GPS Portable
Navigation Device
Lx340
User Manual
Please read this manual before you start using this de
this
for purchasing our product.. When you use
supposed to learn well of this
product.
device, you are
vice
Thanks
The information in this manual has been verified for its
no liability will be applied for the correctness of mapping
navigation, technical and/or editorial interpretation or
the printing and translation of this manual, nor liable for
consequence or incidental damages caused by using this
accuracy.
data of
illustration,
any
manual.
But
or
This device is a complicated technical product consisting of OS
Navigation software. The manufacturers have paid suf ficient
attention to and f ulfill its duty in its hardware manufacture
processing and
to ensure the device work properly. If there is any malfunction or
defective of the device, the manufacturer will provide a warranty for the
congenital
property,
device.
in
development and/or application of the software so as
quality problem, but not covering for any loss or damage of
or any consequence caused by or related to using
this
and
The navigation software and mapping data is provided by MapmyIndia.
Its copyright is protected by laws. A User can only
any copying or application of the software for
allowed.
use
other
purpose is not
on this device,
No explicit and/or implicit guarantee or assurance will be applicable
for the validity, integrity, correctness, accuracy
navigation used on this device, nor liability
and/or any consequence caused by or
data or software used on this
device.
related
CAUTION :Considering the hot weather conditions in India
summer, when car is parked which means AC in car is also not operative, the
Temperature inside in car easily goes above 55C.Keeping the device at
high temperature for prolong period of time may affect the device
battery. Hence it is strictly advisable to take the device along
such
conditions.
of
mapping data for
for
any loss, damage,
to defective mapping
with
and
it's
you in
such
especially during
General tips for GPS application
The following content is tips for GPS device application
operation. Please read it before starting use of the
so that you may make a better use of the
GPS device.
GPS
and
device,
While the GPS device is working, it receives signal from
positioning. The signal from satellite may not be received, or
weakened in room, nearby some big buildings, or under
bridges.
satellites
be
overhead
for
When the GPS device is receiving satellite signals, you will get signals
from different satellites when you are in different places,
"Satellite Path", a "Satellite Path" only covers a range
"Satellite Path" is defined at place A, then turn off the device and move
to another place beyond 300 KM away from A,
another "Satellite Path", At this moment, the
for satellite signal again. To track the new "Satellite Path", this
take quite a long time. To save time for this searching, you
"GPS Reset" button in menu of "GPS Testing" to clear
the
device
this
is called
of 300
KM. If a
device is under
needs to
search
will
may
click
the previous
Path".
“Satellite
It will be difficult and taking more time to catch positioning
satellite during high speed driving. It is suggested to
positioning signal by stopping your car for a better and
signal
search the
safer effect.
from
While charging the device, please only use the travel charger or car
charger equipped by the manufacturer in its original
chargers may cause damage to this device, and
covered by our
warranty.
package.
this
damage is not
Other
Warnings:
Please install the device in a right way to avoid driver's sight and airbag
to be hindered. Any loss or damage of product,
property caused by mistakes of mounting or installing
be not covered within the warranty and not be the responsibility of the
manufacturer.
passengers,
of the
or other
device will
Please not put on earphone and operate the device when you
ride a bike to ensure your
safety.
drive
Please consult with airline crew for application of the device if you
want to use it during
flight.
Please keep the device far away from strong magnetic field
cause damage or malfunction to the
device.
which
may
or
Please protect the device from being dropped, shocked or scratched
on or by hard objects to avoid possible
device face, loose contact of the battery,
part broken) to the
device.
damages
data
(scratches on the
loss or other hardware
Please not use earphone with a continuous and large volume
time, set the volume at a moderate loudness and use it not
time to avoid possible damage to your ear
audibility.
for
for
a long
long
Please not use chemical solution or cleaner to clean the
avoid possible damage to the paint and polish of its
device
surface.
to
When the device is used as a mobile storage device, please
procedures of file management operation to copy or
warranty does not cover any mistake, or damage, or
transfer
loss of files
follow
files. The
It will be better for you to make a backup copy of your personal files in
the device into your PC or laptop in
time
It is prohibited to use higher voltage power supply, to bent or squeeze
the power cord with big force so as to avoid
overheat resulting in
fire
possible
damage and
right
Never use wet hands to pull out or plug in the power plug to avoid
possible electric
Not use the device in an environment over 60℃, or below -10℃, and
shock
with
high
humidity as well. Considering the hot weather conditions in
during summer, when car is parked which means AC in car is also not
the temperature inside in car easily goes above 55C.Keeping the device
high temperature for prolong period of time may affect the device and
battery. Hence it is strictly advisable to take the device along with
such
conditions.
