Mapmyindia TrailBlazer 2 User Manual

Please read this manual carefully before operating your navigation device. Retain it for
future reference. Operation of our device is very easy, simply you press the button or
touch the screen.

What is GPS?

The Global Positioning System (GPS) is a satellite-based navigation system made up of
a network of 24 satellites placed into orbit by the U.S. Department of Defense. GPS was
originally intended for military applications, but in the 1980s, the government made the
system available for civilian use. GPS works in any weather conditions, anywhere in the
world, 24 hours a day. There are no subscription fees or setup charges to use GPS.

Safety is the most important, the followings you must
comply with:

1.Always operate the vehicle in a safe manner. Do not become distracted by the
navigation while driving, and always be fully aware of all driving condition. Minimize the
amount of time spent viewing the screen of the navigation while driving and use voice
prompts when possible. Do not enter destinations, change settings, or access any
functions requiring prolonged use of the unit'controls while driving. Pull over in a safe
place before attempting such operations.

2.Do not kink or crease the power cable or place heavy objects on the power cable. Fire
can result from damaged power cables.

3. Immediately power off the player and unplug the AC adapter if smoke or odors emit
from the player or adapter.

4. Note that malfunctions may occur if you use the product in places where static
electricity occurs frequently.

5. Never attempt to open and repair the product yourself.

6. Please use the battery that the machine provided , or the product maybe
Damaged

1

7. Do not use for many hours at extremely low or high temperature.

8.If the product emits an unusual order or excessive heat, or you notice anything else that
seems unusual, do not use the product .

9.when you install the mount, fixed well the machine to motorcycle handlebars, to
avoided the machine fall down and damaged

10. When attaching a navigation holder to car, remove impurities on the surface before attaching,
and press suction cup lever to avoid falling.

11. Please power-down before moving the product

12. When you install the machine to the backup, please make sure there is no water on
the power contact, so as not to damage the machine.

13. Please put the power line in a suitable place to avoid any accident when you are
driving.

14.Please obey the practical traffic regulations. Voice guidance and map route may differ
from the actual traffic condition.

Accessories:

GPS--------------------1 Stylus Pen----------------1 Power Cable----------2

Mount------------------2 Nuts----------------------8 Battery----------------1

Cradle------------------2 USB Cable-------------- 1

2

Name of the components：

Host GPS Device:

a. Power Key: Power on/off
b. Display Screen
c. MINI USB Port: 1.Exchange the data with PC by MINI USB Cable.

2.Charge the GPS device by connecting AC adaptor or car charger
a. Reset: Press this key to reset the system
b. Speaker
c. External Power supply: Connected with outside power supply like GPS

storage battery.

d. Micro SD card Slot:

Connecting devices（Motorcycle）

A) To install an external power cradle and mount

1. Rotating the fixed knob, rotated the mount to the shape as illustrated.

3

2. Take 4pcs screws &4pcs nuts out from the bag.

3. In accordance with the direction of the arrow shown, put the nut into the screw of the
external power
The direction shown by the arrow. Put the screw into the screw jack of the fixed-disk
mount
Finally fixed the external power backup & mount with a screwdriver

Note: The top of the stylus can be used as a screwdriver.

B) Install the machine to the external power backup

1. Install the machine to the cradle as shown .

2. And then rotated the screw according to

4

L direction, until it is fixed with machine

C) Install the mount to the motorbike handlebar

1. Place the mount in proper position.

2. And then take it off from the U-shape mount

3. As shown, At last fixed U-shape mount & handlebar with screws

Note: when the user install, need to consider the location of installation to make
sure safety, also need pay attention & take on the duty by yourself

D) Connected the external power backup with the external power device

1. Connected the power line of the backup with the external device

2. Tighten the waterproof ring according to picture shown

E) Connected the external devices with the power of motorcycle.

1. Connected the end line of the external devices with the motorbike's power

Note: when the user connected the power, please consider the right position, it is
the best if the relevant techniques can help you, because of you personal fault,
you should take the responsibility for yourself.

5

Connecting devices（CAR）

Power Supply

The device has three ways of power supply: battery supply , AC Adapter and car adapter
(1)Lithium battery
When the device doesn't connect with the adaptor, it is supplied by the lithium battery.
(2)AC adapter (usually optional)
When the device connects with the adaptor, it is supplied by the outer power supply.
Tips: Under normal condition(volume and backlight at 50%),it can last about 2 hours After
the battery is fully changed. Some functions need to consume a lot of battery energy,
Such as music/video playing, height backlight, which may reduce the using time.

End line of the external power

6