Windows Recovery CD (for non-embedded operating systems only)
COPYRIGHT NOTICE
This manual is a publication of Maple Systems, Inc., and is provided for use by its customers only. The
contents of the manual are copyrighted by Maple Systems, Inc.; reproduction in whole or in part, for use
other than in support of Maple Systems equipment, is prohibited without the specific written permission of
Maple Systems.
WARRANTY
Warranty Statements are included with each unit at the time of purchase and are available at
www.maplesystems.com.
TECHNICAL SUPPORT
This manual is designed to provide the necessary information for trouble-free installation and operation of
your new OMI. However, if you need assistance, please contact Maple Systems:
Carefully unpack the OMI6800. Check all material in the container against the packing list. Maple
Systems will not accept responsibility for shortages against the packing list unless notified within 30 days.
The equipment and accessories were inspected and tested by Maple Systems before shipment.
Examine the equipment carefully; if any shipping damage is evident, notify the carrier immediately. Maple
Systems is not responsible for claim negotiations with the carrier.
Save the shipping container and packing material in case the equipment needs to be stored, returned to
Maple Systems, or transported for any reason.
OMI Operations Manual: OMI6800 Series 4
OMI Operations Manual: OMI6800 Series 5
Warning: Disconnect this equipment from any power before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
Warning: Keep this equipment away from humidity.
Warning: Before applying power the unit make sure the voltage of the power
source is within the input voltage rating of the unit.
Warning: Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
Warning: Never open the equipment and do not operate equipment with its back
cover removed- there are dangerous high voltages present inside. For safety
reasons, the equipment should be opened only by a qualified service technician.
Warning: This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions manual, it
may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class A computing device pursuant to FCC Rules,
which are designed to provide reasonable protection against such interference
when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct the
interference.
Warning: If any of the following situations arise, get the equipment checked by
qualified service personnel.
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to this
operations manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
Warning: Do not leave this equipment in an uncontrolled environment where the
storage temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage
the equipment.
SAFETY PRECAUTIONS
Please observe the following precautions when installing the OMI6800 Series Open HMIs. Failure to
comply with these restrictions could result in loss of life, serious personal injury, or equipment damage.
OMI Operations Manual: OMI6800 Series 5
OMI Operations Manual: OMI6800 Series 6
Top View
Front View
Bottom View
Rear View
5.43
[138.0]
7.56
[192.0]
Side View
7.48
[190.0]
5.35
[136.0]
5.87
[149.0]
7.95”
[202.0]
IMPORTANT
Dimensions shown are
estimates, and may not work
with your mounting scheme. We
recommend measuring your
actual cutout dimensions for a
proper fit.
0.24
[6.0]
1.30
[33.0]
Cutout Dimensions
A
BBDF
Dimensions are in inches [mm]
E
DIMENSIONS AND SPECIFICATIONS
The following section contains the Dimensions and Specifications for the OMI6800 series Light Industrial
Panel PCs.
OMI6807A DIMENSIONS
OMI Operations Manual: OMI6800 Series 6
OMI Operations Manual: OMI6800 Series 7
System
CPU
Intel Celeron N2930 1.83 GHz Quad-Core processor
System Chipset
SoC
System Memory
Onboard DDR3L 4 GB 1600 MHz
I/O Ports
USB
2 x USB 3.0 type A
Serial
COM1: RS-232/422/485 DE-9P (default RS-232)
COM2: RS-232 DE-9P
Audio
1 x 3.5 mm line out
LAN
2 x GbE RJ-45
Power
3-pin connector header, DC power input
Remote Power Switch
2-pin connector header
Storage
Solid State Drive
Options*
32 GB SSD, 1 x 1.8” SATA 2, MLC
64 GB SSD, 1 x 1.8” SATA 2, MLC
128 GB SSD, 1 x 1.8” SATA 2, MLC
256 GB SSD, 1 x 1.8” SATA 2, MLC
SD Card Slot
1 x internal Secure Digital memory card socket, up to 32 GB
Specifications subject to change without notice.
