scan the other
frequencies or select another preset station pressing these buttons.

!6 FREQUENCY / PRESET button

During reception of AM (MW/LW) or FM, you can change the function
of the UP/DOWN buttons for scanning frequencies or selecting preset
stations by pressing this button.

!7 FM MODE button

Press this button to select the auto stereo mode or mono mode when
the FM band is selected. The AUTO indicator lights in the auto stereo
mode.

!8 INFRARED SENSOR window

This window receives infrared signals from the remote control unit.

!9 SPEAKERS buttons

Press these buttons to select speakers systems A and/or B.

@0 AUX input jacks

These auxiliary video/audio input jacks accept the connection of a
camcorder, portable VCR, etc.

4

REAR PANEL CONNECTIONS
(SEE PAGE iii.)

All connections to the rear panel should be made with the entire
system powered off.
To avoid errors, it is advisable to connect one cable at a time between
the various components.

a FM antenna terminal (75 ohms)

Connect an external FM antenna with a coaxial cable, or a cable
network FM source.

AM antenna and ground terminals

Connect the supplied AM loop antenna. Use the terminals marked
“AM” and “GND”.
The supplied AM loop antenna will provide good AM reception in most
areas.
Position the loop antenna until you hear the best reception.

s PRE OUT jacks

Jacks for Front - L/R, Center,Surround and Surround center.
Use these jacks for connection to an external power amplifier.

d SUB WOOFER output jack

Connect to the input jack(s) of the power amplifier for subwoofer
channel or powered subwoofer.

¡1 COMPONENT VIDEO outputs

Connect to these outputs to the component video inputs of a video
projector or monitor. When a source connected to one of the two
component video inputs is selected the signal will be sent to these
jacks.

¡2 SPEAKER SYSTEMS A terminals

FRONT Left & Right speakers output terminals

Connect to the front left & right speakers.

CENTER speaker output terminals

Connect to the center speaker.

SURROUND Left & Right speakers output terminals

Connect to the surround (rear) left & right speakers.

SURROUND Center speakers output terminals

Connect to the surround center speakers.

¡3 SPEAKER SYSTEMS B terminals

FRONT Left & Right speakers output terminals

Connect to the front left & right speakers.

Notes:

When you use the speaker systems A and B simultaneously, the
connected speakers which are impeadance 12 to 16 ohms must be
used.

¡4 7 CH INPUT jacks

Connect to the outputs of an external multichannel decoder.

ENGLISH

f DC control output 1 & 2

Connect a device that needs to be triggered by DC under certain
conditions (screen, power strip, etc…) Use the system setup menu (3/

3) to determine the conditions by which these jacks will be active.

Note:

This output voltage is for (status) control only, It is not sufficient for
drive capability.

g MULTI OUT jacks (Audio)

Connect to the input jacks of the amplifier used to drive the speakers
in another room (Second zone).

h Analog audio outputs for audio source

equipment

TAPE and CD-R/MD

Connect each output to the audio inputs (REC in) of your recording
equipment.

j Analog audio inputs

CD, TAPE, and CD-R/MD

Connect the audio outputs of your source components to the input
jacks on the receiver.

k Video outputs

VCR1, and DSS/VCR2

Connect each output to the video input (REC in) of your video
recording equipment.

l MULTI OUT jack (Video)

Connect to the input jack of the TV monitor in another room (Second
zone).

¡0

TV MONI. (VIDEO/S-VIDEO) output jacks

Connect the TV MONI jack to your TV’s video input (VIDEO IN) jack.
You can connect your video equipment with S-VIDEO jacks if
possible, or the composite VIDEO jacks.
You must use the same type of connection from your video player into
the receiver, and out of the receiver into your TV.
Both must be composite video or both must be S-Video. You cannot
convert a signal from one type to the other.
When you connect to S-video connections, there will be no signal
output from the composite video jacks.

¡5 DIGITAL outputs

Optical and Coaxial

Connect digital input of your digital recording equipment.

¡6 DIGITAL inputs

Dig.1,2 (Optical) and Dig. 3, 4, 5 (Coaxial)

Connect each input to the digital output of your source equipment.
Use the system setup menu to assign digital input to appropriate
source. (see page. 10)

Note :

The coaxial connections are not for AC-3 RF from the LD player, If
you want to decode this type of signal, an external demodulator
must be used.

¡7 REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with remote control (RC-

5) terminals.

¡8 MULTI ROOM REMOTE I/O terminals

IN : Connect to multi-room remote control device, available from

your Marantz dealer.

OUT : Connect to the Marantz component equipped with remote

control (RC-5) terminals in another room (Second zone).

¡9 Analog audio outputs for video source

equipment

VCR1, and DSS/VCR2

Connect each output to the audio inputs (REC in) of your video
recording equipment.

™0 Analog audio inputs for video source

equipment

TV, DVD, VCR1, and DSS/VCR2

Connect each input to the audio outputs of your video source
equipment.

5

™1 Video inputs

ENGLISH

Ex: TV, DVD, VCR1, and DSS/VCR2

Connect each input to the video outputs of your video source
equipment.

™2 S-video inputs

Ex: TV,DVD, VCR1,and DSS/VCR2

Connect each input to the S-video outputs of your video source
equipment.

™3 COMPONENT VIDEO inputs

Ex: DVD,and DSS/VCR2

Connect to the Y/Cr/Cb component video outputs of each your video
product to these jacks.

™4 AC OUTLET

Connect the power cables of components such as a DVD or CD player
to this outlet.
This provides power only when the SR7200 is turned on and is useful
for components which you use every time you play your system.

Caution:

In order to avoid potential turn-off thumps, anything plugged in
here should be powered up BEFORE the SR7200 is turned on.