India especially
you
The content of this manual is subject to definition, or
modification from time to time for improvement on features and
function without prior
notice.
interpretation,
or
operative,
at
it's
in
such
Table of Contents 1
1.0 Understanding Hardware
2.0 Illustrations on screen
2.1(Projector
2.2 Secondary UI (Projector
3.0
Multimedia……………………………………………………………………………............ 9
11
31
3.1 Flash
3.2 Video
3.3 Music
3.4 Button and control in Play
3.5 Exit from Music
4.0 Photo
5.0 GPS
6.0 System
6.1 Language
6.2 Backlight
6.3 Power
6.4 Sound
6.5 Time
6.6 System
6.7 Coordinates
7.0
8.0
9.0 eBook
10.1 Bookmark
10.2 Jump to the appointed
11.1 Charging
11.2 Charger
11.3 Power On/Off the
11.4 Sleeping & Power
11.5 Waking -up from the
Specifications
Trouble Shooting S
Playback............................................................................................................. 9
Playback............................................................................................................ 10
Playback………………………………………………………………………………. 11
Display…………………………………………………………………………….......12
Test…………………………………………………………………………………....... 13
Setting……………………………………………………………………………..... 14
Management………………………………………………………………………..... 16
Setting………………………………………………………………………………... 16
Setting…………………………………………………………………………………... 17
Resources…………………………………………………………………………… 17
USB…………………………………………………………………………………………… 18
Game………………………………………………………………………………………..…. 18
Reading………………………………………………………………………………. .19
Features…………………………………………………………. 7
display...................................................................................... 8
Screen)......................................................................................................... 8
Screen)................................................................................. 8
Mode…………………………………………………………... 12
play………………………………………………………………………… 12
Setting…………………………………………………………………………..... 15
setting……………………………………………………………………………... 15
Calibration……………………………………………………………………… 17
…………………………………………………………………………………... 19
page…………………………………………………………… …. 20
…………………………………………………………………………………… 20
Application…………………………………………………………………………. 21
device……………………………………………………………………. 21
off……………………………………………………………………….. 21
sleep mode…………………………………………………………… 22
32
teps
33
3
5
2
4
6
7
8
9
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Getting Started
1.0 Understanding Hardware F
Front
Components
Ref
Component
1) Touch
Back Componen
1
5
Ref
1 Headphone Connector Connects to stereo
2 Micro SD Slot Slot for SD
3 Mini USB Slot Connects To USB
4 Reset To Reset the
5 Speaker To play
ts
Component
eatures
Screen
1
Displays the output of
your
Description
device Tap the
Screen with your fingertip
to select menu
1
1
1
2
3
1
4
Description
card
Cable
device
audio
headphones
Top
Components
ON/OFF
Ref
1 On/Off Switch The main power/battery cut off sw
2.0 Illustrations on
System UI
2.1(Projector
Screen)*
Component
screen display:
Description
itc
h
Under this UI, click icon down the screen to enter the function
Then there will be Looped playback of cartoon, click it to entry
function. If you click the icons beside the function icon you can
cartoons. If you click the arrow up the corner you can turn
view, which accompanies the cartoon at the same
*The UI pic shown above may differ from actual UI pic
Secondary UI
2.2(Projector
Screen)
time.
page.
pages
this
enjoy
to
the
page.
to turn
the
corresponding
the page.
In this interface, click the icons on the screen to enter
functions; and click the arrow on the right bottom
will be an animation effect when turning the
3.0 Multimedia
3.1 Flash Pl
This is to play flash in your
Operation:
ayback
PND.