* Additional SSD options available; contact Maple Systems for details.
** 32-bit or 64-bit must be specified at the time the order is placed.
OMI6807A SPECIFICATIONS
OMI Operations Manual: OMI6800 Series 7
OMI Operations Manual: OMI6800 Series 8
A
Power Connector
B
Com Port DE9PEthernet Port
D
USB 3.0 Ports
E
SW Connector
F
Line out
Top View
Front View
Bottom View
Rear View
6.58
[167.0]
8.74
[222.0]
Side View
8.66
[220.0]
6.50
[165.0]
6.94
[176.1]
9.10”
[231.1]
IMPORTANT
Dimensions shown are
estimates, and may not work
with your mounting scheme. We
recommend measuring your
actual cutout dimensions for a
proper fit.
0.28
[7.0]
1.70
[43.0]
Cutout Dimensions
A
BBDF
Dimensions are in inches [mm]
E
USB LAN 1COM 2COM 1LAN 2+ -Line-Out
OMI6808A DIMENSIONS
OMI Operations Manual: OMI6800 Series 8
OMI Operations Manual: OMI6800 Series 9
System
CPU
Intel Celeron N2930 1.83 GHz Quad-Core processor
System Chipset
SoC
System Memory
Onboard DDR3L 4 GB 1600 MHz
I/O Ports
USB
2 x USB 3.0 type A
Serial
COM1: RS-232/422/485 DE-9P (default RS-232)
COM2: RS-232 DE-9P
Audio
1 x 3.5 mm line out
LAN
2 x GbE RJ-45
Power
3-pin connector header, DC power input
Remote Power Switch
2-pin connector header
Storage
Solid State Drive
Options *
32 GB SSD, 1 x 1.8” SATA 2, MLC 64 GB SSD, 1 x 1.8” SATA 2, MLC 128 GB SSD, 1 x 1.8” SATA 2, MLC 256 GB SSD, 1 x 1.8” SATA 2, MLC
SD Card Slot
1 x internal Secure Digital memory card socket, up to 32 GB
Specifications subject to change without notice.
* Additional SSD options available; contact Maple Systems for details.
**32-bit or 64-bit must be specified at the time the order is placed.
OMI6808A SPECIFICATIONS
OMI Operations Manual: OMI6800 Series 9
OMI Operations Manual: OMI6800 Series 10
Top View
Front View
Bottom View
Rear View
6.93
[176.0]
10.71
[272.0]
Side View
10.63
[270.0]
6.85
[174.0]
7.44
[189.0]
11.22
[285.0]
IMPORTANT
Dimensions shown are
estimates, and may not work
with your mounting scheme. We
recommend measuring your
actual cutout dimensions for a
proper fit.
0.28
[7.0]
1.65
[41.9]
Cutout Dimensions
A
BBDE
Dimensions are in inches [mm]
F
OMI6810A DIMENSIONS
OMI Operations Manual: OMI6800 Series 10
OMI Operations Manual: OMI6800 Series 11
System
CPU
Intel Celeron N2930 1.83 GHz Quad-Core processor
System Chipset
SoC
System Memory
Onboard DDR3L 4 GB 1600 MHz
I/O Ports
USB
2 x USB 3.0 type A
Serial
COM1: RS-232/422/485 DE-9P (default RS-232)
COM2: RS-232 DE-9P
Audio
1 x 3.5 mm line out
LAN
2 x GbE RJ-45
Power
3-pin connector header, DC power input
Remote Power Switch
2-pin connector header
Storage
Solid State Drive
Options *
32 GB SSD, 1 x 2.5” SATA 2, MLC 64 GB SSD, 1 x 2.5” SATA 2, MLC 128 GB SSD, 1 x 2.5” SATA 2, MLC
256 GB SSD, 1 x 2.5” SATA 2, MLC
SD Card Slot
1 x internal Secure Digital memory card socket, up to 32 GB
Specifications subject to change without notice.
