Mantis lEMBF-9S-C, lEMBF-9S-UH, lEMBF-9S-DO, lEMBF-9S-O, lEMBF-9S-UO Instruction Manual
...
MANTIS MANTEL ASSEMBLY INSTRUCTIONS
(6)11/4” SCREWS
EMBF-9S-(C,DO,O,UH,UO,W)
FULL CABINET MANTEL
INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE AFTER INSTALLATION.
1. Place base in desired location. Place replace on base and
route gas line to replace.
Figure 1
2. Position left side assembly and right side assembly against
base.
3. Position breastboard assembly to the front of left side assembly and right side assembly.
Figure 3
Figure 2
4. Use six (6) 1 1/4" screws to attach breastboard assembly to
left side assembly and right side assembly.
Figure 4
Page 1Empire Comfort Systems, Inc. • 918 Freeburg Avenue • Belleville, IL 62222M10590-0-1009
5. Place Mantis surround ush to the mantel face.
Figure 5
6. Place Mantis slim top assembly onto replace top, making
sure the pegs snap into place.
7. Place top assembly onto left side assembly and right side
assembly.
Figure 7
8. Installation of mantel is completed.
Figure 6
M10590-0-1009Page 2 Empire Comfort Systems, Inc. • 918 Freeburg Avenue • Belleville, IL 62222
Loading...