On system main menu, click the icon to entry the function of
player, click icon, to get into Flash playing
then file selection UI will be shown on
screen:
mode,
There
Media
on this UI, click button to search Flash files not in selected
click button to close this window and exit Flash palying
double click, or select then click button to open thie selected
folder;
mode;
file.
Control buttons in playing
:Play, in Pause or Stop mode, press this button to
:Pause, in Play mode, pressing this button to
:Stop, in Play mode, pressing this button to
:Fast Forward, in Play mode, pressing this button to get fast forward
:Fast Retreat, in Play mode, pressing this button to fast retreat once;
ull
Screen, pressing this button for full screen
:F
:Return, pressing this button to return back to system main menu from playing
:Sound Settings, Click the button to change into mute, in
status the sound icon will change to Click the mute icon to
back to its normal status and the sound icon will back
the same
In full screen, tool bar will be hidden at screen bottom,
you may get it by tapping on the screen.
time.
mode:
play;
pause;
stop;
once;
play;
mode;
which
to at
3.2 Video Pl
This feature is for video file playing, with the formats:
MPG, ASX, DAT,ASF and
Operation:
ayback
AVI,
MPEG,
WMV.
On system main menu, click the icon to entry the function of
player, click icon to enter into Video
application. Display of UI for file
selection:
Playback
Media
On this UI, click button to search video files not listed in the appointed
video file folder; Click button to close and exit from
application; Double click or select and click button
open and play this
file.
Video
to
Playback
UI and button
definition:
Play
Pause
Stop Full screen
Close
Play Progression, drag to a point to start
Volume tune, click anterior to set into
status, click it again to
In full screen display, the tool bar at screen bottom will be
hidden, you can slightly tap on screen to get it.
It will take a few minutes to search fies when video play
mode starts if this application has not been used for a
long time.
resume
Next
Previous
display
mute
3.3 Music Pl
This is for Music Playback with format of MP3, WMA,
Operation
ayback
：
WAV.
play
On system main menu, click the icon to entry the function of
player, click icon to play music. Screen
is shown as the illustration
On this UI, click button to search for music files not in
below:
Media
display
selected
folder; click button to close this window and exit music
double click, or select then click button to play this music
Music play mode is displayed as following
diagrams:
play
file.
mode;
3.4 Button and control in Play Mode:
In music play mode, click button to pause, then it becomes
Button ; At this time click button, music play mode will
return
again; click button to stop; click button to jump to
the
next
one, click button to jump to the previous
button to switch Repeat mode; click button to set mute, then
one; click
button will become , click again to
recover.
3.5 Exit from Music play
Click button at the upper right corner to
4.0 Photo
This is for Photo Display with format JPG stored in an SD card.
Operation:
Display
exit
Play
this
On system main menu, click icon to enter into Photo
function. Display of UI for file
Display
selection:
On this UI, click button to search photo files not listed in the
appointed photo file folder; click button to close current UI and
Photo Display function; double click or select then click button
or play this file. Display shown as the right
illustration:
exit
to open
Then, click or button to select previous or next photos;
or button to zoom in or zoom out photo; click button for
full
screen display. In full screen display, tap the screen again to
full screen display; click button to select display of
different
percentage. Click the button you can Ctrl-Shift-R or Ctrl-R
photo. is for selecting to set automatic or manual mode to
page of display.
Exit Photo
Click the button on upper right corner to
Display
exit.
5.0 GPS T
est
It is to check some data, such as the strength of receiving
the numbers of
Operating
In the system UI, click the icon to open GPS
It will display as
satellites.
method:
follows:
Testing.
click
the
turn
signal,
exit
and
All information in this interface are instant information. For
refer to those of the
reset:
GPS
device.
There will be different satellites in different places
details,
please
correspondingly
when the GPS navigation equipment is receiving the geosynchronous
satellite signal. This is called “Ephemeris”.
range of 300KM. When you have set
shut down the equipment to take
it
beyond 300KM, the equipment will
be in another ephemeris, and start searching for the satellite to
ascertain the ephemeris. This
button before searching would save much
may
cost a lot of time. Clicking
6.0 System Setting
This is for system setting to change default setting of the
your personal
Operation:
preference.