* Additional SSD options available; contact Maple Systems for details.
** 32-bit or 64-bit must be specified at the time the order is placed.
OMI6810A SPECIFICATIONS
OMI Operations Manual: OMI6800 Series 11
OMI Operations Manual: OMI6800 Series 12
Top View
Front View
Bottom View
Rear View
9.02
[229.0]
11.93
[303.0]
Side View
11.85
[301.0]
8.94
[227.0]
9.65
[245.0]
12.56
[319.0]
IMPORTANT
Dimensions shown are
estimates, and may not work
with your mounting scheme. We
recommend measuring your
actual cutout dimensions for a
proper fit.
0.33
[8.4]
1.70
[43.3]
Cutout Dimensions
BBDF
LAN 2CO M 1CO M 2LAN 1USB
A
Dimensions are in inches [mm]
Line-Out
SW
+
E
OMI6812A DIMENSIONS
OMI Operations Manual: OMI6800 Series 12
OMI Operations Manual: OMI6800 Series 13
System
CPU
Intel Celeron N2930 1.83 GHz Quad-Core processor
System Chipset
SoC
System Memory
Onboard DDR3L 4 GB 1600 MHz
I/O Ports
USB
2 x USB 3.0 type A
Serial
COM1: RS-232/422/485 DE-9P (default RS-232)
COM2: RS-232 DE-9P
Audio
1 x 3.5 mm line out
LAN
2 x GbE RJ-45
Power
3-pin connector header, DC power input
Remote Power Switch
2-pin connector header
Storage Space
Solid State Drive
Options *
32 GB SSD, 1 x 2.5” SATA 2, MLC 64 GB SSD, 1 x 2.5” SATA 2, MLC 128 GB SSD, 1 x 2.5” SATA 2, MLC 256 GB SSD, 1 x 2.5” SATA 2, MLC
SD Card Slot
1 x internal Secure Digital memory card socket, up to 32 GB
Specifications subject to change without notice.
* Additional SSD options available; contact Maple Systems for details.
** 32-bit or 64-bit must be specified at the time the order is placed.
OMI6812A SPECIFICATIONS
OMI Operations Manual: OMI6800 Series 13
OMI Operations Manual: OMI6800 Series 14
Top View
Front View
Bottom View
Rear View
11.50
[292.0]
15.43
[392.0]
Side View
15.36
[390.0]
12.20
[310.0]
16.14
[410.0]
IMPORTANT
Dimensions shown are
estimates, and may not work
with your mounting scheme. We
recommend measuring your
actual cutout dimensions for a
proper fit.
0.33
[8.4]
Cutout Dimensions
LAN 2
CO M 1 CO M 2
LAN 1
USB
BDEB
A
Line-Out
SW
+
F
Dimensions are in inches [mm]
11.42
[290.0]
1.82
[46.3]
OMI6815A DIMENSIONS
OMI Operations Manual: OMI6800 Series 14
OMI Operations Manual: OMI6800 Series 15
System
CPU
Intel Celeron N2930 1.83 GHz Quad-Core processor
System Chipset
SoC
System Memory
Onboard DDR3L 4 GB 1600 MHz
I/O Ports
USB
2 x USB 3.0 type A
Serial
COM1: RS-232/422/485 DE-9P (default RS-232)
COM2: RS-232 DE-9P
Audio
1 x 3.5 mm line out
LAN
2 x GbE RJ-45
Power
3-pin connector header, DC power input
Remote Power Switch
2-pin connector header
Storage
Solid State Drive
Options *
32 GB SSD, 1 x 2.5” SATA 2, MLC 64 GB SSD, 1 x 2.5” SATA 2, MLC 128 GB SSD, 1 x 2.5” SATA 2, MLC 256 GB SSD, 1 x 2.5” SATA 2, MLC
SD Card Slot
1 x internal Secure Digital memory card socket, up to 32 GB
Expansion
Expansion Slot
Optional Wi-Fi kit (Wi-Fi card and antenna)
Display
Display Type
15.1” TFT-LCD
Max. Resolution
1024 x 768
Max. Color
16.7 M
Luminance (cd/m²)
450
View Angle (H°/V°)
160/140
Contrast Ratio
800:1
Backlight Lifetime
(hours)
60,000+
Touch Screen
Type
5-wire resistive touch
Interface
USB
Light Transmission
80%
Electrical
Input Voltage
9~36 VDC
Input Current
0.5 ~ 2 A
Input Power
17.8 W
Mechanical
Construction
Silver aluminum front bezel and chassis
Rating
IP66 front panel / NEMA4X
Mounting
Panel mounting, VESA 100 x 100
Dimension (W x H x D)
16.14 x 12.20 x 2.15 inches [410 x 310 x 54.67 mm]
Specifications subject to change without notice.
