Maplin A70QB User Manual

2500W Blade Heater

A70QB

The modern, stylish and compact design of this 2500W blade heater makes it ideal for
both the home and office. The control panel and handy remote allow you to set your
desired temperature and duration of operation. In addition, the oscillation function and
two power settings have the capability to heat a wider area than a conventional fan
heater.

Features:

• LED display shows time and temperature

• Oscillates for greater coverage

• Handy remote control included

• Timer can be set from 1 to 12 hours

• Temperature can be set from 15°C to 28°C

• Two Fan power settings, high and low

Contents:

• 1 x Blade heater

• 1 x Base

• 1 x Remote control

• 4 x Screws

• 1 x Instruction manual

Technical specification:

Model NO. DF-HT5A01P

Voltage 220-240V AC

Frequency 50Hz

Wind speed

≥1.6m/s
Power Low 1600W/High 2500W

Noise level.

≤50 dB
Dimension 320 x 1130 mm

Warning:

• Not suitable for use by children, keep out of reach unless under continuous
supervision

• Do not place heavy objects on the power cord. Do not operate this appliance
with a damaged cord or plug. If the power supply cord is damaged, it must be

replaced by a qualified electrician

• Do not immerse the cord, plug or any part of this appliance in water or any
other liquid. Do not handle with wet hands

• It is not recommended to use an extension cord with this product

• Do not let the mains lead hang over the edge of the table or work surface,

touch hot surfaces or rest against the front of the heater

• Do not misuse the cord or pull the cable to disconnect from the power outlet

• In order to avoid overheating, do not cover the heater or place anything on top

of it. Do not allow it to touch flammable material, including curtains, bedding etc

• The heater must not be located immediately below a socket-outlet

• Do not use this heater in dusty environments or where flammable or explosive

vapours are present (e.g. in a workshop or garage), do not use in the immediate
surroundings of a bath, shower or swimming pool

• Do not place this heater on or near to any other source of heat

• Do not hang wet clothes above the heater

• Ensure there is nothing obstructing the air inlet or outlet

• Some parts of this product can become very hot and cause burns. To avoid

burns, do not touch the hot surface with bare skin. Particular attention has to
be given where children, animals and vulnerable people are present

• This heater is not equipped with a device to control the room temperature

• Ensure this unit is switched off when the room is unoccupied. Disconnect from
the mains when not in use or cleaning. If unused for extended periods of time,

store in a dry and ventilated location

• For household use only, do not use outdoors or in direct sunshine

• Do not attempt to repair, disassemble or modify this appliance. There are no

user-serviceable parts inside

• Do not allow any foreign objects to enter the ventilation or exhaust openings as
this may cause an electric shock, fire or damage to the appliance

• Do not use this heater with a programmer, timer or any other device that
switches the heater on automatically

• When the heater is switched on for the first time, it may release a slight
harmless odor. This is normal and should not occur again. If there is an unusual

smell or sound from the device after this time, stop operating and unplug

• Do not use pesticides or other flammable spray around the product, as this will
damage the device

Assembly Instructions:

1. Remove all components from their packaging including the main unit, the base,
the remote control and the screws

2. Lay the main unit on its’ side

3. Connect the base to the main unit and secure with the four screws included

4. Stand the machine up and place on an even and stable surface