An
ephemeris covers a
the
“Ephemeris” in place A and
time.
system
"Reset"
to
On system main menu, click icon to enter into system
Screen display is shown as the illustration
below:
setting.
In system setting, there 9 items for setting, click directly each item to
change setting for it. Details will be described one by one below.
6.1 Language Setting
This is for setting of system language; screen display is shown as the
illustration
Click the icons of the corresponding language
this interface or choose the interface project, the
system will save the setup automatically
setup is closed, and return to the previous menu. (The system will
required to restart after the interface project is
6.2 Backlight
This is for changing backlight brightness of the device
and time to start screen saver when no operation on the device.
Screen display is shown as the illustration
below:
setting
in
when
the
be
changed.)
below:
screen
display,
Then, drag the slide block to set. Select No Screen Saver, then the screen
saver will be disabled. After setting, close the current window
to save.
6.3 Power
This is for setting auto power off and/or power saving mode, and
start power off and/or power saving when no operation on the
Management
time
to
device.
save.
feature.
After
In drag menu to select time, select “No” for disabling this
setting, close the current window to
6.4 Sound S
etting
This is for setting of beeping of power on, button operation on screen,
and total volume. After entering into this UI, screen
below:
the illustration
Click “Screen sound” in this interface to enable or disable the
screen operations, “Open TTS” is to enable the
clear
function. TTS speech engine gives a
function name every time you enter into
broadcasting of
a
display is
speech
shown as
sound
broadcasting
the
function. English and Chinese speeches are supported for the moment.
You can listen to the sound by clicking the start-up
the general volume can be adjusted by dragging
User-defined start-up
music
In the present interface, click "customize Sound" then its
below:
will show up, illustrated as
sound
directly; and
the slide directly.
dialog
window
of
"Nand Flash" is the inside memory of the device, "SDMMC" is the SD card.
So the start-up music can be selected from both of them.
the button to confirm, then back to the upper-level
Select one,click
interface.
6.5 Time Set
This is for setting time of the system. After entering into this
display is shown as the illustration
ting
UI,
screen
below:
On this UI, click button on the screen to set. After setting,
save.
current window to
close
the
6.6 System Resou
This is for checking system
rces
resources:
On this UI, click directly at the item on the right to
6.7 Coordinates
Calibration
This is for calibrating the stylus coordinates on touch screen.
entering into this UI, screen display is shown as the
check.
After
illustration below:
On this UI, use stylus to tap at the center of the cross, then
other crosses which will move after each tapping until
finish
tap
and
on
“Touch Screen Calibration Completed” is
7.0 USB
This is to set the mode when the USB interface of the device is connected
to the computer, in which “U disk” is to set the device as the portable
memory, and “ACTIVESYNC” is to use the device for
Pictures are shown as
below:
shown.
program
debug.
Click the desired connection mode and close the window to
mode.
chosen
save
the
8.0 G
ame
On system main menu, click icon to enter into
Screen display is shown as the illustration
Game.
below:
In this state, click the game icon on the screen to enter the game.
For details on how to play the game, see the
help
information
that
will be available after you enter the
9.0 eBook Reading
This if for eBook Reading with format .txt stored in an SD
Operation:
game.
card.
On system main menu, click button to enter into eBook
application. Display of UI for file
selection:
On this menu, click button to search for txt files not in
selected
folder; click button to close this window and exit file reading
double click button, or select then click button to open this
The screen display is shown as
follows:
Reading
mode;
file.
Click or button to turn page up or down; “Manual/Automatic” is
se
t
for selecting Manual or Automatic page turning; Font is
selecting letter size of
display.
10.1 Book
mark
This is for bookmark in reading a voluminous article,
jumping to the last time marked page, a humanized
convenience while
Operation:
reading.
design
In eBook Reading mode, click right button to enter into
setting, display of dialogueblock is shown as in the
illustration below:
for
marking
for
bookmark
or
Click button to set a bookmark for the current page.
selected bookmark stored in the dialogue block to
Directly
remove
click
this
bookmark; click button to jump to the bookmarked page. Click
button to exit bookmark setting and return back to eBook
mode.