* Additional SSD options available; contact Maple Systems for details.
** 32-bit or 64-bit must be specified at the time the order is placed.
OMI6815A SPECIFICATIONS
OMI Operations Manual: OMI6800 Series 15
OMI Operations Manual: OMI6800 Series 16
Top View
Front View
Bottom View
Rear View
10.22
[259.5]
15.51
[394.0]
Side View
15.43
[392.0]
10.14
[257.5]
10.93
[277.5]
16.22
[412.0]
IMPORTANT
Dimensions shown are
estimates, and may not work
with your mounting scheme. We
recommend measuring your
actual cutout dimensions for a
proper fit.
0.32
[8.0]
2.00
[50.9]
Cutout Dimensions
A
BDE
LAN 2 COM 1COM 2LAN 1USBLine-OutSW
+
F
Dimensions are in inches [mm]
OMI6816A DIMENSIONS
OMI Operations Manual: OMI6800 Series 16
OMI Operations Manual: OMI6800 Series 17
System
CPU
Intel Celeron N2930 1.83 GHz Quad-Core processor
System Chipset
SoC
System Memory
Onboard DDR3L 4 GB 1600 MHz
I/O Ports
USB
2 x USB 3.0 type A
Serial
COM1: RS-232/422/485 DE-9P (default RS-232)
COM2: RS-232 DE-9P
Audio
1 x 3.5 mm line out
LAN
2 x GbE RJ-45
Power
3-pin connector header, DC power input
Remote Power Switch
2-pin connector header
Storage
Solid State Drive
Options *
32 GB SSD, 1 x 2.5” SATA 2, MLC 64 GB SSD, 1 x 2.5” SATA 2, MLC 128 GB SSD, 1 x 2.5” SATA 2, MLC 256 GB SSD, 1 x 2.5” SATA 2, MLC
SD Card Slot
1 x internal Secure Digital memory card socket, up to 32 GB
Expansion
Expansion Slot
Optional Wi-Fi kit (Wi-Fi card and antenna)
Display
Display Type
15.6” TFT-LCD
Max. Resolution
1366 x 768
Max. Color
16.7 M
Luminance (cd/m²)
300
View Angle (H°/V°)
160/160
Contrast Ratio
500:1
Backlight Lifetime
(hours)
50,000+
Touch Screen
Type
5-wire resistive touch
Interface
USB
Light Transmission
80%
Electrical
Input Voltage
9~36 VDC
Input Current
0.6 ~ 2.2 A
Input Power
21.6 W
Mechanical
Construction
Silver aluminum front bezel and chassis
Rating
IP66 front panel / NEMA4X
Mounting
Panel mounting, VESA 100 x 100
Dimension (W x H x D)
16.23 x 10.93 x 2.37 inches [412 x 277.5 x 60.4 mm]
Specifications subject to change without notice.
* Additional SSD options available; contact Maple Systems for details.
** 32-bit or 64-bit must be specified at the time the order is placed.
OMI6816A SPECIFICATIONS
OMI Operations Manual: OMI6800 Series 17
OMI Operations Manual: OMI6800 Series 18
OMI6818A DIMENSIONS
OMI Operations Manual: OMI6800 Series 18
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.