Manta MM65 User Manual

Instrukcja obsługi
User’s Manual
Freedom Wireless Headphone
MM65
2
MM65
Manual
Instrukcja obsługi
INSTALACJA ........................................................................................................................ 12
BEZPRZEWODOWE SŁUCHAWKI Z MIKROFONEM .........................................13
MONITORING BEZPRZEWODOWY ..............................................................................13
SŁUCHANIE RADIA ................................................................................................................ 13
SŁUCHAWKI PRZEWODOWE BEZ BATERII ..........................................................14
WYMIEŃ BATERIE, JEŚLI MASZ NASTĘPUJĄCE PROBLEMY ..........................15
WYŁĄCZANIE URZĄDZENIA ............................................................................................ 15
SPECYFIKACJA TECHNICZNA .........................................................................................16
UWAGI ..........................................................................................................................................17
MM 65
3
EN
A Receiver
1. Battery compartment cover
2. Volume control (VOL) Power/ Function switch (OFF-Wireless-FM)
3. Scan key (SCAN)
4. Reset key (RESET)
5. Power indicator
6. Audio socket
B Emitter
7. Power indicator (front)
8. Power switch (Tiny frequency modulation)
9. Microphone socket (MIC)
10. Power socket (4.5V DC)
11. Microphone (MIC)
12. Audio cable of emitter
13. Battery compartment (bottom)
MM 65
4
EN
Installation
Installing the receiver: Insert two AAA batteries into the battery compartment according to the + and – polarity. Turn the function switch to the location of WIRELESS or FM. The indicator on the headphone shine to ensure that the headphone work well.
Installing the emitter: Insert two AAA batteries into the battery compartment according to the + and – polarity, Insert audio plug of the emitter into AUDIO-OUT socket of audio source (such as TV set,audio device,PC,DVD player,CD player,MP3 palyer etc).
Operation
Wireless headphone
Please see Fig.1, Insert the emitter audio cable into the AUDIO-OUT socket of the electronic device and turn the fuction switch of the emitter to the “Wireless Headphone” position, then the emitter indicator shine.
Built in the battery on the emitter and the receiver, turn the rece­iver power switch to the “ON” position, the indicator of the head­phone go on. Put the volume control to a suitable position, press the “RESET” then “SCAN” button adjust the tiny modulation on the receiver (Headphone) till getting a best eect.
MM 65
5
EN
Wireless net audio chat
Connect the emitter audio cable into the audio out socket of the PC, then insert one end of the audio cable (Optional) into the microphone socket (MIC) on the emitter, and insert the other end into the microphone in socket of the PC (see Fig.2)
Turn on the power switch of the emitter, then the indicator go on well, put the out-built MIC forward yourself and keep away with the distance of 0.5M (see Fig.2).
Open your chat tool and turn the switch to the “audio chat” posi­tion, turn on the receiver then the indicator of the headphone go on well. Adjust the volume to the suitable position, then headpho­ne can receive the sound via the SKYPE/MSN/QQ from your friends in the other end.
Wireless Monitoring
Place the emitter near baby and old people etc. Put the out-built Micro phone forward monitor.
Turn the power switch of the emitter to “MONITOR” the indicator bright.
Turn the power switch of the receiver (ON/OFF) the indicator bright. Press the “RESET”, then the “SCAN” button, the sound of the monitor can be heard by receiver.
Listen to the radio
The receiver can be used separately as an FM radio. Turn on the receiver, press the “RESET” once, then press the “SCAN” key in turn to search a higher range and lock one radio channel; when the highest range is reached, press “RESET” key, and the frequency returns to the lowest range. Press “SCAN” key again, and the receiver will search the radio channels from the low range again.
MM 65
6
EN
Wired headphone (without batteries)
Insert one end of the audio cable (optional) into the audio socket of the receiver (see Fig.4), and insert the other end into the headphone socket of the electronic devices, such as MP3 player, CD player, DVD player, and then the unit can be used as a wired headphone.
Loading...
+ 12 hidden pages