Reading
10.2 Jump to the appointed page
This is for jumping to the appointed page when reading a voluminous
set.
article and no bookmark is
Operation: In eBook Reading mode, click right button to enter
into
Jump function, display of dialogue block is shown as in the illustration
ow:
bel
Click the number key on screen to input the page number to
when inputting, click button to backspace for deleting;
button to clear input block, after inputting page number
to jump to the page of selected
number.
11.0 Battery Status Icon:
Full=======================================>Drained
When the battery is at low power level, please charge it
immediately to ensure the device work normally.
11.1 Charging:
jump
to,
click
click button
Warnings
1. A new battery may be empty and not charged before you get the
2. To achieve the best performance of the battery, it is better
3. In normal charging with DC charger, please make sure to
A new battery will reach its best performance after a number
cycles of charging and discharging.
If the device is not used for long time, it is better to charge
it to full capacity every 2 or 3 months during storage.
If not using the device for a long time, it is wise to take out
the battery.
11.2 Charg
DC Charger:
Take out the DC charger, plug it into the wall outlet with
~240V), then plug in the DC jack into the device DC-in
illustration
for charging:
it up to 8 hours in the first three times, but not over
for 2 – 2.5 hours to get it fully
er Application:
below).
charged.
to
charge
16
hours.
charge
jack.(see
AC 220V(100V
the
device.
it
Car
Lighter Charger:
Please insert the car charger into car cigarette lighter jack,
into the USB jack(see the illustration
When you use car charger, please start car engine first, then
connect it to the device to avoid possible damage to the
device due to overloaded pulse current during ignition.
Please pull it out when you stop the engine, and plug it in
again after next ignition.
11.3 Power On/Off the d
In power off status, slide the power switch to "ON" position to
the device, then the OSD will be displayed on
11.4 Sleeping & Power off
In power-on mode, press the power button on the device for
then the sleeping mode or confirmation for power-off
below).
evice
screen.
screen
then
turn
3-5
will
plug
on
seconds
display
as
follows:
In this UI click the button will be in sleeping mode, click the button
will power off; click the button to exit the UI and back
normal
11.5 Waking -up from the
When in sleeping mode, a short press on the power-on button of the
device will wake up the
When in sleeping mode, all the procedure in operation
pause but will back to normal status after waking up.
operation.
CPU
Memory
Chip
Antenna
Memory Card
Screen
Type
sleeping
system.
Specifications
SiRF Atlas
2GB
GRF3i+
Built-in folded
Applicable for a Maximum up to 8GB SD
TFT Touch
to
will
V
antenna
Screen
card
Screen
Screen
Dot Matrix
Extension
Battery
Battery
Size
Color
Display
Slot
Type
Capacity
4.3
inch
65K
colors
480*272
SD
Removable Li-polymer
950mAh
batter
Trouble Shooting Steps
No. Fault
1
No power
2
Dead
3
Error in
4
Impossible
recharge
on
Unit
upgrade Dead or frozen
to
Possible
Battery drained (The
has no further display
blink when
on
The start interface
the screen for
Without
No display of the
display on screen is frozen
as any button
upgrade, display on
screen is
button
During charging, the
LED indicator of
has no light or no charging
sign displayed
screen
button.)
changing.
works.
.
Cause
screen
pressing power
stays on
long time
screen, or
is pressed.
during
the
frozen
and no
green
the device
on
the
after a
Solutions
Please refer to the
battery charging in
only use the
charge the
Take out the battery, then
back, start the device
Press and hold the
button for 5
Release it to power on.
Take out the battery, then put it
Back, start the device
This fault can only be fixed
the manufacturer.
for
repair.
If the charger is
Properly and
Charger is
Battery is damaged or
Charged.
It is normal when the
is lit on but the
not on the screen at
time during
enclosed
device.
seconds, then
connected
powered.
damaged.
charging
charging.
description of
this
manual,
charger to
put it
again.
power on
again.
by
Please return
full
green LED
sign is
the same
Loading...