™5 Power cable

Connect to AC power outlet.
SR7200 can be powered by 230V AC only.

6

SPEAKER IMPEDANCE

FRONT A

OR B,

CENTER,

SURR. BACK : 6

-

16 OHMS

FRONT A AND B : 12

REMOTE CONTROL BUS CONNECTIONS

This unit is equipped with a remote control function.
By connecting this unit’s remote control jacks to a Marantz CD player
or tape deck equipped with remote control (RC-5) jacks, it allows
system remote control to operate.
Connect REMOTE CONTROL OUT jack of SR7200 to REMOTE
CONT. IN of other Marantz equipment, i.e. CD player or tape deck, by
using an RCA pin cable.

Note:

If a component equipped with remote control (RC-5) jacks has an
INT/EXT switch on the rear panel, set the switch to EXT when using
the system control function.

(Connection example)

ENGLISH

SR7200 rear panel CD player rear panel Tape deck rear panel

MULTI

IN

REMOTE CONTROL

REMOTE

OUT

REMOTE

IN

OUT

CONT.

REMOTE

IN

OUT

CONT.

CONNECTION FOR A SUBWOOFER

PRE
OUT

ANTENNA

CENTER

AM

SUB
WOOFER

GND

CENTER

FM

(75Ω)

7CH

Use this connection when using
a sub-woofer speaker.
You can also connect a powered
subwoofer.

INPUT

RL

CD

CDR
/

MD

TAPE

TAPE
OUT

VCR1

DSS

AUDIO

/

VCR2

TV

DVD

IN

/

IN

REMOTE CONTROL

RL

MULTI
ROOM

OUT

CDR
/ MD

CTRL

1

OUT

CTRL

2

OUT

RL

VCR1

OUT

DSS
VCR2

MULTI

REMOTE

OUT

DIGITAL
IN / OUT

RL

FRONT

DIG

-

5 IN

SURR.

-

4 IN

DIG

SURR.
CENTER

DIG

-

3 IN

SUB
WOOFER

DIG.OUT COAX

SURR.
CENTER

DIG

-

2 IN

SURR.

-

1 IN

DIG

FRONT

DIG.OUT OPT

RL

Powered subwoofer

LINE IN

Subwoofer speaker

REMOTE CONT.

IN

INPUT

INVERT

OUT

EXT.CONT.IN

+

-

SPEAKER SYSTEM

8 OHMS

OUTPUT

VIDEO/
5-13VDC

Marantz MA6100
power amplifier

Other Marantz
Equipment (RC-5)

Controlling the power ON/OFF of a power amplifier connected to
the SR7200 through Marantz remote control

1. Now the MA6100 can be turned ON / OFF in synchronism with the

power ON / OFF of the SR7200.

Notes:

n Be sure to connect the remote control bus before the procedure

above.

7

ENGLISH

REMOTE CONTROL UNIT RC7200SR

This chapter describes the functions which need to control the
SR7200. See page 18 and following pages to refer other function of
the RC7200SR.

c POWER ON and OFF

These two buttons are use for turning on or off SR7200.

b LCD

Used to display information about currently selected modes and
functions.

n Jog Dial control

Rotate this dial to select commands displayed on the LCD for each
function. (see page 27)
Refer to follow.

Function
AMP 1 A/D switches analog/digital input

TUNER 1 FM FM band

The marked “⊗” commands are not used for SR7200.

Jog Dial command

2 ATT switches attenuator for analog input
3 NIGHT selects NIGHT mode for Dolby Digital
4 MR-ON turns multi-room mode on
5 MR-OF turns multi-room mode off
6 7-DIR activates 7-channel input
7 TRB+ increases treble
8 TRB- decreases treble
9 BAS+ increases bass
0 BAS- decreases bass

2 AM AM/MW band
3 LW Long Wave band
4 T-MOD mono/stereo mode selector
5 SCAN programmed preset channel scan

⊗

6 STM selects station mode
7 F-DIR inputs a frequency directly
8 PTY selects PTY function
9 DISP selects display function

⊗

0 DWR selects DSR wave range

Note

OPERATION OF REMOTE CONTROL UNIT

1. Remote control

The distance between the transmitter of the remote control unit and the
IR SENSOR of the SR7200 should be less than about 5 meters. If the
transmitter is pointed to a direction other than the IR SENSOR or if
there is an obstacle between them, remote control may not be possible.

Remote-controllable range

SR7200

Approx. 5 m

60°

Remote control unit (RC7200SR)

2. Loading batteries

The life of the batteries used with the remote control unit is about 4
months with normal use. Also be sure to replace batteries earlier when
you notice that they are getting weak.

(1) Remove the back cover.

m ENT buttons

Press this button to enter the selected command by the Jog Dial.

, FUNCTION buttons

Press one of these buttons twice within 2 seconds to select the input
function of SR7200.
Press one of these buttons once to change the state of remote
commander.

. VOLUME up / down buttons

These buttons are used to raise and lower the SR7200’s volume level.

⁄0 CURSOR buttons

The cursor buttons can be used to navigate within on-screen menus of
SR7200.

⁄2 Channel up / down buttons

Used to controls the up/down function of tuner, or allows one to cycle
through the tuner presets.

⁄3 MUTE button

This button can be used to mute the sound temporarily.

⁄5 CLEAR button

This button is used to cancel certain memory or programming
operations.

⁄6 MEMO button

This button is used to enter the tuner preset memory numbers and
station names.

(2) Insert the new batteries (AA type) with correct (+) and (–)

polarity.

(3) Close until it clicks.

⁄7 TEN KEYPAD

They are useful for tuning a pre-set radio station and setting a station
name.

8